Bio-Medical Materials and Engineering - Volume 24, issue 6

Authors: Ergen, Burhan | Baykara, Muhammet

Article Type: Research Article

Abstract: The developments of content based image retrieval (CBIR) systems used for image archiving are continued and one of the important research topics. Although some studies have been presented general image achieving, proposed CBIR systems for archiving of medical images are not very efficient. In presented study, it is examined the retrieval efficiency rate of spatial methods used for feature extraction for medical image retrieval systems. The investigated algorithms in this study depend on gray level co-occurrence matrix (GLCM), gray level run length matrix (GLRLM), and Gabor wavelet accepted as spatial methods. In the experiments, the database is built including hundreds …of medical images such as brain, lung, sinus, and bone. The results obtained in this study shows that queries based on statistics obtained from GLCM are satisfied. However, it is observed that Gabor Wavelet has been the most effective and accurate method. Show more

Keywords: Content-based image retrieval, GLCM, GLRLM, Gabor wavelet

DOI: 10.3233/BME-141127

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3055-3062, 2014

Authors: Yuan, Zhen | Ieong, Fong H. | Jiang, Huabei | Sobel, Eric S.

Article Type: Research Article

Abstract: The goal of this study is to capture the quantitative optical features of degenerative finger joints based on x-ray aided three-dimensional (3D) diffuse optical tomography (DOT). It is anticipated that the fused imaging technique can be applied to identifying the significant differences between osteoarthritis (OA) and psoriatic arthritis (PA). For a case study, total 6 subjects were selected to study the distal interphalangeal (DIP) finger joints. 2 OA patients, 2 PA patients and 2 healthy subjects were examined clinically first. Their DIP finger joints were then scanned by the multimodality imaging method. Our findings suggested that the developed multimodality imaging …approach may aid to contradistinguish OA patients from PA patients with the healthy control, which is essential for a better diagnosis and treatment of inflammatory arthritis in humans. Show more

Keywords: diffuse optical tomography, osteoarthritis, psoriatic arthritis, x-ray

DOI: 10.3233/BME-141128

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3063-3071, 2014

Authors: Zhai, Yi | Wang, Yan | Wang, Zhaoqi | Liu, Yongji | Zhang, Lin | He, Yuanqing | Chang, Shengjiang

Article Type: Research Article

Abstract: An achromatic element eliminating only longitudinal chromatic aberration (LCA) while maintaining transverse chromatic aberration (TCA) is established for the eye model, which involves the angle formed by the visual and optical axis. To investigate the impacts of higher-order aberrations on vision, the actual data of higher-order aberrations of human eyes with three typical levels are introduced into the eye model along visual axis. Moreover, three kinds of individual eye models are established to investigate the impacts of higher-order aberrations, chromatic aberration (LCA+TCA), LCA and TCA on vision under the photopic condition, respectively. Results show that for most human eyes, the …impact of chromatic aberration on vision is much stronger than that of higher-order aberrations, and the impact of LCA in chromatic aberration dominates. The impact of TCA is approximately equal to that of normal level higher-order aberrations and it can be ignored when LCA exists. Show more

Keywords: Visual optics, eye model, optical design, optical effects on vision, aberrations

DOI: 10.3233/BME-141129

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3073-3081, 2014

Authors: Chan, Yu-Chen

Article Type: Research Article

Abstract: Although considerable attention has been paid to the cognitive structure of humor, its emotional structure tends to be overlooked. Humor is often associated with the single emotion of mirth or amusement, while other aspects of its rich emotional structure are ignored. The purpose of the present study was to explore this structure by analyzing the content of a Taiwanese corpus of 204 ‘negative’ jokes to identify the basic emotion was induced and the emotional shift pattern of the joke. Additionally, the corpus might be used to compare emotional reversal jokes (negative to positive emotion) and regular jokes (neutral to positive …emotion) as an aid when preparing materials for use in functional Magnetic Resonance Imaging (fMRI) investigations on the neural substrates of humor. In terms of basic emotions, 82 fear jokes, 61 disgust jokes, 42 sadness jokes and 19 anger jokes were found. The most common type of emotional shift was from negative to positive, with the punch lines of 114 jokes providing relief from the negative emotion by either diverting attention away from it or dissolving it entirely. Show more

Keywords: Joke corpus, emotional reversal, emotional shift pattern, negative joke, humor

DOI: 10.3233/BME-141130

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3083-3090, 2014

Authors: Yoo, Ie Ryung | Chung, Soo Kyo | Park, Hye Lim | Choi, Woo Hee | Kim, Young Kyoon | Lee, Kyo Young | Wang, Young-Pil

