Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.Price: EUR 95.00
The journal International Shipbuilding Progress (ISP) was founded in 1954. Each year two issues appear (in March and September). Publications submitted to ISP should describe scientific work of high international standards, advancing subjects related to the field of Marine Technology, such as:
- Concept development
- General design of ships and offshore objects
- Ship and offshore structural design
- Hydro-mechanics and -dynamics
- Maritime engineering and machinery systems
- Production processes of all types of ships and other objects intended for marine use
- Production technology and material science
- Shipping science, economics, and all directly related subjects
- Ship operations
- Offshore and ocean engineering in relation to the marine environment
- Marine safety
- Efficiency, lifecycle, and environment
- Ice-related aspects for ships and offshore objects.
The contents of the papers may be of a fundamental or of an applied scientific nature and must be of the highest novelty and rigor.
Authors: Zoller, R.E.
Article Type: Research Article
Abstract: An extended surface consisting of studs resistance-welded to 1 ( 1 / ( / 2 in. tubes was hurriedly conceived for naval economizers during the war. Minor modifications have met the needs of nuclear heat exchangers and modern merchant and fighting ships. Its use in many well-known fleets is first enumerated followed by a discussion of the different requirements of nuclear-power plant. Sixteen different designs of extended surface were tested in clean conditions, some being repeated on wider spacings, staggered and in-line. Each test series is analysed by means of simplified heat-transfer and …draught-loss formulae enabling interpolation to design various tube banks. The various surfaces are compared by calculating the characteristic dimensions of heat exchangers with identical performance. Finally the laboratory tests are compared with the trial results of economizers on highly rated boilers. Show more
Citation: International Shipbuilding Progress, vol. 5, no. 42, pp. 51-66, 1958
Article Type: Research Article
Abstract: The paper, with a reference to the economics of blade manufacture, explains the reasons for the main series of tests, which were carried out at the National Gas Turbine Establishment, the material being supplied by C.A. Parsons and Company, Limited. Four series of tests are described in detail. Various combinations of shrouding and tip clearance were investigated, untwisted constant-section blading being used in the first three series. The experiments were carried out over a range of shrouding leakage clearances, and also included an investigation of the boundary layer flow on the convex surface of a stator blade in the compressor. …A brief review of published work on the effects of normal radial tip clearance is followed by a description of some early results obtained on a multi-stage compressor. It is concluded that shrouding of the type investigated should, if possible, be avoided, especially under certain aerodynamic conditions. If it is necessary that it be used, the clearance should be maintained at the smallest practicable value. The use of very fine radial tip clearances may also result in a loss of performance, although values in excess of 1 per cent. of the blade height are also shown to be undesirable in the particular case investigated. Show more
Citation: International Shipbuilding Progress, vol. 5, no. 42, pp. 78-101, 1958
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
Free service line: 400 661 8717
Fax: +86 10 8446 7947
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]