Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Papers from the 29th Symposium on Naval Hydrodynamics, 26–31 August 2012, Gothenburg, Sweden
Article type: Research Article
Authors: Fu, T.C.; | O'Shea, T.T. | Judge, C.Q. | Dommermuth, D. | Brucker, K. | Wyatt, D.C.
Affiliations: Naval Surface Warfare Center, Carderock Division, West Bethesda, MD, USA | Science Applications International Corporation, McLean, VA, USA | United States Naval Academy, Annapolis, MD, USA
Note: [] Corresponding author. E-mail: [email protected]
Abstract: Over the past few years much progress has been made in Computational Fluid Dynamics (CFD) in its ability to accurately simulate the hydrodynamics associated with a deep-V monohull planing craft. This work has focused on not only predicting the hydrodynamic forces and moments, but also the complex multiphase free-surface flow field generated by a deep-V monohull planing boat at high Froude numbers. One of these state of the art CFD codes is Numerical Flow Analysis (NFA). NFA provides turnkey capabilities to model breaking waves around a ship, including both plunging and spilling breaking waves, the formation of spray and the entrainment of air. NFA uses a Cartesian-grid formulation with immersed body and volume-of-fluid methods. The focus of this paper is to describe and document a recent effort to assess NFA for the prediction of deep-V planing craft hydrodynamic forces and moments and evaluate how well it models the complex multiphase flows associated with high Froude number flows, specifically the formation of the spray sheet. This detailed validation effort was composed of three parts. The first part focused on assessing NFA's ability to predict pressures on the surface of a 10 degree deadrise wedge during impact with an undisturbed free surface. Detailed comparisons to pressure gauges are presented here for two different drop heights, 15.24 cm (6 in) and 25.4 cm (10 in). Results show NFA accurately predicted pressures during the slamming event. The second part examines NFA's ability to match sinkage, trim and resistance from Fridsma's experiments performed on constant deadrise planing hulls. Simulations were performed on two 20 degree deadrise hullforms of varying length to beam ratios (4 and 5) over a range of speed-length ratios (2, 3, 4, 5 and 6). Results show good agreement with experimentally measured values, as well as values calculated using Savitsky's parametric equations. The final part of the validation study focused on assessing how well NFA was able to accurately model the complex multiphase flow associated with high Froude number flows, specifically the formation of the spray sheet. NFA simulations of a planing hull fixed at various angles of roll (0, 10, 20 and 30 degrees) were compared to experiments. Comparisons to underwater photographs illustrate NFA's ability to model the formation of the spray sheet and the free surface turbulence associated with planing boat hydrodynamics. Overall these three validation studies provide a detailed assessment on the current capabilities of NFA to predict the hydrodynamics of a deep-V planing hull.
Keywords: CFD, planing craft, hydrodynamics
DOI: 10.3233/ISP-130087
Journal: International Shipbuilding Progress, vol. 60, no. 1-4, pp. 143-169, 2013
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]