Article Type: Research Article

Abstract: This paper aimed to evaluate the prognostic value of maximum standardized uptake value (SUVmax) and metabolic tumor volume (MTV) of the primary tumor on 18 F-FDG PET/CT scan in early stage non-small cell cancer (NSCLC) patients without lymph node (LN) metastasis. In the experiment, eighty NSCLC patients pathologically staged as T1N0 or T2N0 were included (M:F=50:30; mean age, 64.8 years). All patients had preoperative 18 F-FDG PET/CT scan and curative surgery. FDG uptake in the primary tumor was measured by SUVmax and MTV with various SUV threshold values. SUVmax, MTV of the primary tumor, age, tumor size, histology and differentiation …grade were analyzed for association with disease-free survival (DFS). The experimental results showed that the histology types included adenocarcinoma (n=58), squamous cell carcinoma (n=20), and others (n=2); Twenty-two (27.5%) of the 80 patients had a recurrence during follow-up at a median time of 29.1 months; The median SUVmax was 5.26, and the median MTV2.5 was 2.2 cm3 . Univariate analysis showed higher SUVmax (>4), greater MTV (MTV2.5 >4 cm3 ), and non-squamous histology were significantly associated with shorter period DFS (p=0.001, p=0.030 and p<0.001). In multivariate analysis, higher SUVmax (p=0.004) and adenocarcinoma histology (p=0.005) were associated with shorter DFS. Therefore, high SUVmax (>4) of the primary tumor on preoperative 18 F-FDG PET/CT scan is an independent prognostic factor of shorter DFS in early stage of NSCLC. Show more

Keywords: Non-small-cell lung cancer, PET/CT, standardized uptake value, metabolic tumor volume, early stage

DOI: 10.3233/BME-141131

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3091-3103, 2014

Authors: Fu, Jian | Yu, Guangyuan | Fan, Dekai

Article Type: Research Article

Abstract: X-ray phase contrast computed tomography (CT) uses the phase shift that x-rays undergo when passing through matter, rather than their attenuation, as the imaging signal and may provide better image quality in soft-tissue and biomedical materials with low atomic number. Here a geometry-constraint-scan imaging technique for in-line phase contrast micro-CT is reported. It consists of two circular-trajectory scans with x-ray detector at different positions, the phase projection extraction method with the Fresnel free-propagation theory and the filter back-projection reconstruction algorithm. This method removes the contact-detector scan and the pure phase object assumption in classical in-line phase contrast Micro-CT. Consequently it …relaxes the experimental conditions and improves the image contrast. This work comprises a numerical study of this technique and its experimental verification using a biomedical composite dataset measured at an x-ray tube source Micro-CT setup. The numerical and experimental results demonstrate the validity of the presented method. It will be of interest for a wide range of in-line phase contrast Micro-CT applications in biology and medicine. Show more

Keywords: X-ray in-line phase contrast imaging, micro computed tomography, geometry-constraint scanning mode, reconstruction algorithm

DOI: 10.3233/BME-141132

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3105-3111, 2014

Authors: Cui, Xueli | Gao, Xin | Xia, Wei | Liu, Yangchuan | Liang, Zhiyuan

Article Type: Research Article

Abstract: To build a patient specific respiratory motion model with a low dose, a novel method was proposed that uses a limited number of 3D lung CT volumes with an external respiratory signal. 4D lung CT volumes were acquired for patients with in vitro labeling on the upper abdominal surface. Meanwhile, 3D coordinates of in vitro labeling were measured as external respiratory signals. A sequential correspondence between the 4D lung CT and the external respiratory signal was built using the distance correlation method, and a 3D displacement for every registration control point in the CT volumes with respect to time can …be obtained by the 4D lung CT deformable registration. A temporal fitting was performed for every registration control point displacements and an external respiratory signal in the anterior-posterior direction respectively to draw their fitting curves. Finally, a linear regression was used to fit the corresponding samples of the control point displacement fitting curves and the external respiratory signal fitting curve to finish the pulmonary respiration modeling. Compared to a B-spline-based method using the respiratory signal phase, the proposed method is highly advantageous as it offers comparable modeling accuracy and target modeling error (TME); while at the same time, the proposed method requires 70% less 3D lung CTs. When using a similar amount of 3D lung CT data, the mean of the proposed method's TME is smaller than the mean of the PCA (principle component analysis)-based methods' TMEs. The results indicate that the proposed method is successful in striking a balance between modeling accuracy and number of 3D lung CT volumes. Show more

Keywords: Motion model, 4D lung CT, external respiratory signal, deformable registration, temporal fitting

DOI: 10.3233/BME-141133

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3113-3120, 2014

Authors: Shi, Han | Du, Dong | Su, Zhihong | Peng, Qiyu

Article Type: Research Article

Abstract: Positron Emission Tomography (PET) systems using detectors with Depth of Interaction (DOI) capabilities could achieve higher spatial resolution and better image quality than those without DOI. Up till now, most DOI methods developed are not cost-efficient for a whole body PET system. In this paper, we present a DOI decoding method based on flood map for low-cost conventional block detector with four-PMT readout. Using this method, the DOI information can be directly extracted from the DOI-related crystal spot deformation in the flood map. GATE simulations are then carried out to validate the method, confirming a DOI sorting accuracy of 85.27%. …Therefore, we conclude that this method has the potential to be applied in conventional detectors to achieve a reasonable DOI measurement without dramatically increasing their complexity and cost of an entire PET system. Show more

Keywords: Positron emission tomography, depth of interaction, GATE simulation

DOI: 10.3233/BME-141134

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3121-3127, 2014

Authors: Qiao, Huiting | Wang, Libin | Li, Deyu | Wang, Daifa | Wang, Yu

Article Type: Research Article

Abstract: Positron emission tomography (PET) has been widely used in early diagnosis of tumors. Though standardized uptake value (SUV) is a common diagnosis index for PET, it will be affected by the size of the tumor. To explore how the tumor size affects imaging diagnosis index, dynamic PET images were simulated to study the relationship between tumor size and the imaging diagnosis index. It was found that the SUV of the region of the tumor varied with scan time, and the SUV was always lower than the true value of tumor. Even more deviations were found in SUV with a reduced …tumor size. The diagnosis index SUVmax was more reliable than SUV, for it declined only when the volume of tumor was less than 3 mm3 . Therefore, the effect of tumor size on the SUV and SUVmax that are used as diagnosis indices in the early diagnosis of tumors should not be neglected. Show more

Keywords: Standardized uptake value, maximum standardized uptake value, positron emission tomography, tumor size, diagnosis

DOI: 10.3233/BME-141135

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3129-3136, 2014

Authors: Yong, Jin Rim | Qi, Shouliang | van Triest, Han J.W. | Kang, Yan | Qian, Wei

Article Type: Research Article

Abstract: Extraction of lung tumors is a fundamental step for further quantitative analysis of the tumor, but is challenging for juxta-pleural tumors due to the adhesion to the pleurae. An automatic algorithm for segmentation of juxta-pleural tumors based on the analysis of the geometric and morphological features was proposed. Initially, the lung is extracted by means of thresholding using 2D Otsu's method. Next a center point is suggested to find a starting point and endpoint of outward facing pleura. A model based on the variation of incline angle was adopted to identify potentially affected regions, and to full segment juxta-pleural tumors. …The results were compared with the manual segmentation by two radiologists. Averaged for ten experimental datasets, the accuracy calculated by Dice index between the results of the algorithm and by the two radiologists is 91.2%. It indicates the proposed method has comparable accuracy with the experts (the inter-observer variability is 92.4%), but requests much less manual interactions. The proposed algorithm can be used for segmenting juxta-pleural tumors from CT images, and help improve the diagnosis, pre-operative planning and therapy response evaluation. Show more

Keywords: Juxta-pleural tumor segmentation, morphological analysis, incline angle

DOI: 10.3233/BME-141136

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3137-3144, 2014

Authors: Gan, Hong-Seng | Tan, Tian-Swee | Wong, Liang-Xuan | Tham, Weng-Kit | Sayuti, Khairil Amir | Abdul Karim, Ahmad Helmy | bin Abdul Kadir, Mohammed Rafiq

Article Type: Research Article

Abstract: In medical image segmentation, manual segmentation is considered both labor- and time-intensive while automated segmentation often fails to segment anatomically intricate structure accordingly. Interactive segmentation can tackle shortcomings reported by previous segmentation approaches through user intervention. To better reflect user intention, development of suitable editing functions is critical. In this paper, we propose an interactive knee cartilage extraction software that covers three important features: intuitiveness, speed, and convenience. The segmentation is performed using multi-label random walks algorithm. Our segmentation software is simple to use, intuitive to normal and osteoarthritic image segmentation and efficient using only two third of manual segmentation's …time. Future works will extend this software to three dimensional segmentation and quantitative analysis. Show more

Keywords: Interactive segmentation, Knee cartilage, Magnetic resonance image, Random walks, User interface

DOI: 10.3233/BME-141137

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3145-3157, 2014

Authors: Liu, Hao | Zhao, Jianning | Dai, Ning | Qian, Hongbo | Tang, Yuehong

Article Type: Research Article

Abstract: Separation of the femur head and acetabulum is one of main difficulties in the diseased hip joint due to deformed shapes and extreme narrowness of the joint space. To improve the segmentation accuracy is the key point of existing automatic or semi-automatic segmentation methods. In this paper, we propose a new method to improve the accuracy of the segmented acetabulum using surface fitting techniques, which essentially consists of three parts: (1) design a surface iterative process to obtain an optimization surface; (2) change the ellipsoid fitting to two-phase quadric surface fitting; (3) bring in a normal matching method and an …optimization region method to capture edge points for the fitting quadric surface. Furthermore, this paper cited vivo CT data sets of 40 actual patients (with 79 hip joints). Test results for these clinical cases show that: (1) the average error of the quadric surface fitting method is 2.3 (mm); (2) the accuracy ratio of automatically recognized contours is larger than 89.4%; (3) the error ratio of section contours is less than 10% for acetabulums without severe malformation and less than 30% for acetabulums with severe malformation. Compared with similar methods, the accuracy of our method, which is applied in a software system, is significantly enhanced. Show more

Keywords: Acetabulum, segmentation, ellipsoid fitting, edge points, computer tomography

DOI: 10.3233/BME-141138

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3159-3177, 2014

Authors: Jia, Tong | Zhang, Hao | Meng, Haixiu

Article Type: Research Article

Abstract: Lung vessels often interfere with the detection of lung nodules. In this paper, a novel computer-aided lung nodule detection scheme on vessel segmentation is proposed. This paper describes an active contour model which can combine image region mean gray value and image edge energy. It is used to segment and remove lung vessels. A selective shape filter based on Hessian Matrix is used to detect suspicious nodules and remove omitted lung vessels. This paper extracts density, shape and position features of suspicious nodules, and uses a Rule-Based Classification (RBC) method to identify true positive nodules. In the experiment results, the …detection sensitivity is about 90% and FP is 1/scan. Show more

Keywords: Lung vessel segmentation, lung nodule detection, active contour model, CT image

DOI: 10.3233/BME-141139

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3179-3186, 2014

Authors: Mao, Yihao | Liu, Hong | Ye, Rong | Shi, Yonghong | Song, Zhijian

Article Type: Research Article

Abstract: Plaque assaying, measurement of the number, diameter, and area of plaques in a Petri dish image, is a standard procedure gauging the concentration of phage in biology. This paper presented a novel and effective method for implementing automatic plaque assaying. The method was mainly comprised of the following steps: In the training stage, after pre-processing the images for noise suppression, an initial training set was readied by sampling positive (with a plaque at the center) and negative (plaque-free) patches from the training images, and extracting the HOG features from each patch. The linear SVM classifier was trained in a self-learnt …supervised learning strategy to avoid possible missing detection. Specifically, the training set which contained positive and negative patches sampled manually from training images was used to train the preliminary classifier which exhaustively searched the training images to predict the label for the unlabeled patches. The mislabeled patches were evaluated by experts and relabeled. And all the newly labeled patches and their corresponding HOG features were added to the initial training set to train the final classifier. In the testing stage, a sliding-window technique was first applied to the unseen image for obtaining HOG features, which were inputted into the classifier to predict whether the patch was positive. Second, a locally adaptive Otsu method was performed on the positive patches to segment the plaques. Finally, after removing the outliers, the parameters of the plaques were measured in the segmented plaques. The experimental results demonstrated that the accuracy of the proposed method was similar to the one measured manually by experts, but it took less than 30 seconds. Show more

Keywords: Plaque assay, HOG, SVM, local adaptive image segmentation

DOI: 10.3233/BME-141140

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3187-3198, 2014

Authors: Wu, Huiqun | Geng, Xingyun | Zhang, Xiaofeng | Qiu, Mingyan | Jiang, Kui | Tang, Lemin | Dong, Jiancheng

Article Type: Research Article

Abstract: The optic disc (OD) is one of the important anatomic structures on the retina, the changes of which shape and area may indicate disease processes, thus needs computerized quantification assistance. In this study, we proposed a self-adaptive distance regularized level set evolution method for OD segmentation without the periodically re-initializing steps in the level set function execution to a signed distance function during the evolution. In that framework, preprocessing of an image was performed using Fourier correlation coefficient filtering to obtain initial boundary as the beginning contour, then, an accurate boundary of the optic disc was obtained using the self-adaptive …distance regularized level set evolution method. One hundred eye fundus color numerical images from public database were selected to validate our algorithm. Therefore, we believe that such automatic OD segmentation method could assist the ophthalmologist to segment OD more efficiently, which is of significance for future computer-aided early detection of glaucoma and retinopathy diseases. Show more

Keywords: Optic disk, retinal imaging, level set evolution, imaging informatics

DOI: 10.3233/BME-141141

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3199-3206, 2014

Authors: Li, Fang | Song, Zhijian

Article Type: Research Article

Abstract: Surface registration is widely used in image-guided neurosurgery to achieve spatial registration between the patient space and the image space. Coarse registration, followed by fine registration, is an important premise to ensure the robustness and efficiency of surface registration. In this paper, a coarse registration algorithm based on the principal axes is proposed to achieve this goal. The extraction of the principal axes relies on the approximated surface with an adaptive Gaussian kernel, the width of which is consistent with neighborhood relation so that it is applicable for various scanning data. Determining the corresponding centers of translation is another problem …for aligning different scanning data, which is solved through heuristics. Six pairs of points on two surfaces with the farthest projections on the principal axes were regarded as the candidates of translation centers, and then through tentative alignments of local regions around them, a pair of candidates with the minimum registration error was selected as the optimal translation centers. Automatic registration of two scans of a head phantom is presented in this paper. Experimental results confirmed the robustness of the algorithm and its feasibility in clinical applications. Show more

Keywords: Image-guided neurosurgery, coarse registration, principal axes, adaptive Gaussian kernel, heuristics

DOI: 10.3233/BME-141142

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3207-3214, 2014

Authors: Guo, Song | Luan, Fangjun | Song, Xiaoyu | Li, Changyou

Article Type: Research Article

Abstract: To better analyze images with the Gaussian white noise, it is necessary to remove the noise before image processing. In this paper, we propose a self-adaptive image denoising method based on bidimensional empirical mode decomposition (BEMD). Firstly, normal probability plot confirms that 2D-IMF of Gaussian white noise images decomposed by BEMD follow the normal distribution. Secondly, energy estimation equation of the ith 2D-IMF (i=2,3,4,......) is proposed referencing that of ith IMF (i=2,3,4,......) obtained by empirical mode decomposition (EMD). Thirdly, the self-adaptive threshold of each 2D-IMF is calculated. Eventually, the algorithm of the self-adaptive image denoising method based on BEMD is …described. From the practical perspective, this is applied for denoising of the magnetic resonance images (MRI) of the brain. And the results show it has a better denoising performance compared with other methods. Show more

Keywords: Image denoising, BEMD, self-adaption, Gaussian white noise, energy

DOI: 10.3233/BME-141143

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3215-3222, 2014

Authors: Geng, Lei | Shao, Yi-Ting | Xiao, Zhi-Tao | Zhang, Fang | Wu, Jun | Li, Min | Shan, Chun-Yan

Article Type: Research Article

Abstract: It has been demonstrated that shape, area and depth of the optic disc are relevant indices of diabetic retinopathy. In this paper, we present a new fundus optic disc localization and segmentation method based on phase congruency (PC). Firstly, in order to highlight the optic disc, channel images with the highest contrast between optic disc and background are selected in LAB, YUV, YIQ and HSV spaces respectively. Secondly, with the use of PC, features of four selected channel images can be extracted. Multiplication operation is then used to enhance PC detection results. Thirdly, window scanning and gray accumulating are utilized …to locate the optic disc. Finally, iterative OTSU automatic threshold segmentation and Hough transform are performed on location images, before the final optic disc segmentation result can be obtained. The experimental results showed that the proposed method can effectively and accurately perform optic disc location and segmentation. Show more

Keywords: Fundus image, phase congruency, optic disc localization, optic disc segmentation, diabetic retinopathy

DOI: 10.3233/BME-141144

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3223-3229, 2014

Authors: Cong, Jinyu | Wei, Benzheng | Yin, Yilong | Xi, Xiaoming | Zheng, Yuanjie

Article Type: Research Article

Abstract: Simple Linear Iterative Clustering (SLIC) algorithm is increasingly applied to different kinds of image processing because of its excellent perceptually meaningful characteristics. In order to better meet the needs of medical image processing and provide technical reference for SLIC on the application of medical image segmentation, two indicators of boundary accuracy and superpixel uniformity are introduced with other indicators to systematically analyze the performance of SLIC algorithm, compared with Normalized cuts and Turbopixels algorithm. The extensive experimental results show that SLIC is faster and less sensitive to the image type and the setting superpixel number than other similar algorithms such …as Turbopixels and Normalized cuts algorithms. And it also has a great benefit to the boundary recall, the robustness of fuzzy boundary, the setting superpixel size and the segmentation performance on medical image segmentation. Show more

Keywords: Medical image, superpixels, SLIC, image segmentation, performance evaluation

DOI: 10.3233/BME-141145

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3231-3238, 2014

Authors: Bian, Zijian | Tan, Wenjun | Yang, Jinzhu | Liu, Jiren | Zhao, Dazhe

Article Type: Research Article

Abstract: The quantitative analysis of the airway tree is of critical importance in the CT-based diagnosis and treatment of popular pulmonary diseases. The extraction of airway centerline is a precursor to identify airway hierarchical structure, measure geometrical parameters, and guide visualized detection. Traditional methods suffer from extra branches and circles due to incomplete segmentation results, which induce false analysis in applications. This paper proposed an automatic and robust centerline extraction method for airway tree. First, the centerline is located based on the topological thinning method; border voxels are deleted symmetrically to preserve topological and geometrical properties iteratively. Second, the structural information …is generated using graph-theoretic analysis. Then inaccurate circles are removed with a distance weighting strategy, and extra branches are pruned according to clinical anatomic knowledge. The centerline region without false appendices is eventually determined after the described phases. Experimental results show that the proposed method identifies more than 96% branches and keep consistency across different cases and achieves superior circle-free structure and centrality. Show more

Keywords: Airway tree, centerline extraction, topological thinning, graph-theoretic analysis

DOI: 10.3233/BME-141146

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3239-3249, 2014

Authors: Geng, Chen | Yang, Jian | Dai, Yakang | Liu, Zhaobang | Dong, Yuefang

Article Type: Research Article

Abstract: Computed tomography angiography (CTA) is a major noninvasive technology for imaging coronary artery disease, and effective and accurate vessel tracking method can help radiologists diagnose the disease more accurately. In this paper, a novel 3D vessel tracking method based on CTA data is presented. The method is comprised of preprocessing, a novel spherical operator, and hierarchical clustering, where the spherical operator consists of rays that are casted different directions in a spherical coordinate system. The vascular boundary is extracted by the spherical operator, and the tracking direction is also obtained by the hierarchical clustering. The method is evaluated with the …Rotterdam Coronary Artery Algorithm Evaluation Framework. Results indicate that our method outperforms current state-of-the-art methods in terms of the overlap ratio on the vessel tracking of coronary arteries in CTA data. Show more

Keywords: 3D vessel tracking, spherical operator, hierarchical clustering

DOI: 10.3233/BME-141147

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3251-3258, 2014

Authors: Zhang, Zulin | Yi, Xinzhong | Peng, Hong

Article Type: Research Article

Abstract: This paper proposes a tissue membrane system-based framework to deal with the optimal image fusion problem. A spatial domain fusion algorithm is given, and a tissue membrane system of multiple cells is used as its computing framework. Based on the multicellular structure and inherent communication mechanism of the tissue membrane system, an improved velocity-position model is developed. The performance of the fusion framework is studied with comparison of several traditional fusion methods as well as genetic algorithm (GA)-based and differential evolution (DE)-based spatial domain fusion methods. Experimental results show that the proposed fusion framework is superior or comparable to the …other methods and can be efficiently used for image fusion. Show more

Keywords: Membrane computing, membrane systems, tissue membrane systems, image fusion

DOI: 10.3233/BME-141148

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3259-3266, 2014

Authors: Yang, Jinzhu | Ma, Shuang | Sun, Qi | Tan, Wenjun | Xu, Mengjia | Chen, Nan | Zhao, Dazhe

Article Type: Research Article

Abstract: Traditional Hessian multiscale filter consider only the local geometric feature but not the global grayscale information. In medical image analysis, Hessian filter is usually used to enhance the blood vessels. However, it also produces some pseudo vascular structures or some isolate noise points, such as the nasal soft tissues that have the similar shape with the vessels in MRA data, which will increase the difficulty of cerebrovascular segmentation. To resolve this issue, an improved Hessian multiscale filter is proposed in this paper. An image grayscale factor is added to the vascular similarity function computed by Hessian matrix eigenvalue. This method …is experimented on brain MRA data and lung CTA data. Experimental results show that this method can enhance vascular structures, and simultaneously reduce the appearance of the pseudo vascular structures and the isolated noise points. Show more

Keywords: Hessian filter, multiscale enhancement, grayscale, CT image, MRA image

DOI: 10.3233/BME-141149

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3267-3275, 2014

Authors: Li, Hong | Liu, Kaihua | Sun, Hang | Bao, Nan | Wang, Xu | Tian, Shi | Qi, Shouliang | Kang, Yan

Article Type: Research Article

Abstract: Computed tomography (CT) radiation dose can be reduced significantly by region of interest (ROI) CT scan. Automatically positioning the heart in CT scout images is an essential step to realize the ROI CT scan of the heart. This paper proposed a fully automatic heart positioning method in CT scout image, including the anteroposterior (A-P) scout image and lateral scout image. The key steps were to determine the feature points of the heart and obtaining part of the heart boundary on the A-P scout image, and then transform the part of the boundary into polar coordinate system and obtain the whole …boundary of the heart using slant elliptic equation curve fitting. For heart positioning on the lateral image, the top and bottom boundary obtained from A-P image can be inherited. The proposed method was tested on a clinical routine dataset of 30 cases (30 A-P scout images and 30 lateral scout images). Experimental results show that 26 cases of the dataset have achieved a very good positioning result of the heart both in the A-P scout image and the lateral scout image. The method may be helpful for ROI CT scan of the heart. Show more

Keywords: CT scout, heart positioning, ROI scan, automatic positioning method

DOI: 10.3233/BME-141150

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3277-3286, 2014

Authors: Nawaz, Shoukat | Fu, Jian | Fan, Dekai

Article Type: Research Article

Abstract: X-ray computed tomography (CT) is a powerful clinical diagnosis tool and has been used widely in many clinical and biological settings. Metal artifacts, caused by high density implants, are commonly encountered in clinical CT applications, thereby affecting the detection of abnormal structures and undermining CT's diagnostic value. In this paper, we developed a metal artifact reduction approach based on image segmentation and forward-projection. We further demonstrate the usefulness of our approach by using a biomedical specimen consisting of muscles, bones and metals. Our aim is to remove the inaccurate metal artifact pixels in the original CT slices and exactly reconstruct …the soft-tissue using the forward projections with no metal information. During the reconstruction, artifacts are reduced by replacing the metal projection using the forward projection. The presented work is of interest for CT biomedical applications. Show more

Keywords: Computed tomography, metal artifacts, image segmentation, forward-projection

DOI: 10.3233/BME-141151

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3287-3293, 2014

Authors: Lee, Gihyoun | Na, Sung Dae | Cho, Jin-Ho | Kim, Myoung Nam

Article Type: Research Article

Abstract: This paper presents a voice activity detection (VAD) approach using a perceptual wavelet entropy neighbor slope (PWENS) in a low signal-to-noise (SNR) environment and with a variety of noise types. The basis for our study is to use acoustic features that have large entropy variance for each wavelet critical band. The speech signal is decomposed by the proposed perceptual wavelet packet decomposition (PWPD), and the VAD function is extracted by PWENS. Finally, VAD is decided by the proposed VAD decision rule using two memory buffers. In order to evaluate the performance of the VAD decision, many speech samples and a …variety of SNR conditions were used in the experiment. The performance of the VAD decision is confirmed using objective indexes such as a graph of the VAD decision and the relative error rate. Show more

Keywords: Voice activity detection, wavelet transform, wavelet decomposition, neighbor slope, entropy

DOI: 10.3233/BME-141152

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3295-3301, 2014

Authors: Na, Sung Dae | Lee, Gihyoun | Lee, Jyung Hyun | Kim, Myoung Nam

Article Type: Research Article

Abstract: In this paper, a new method for individual tooth segmentation was proposed. The proposed method is composed of enhancement and extraction of boundary and seed of watershed algorithm using trisection areas by morphological characteristic of teeth. The watershed algorithm is one of the conventional methods for tooth segmentation; however, the method has some problems. First, molar region detection ratio is reduced because of oral structure features that is low intensities in molar region. Second, inaccurate segmentation occurs in incisor region owing to specular reflection. To solve the problems, the trisection method using morphological characteristic was proposed, where three tooth areas …are made using ratio of entire tooth to each tooth. Moreover, the enhancement is to improve the intensity of molar using the proposed method. In addition, boundary and seed of watershed are extracted using trisection areas applied other parameters each area. Finally, individual tooth segmentation was performed using extracted boundary and seed. Furthermore, the proposed method was compared with conventional methods to confirm its efficiency. As a result, the proposed method was demonstrated to have higher detection ratio, better over segmentation, and overlap segmentation than conventional methods. Show more

Keywords: Segmentation, tooth, watershed, oral scanner

DOI: 10.3233/BME-141153

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3303-3309, 2014

Authors: Birtane, Sibel | Korkmaz, Hayriye

Article Type: Research Article

Abstract: In this paper, 2-steps software using image processing and enhancement technologies is developed to obtain a scoliosis patient's spine pattern from 2D coronal X-Ray images without manual land marking. Then, a Rule-based Fuzzy classifier is implemented on those images to classify the spine patterns using the King-Moe classification approach.

Keywords: Image processing, scoliosis, king-moe type classification, fuzzy logic, computer aided classification, rule-based classification

DOI: 10.3233/BME-141154

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3311-3319, 2014

Authors: Liu, Xi | Liu, Lixiong

Article Type: Research Article

Abstract: We analyzed the principle of the traditional local binary fitting operation, Gaussian kernel function weighted summation (GKFWS), to develop a novel level set model in this paper. In this model, the traditional GKFWS operation is replaced with the median filter operation in the second procedure of local fitting of the energy domain. Furthermore, we incorporated the edge stopping function of GAC model into it to introduce the edge information for segmentation. Experiments on synthetic and real images demonstrate that this model has promising performance in terms of computational cost, robustness to noises and segmentation of images with intensity inhomogeneity.

Keywords: Active contour, median filter, image segmentation, level set, edge information

DOI: 10.3233/BME-141155

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3321-3332, 2014

Authors: Yin, Lim Khai | Rajeswari, Mandava

Article Type: Research Article

Abstract: To segment an image using the random walks algorithm; users are often required to initialize the approximate locations of the objects and background in the image. Due to its segmenting model that is mainly reflected by the relationship among the neighborhood pixels and its boundary conditions, random walks algorithm has made itself sensitive to the inputs of the seeds. Instead of considering the relationship between the neighborhood pixels solely, an attempt has been made to modify the weighting function that accounts for the intensity changes between the neighborhood nodes. Local affiliation within the defined neighborhood region of the two nodes …is taken into consideration by incorporating an extra penalty term into the weighting function. Besides that, to better segment images, particularly medical images with texture features, GLCM variance is incorporated into the weighting function through kernel density estimation (KDE). The probability density of each pixel belonging to the initialized seeds is estimated and integrated into the weighting function. To test the performance of the proposed weighting model, several medical images that mainly made up of 174-brain tumor images are experimented. These experiments establish that the proposed method produces better segmentation results than the original random walks. Show more

Keywords: Random walks, weighting function, gray-level co-occurrence, kernel density estimation

DOI: 10.3233/BME-141156

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3333-3341, 2014

Authors: Zhang, Ziqun | Zhang, Ran | Song, Zhijian

Article Type: Research Article

Abstract: Skull defect reconstruction is an important aspect of surgical repair. Historically, a skull defect prosthesis was created by the mirroring technique, surface fitting, or formed templates. These methods are not based on the anatomy of the individual patient's skull, and therefore, the prosthesis cannot precisely correct the defect. This study presented a new hybrid level set model, taking into account both the global optimization region information and the local accuracy edge information, while avoiding re-initialization during the evolution of the level set function. Based on the new method, a skull defect was reconstructed, and the skull prosthesis was produced by …rapid prototyping technology. This resulted in a skull defect prosthesis that well matched the skull defect with excellent individual adaptation. Show more

Keywords: Skull defect, image segmentation, level set method, rapid prototyping

DOI: 10.3233/BME-141157

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3343-3351, 2014

Authors: Xia, Yong | Liu, Yixuan | Wang, Kuanquan

Article Type: Research Article

Abstract: Having the ability to visualize the heart clearly and precisely would be beneficial for pathology research, presurgical planning, and clinical approaches. Multi-dimensional transfer functions were employed to improve the overall performance of images. To provide a satisfactory visualization quality on the shape and boundaries of the heart, a new hybrid transfer function combining structure size with gradient was designed to highlight the area of the heart. Initially, a histogram of gradient and histogram of size was computed and then classification was performed for providing the spatial information. Finally, several hybrid strategies were presented for the design of the transfer function, …including opacity and color. By experimental evaluation, the proposed hybrid transfer function visualized the cardiac outline and internal structure more clearly and easily. Show more

Keywords: visualization of heart, multi-dimensional transfer function, histogram of structure size, histogram of gradient

DOI: 10.3233/BME-141158

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3353-3359, 2014

Authors: Bao, Nan | Chen, Yu | Yue, Yong | Li, Hong | Cui, Zhiming | Zhuang, Jinfeng | Tian, Shi | Kang, Yan

Article Type: Research Article

Abstract: The rigid registration is a key step of Image Guided Surgery (IGS), and the point-pair method is the main way used for registration. However the configuration of fiducial points has a great influence on the registration accuracy at the target point. Now almost all the optimization method of fiducial points configuration relies on the empirical simulation-based Fitzpatrick's target registration error (TRE). In this paper, a phantom and some markers were designed and some experiments were conducted to measure and compare the affecting factors on the registration. By the markers repeated selections, the fiducial location error (FLE) has a small deviation …of maximum 0.4 mm, and the average of the Fitzpatrick's TRE (F-TRE) has almost 86% proportion to the average of the actual TRE (A-TRE), but the standard deviation (STD) just has 7% proportion. Also, the experiment result showed that six fiducial markers already had the 86% accuracy, and spreading the fiducial markers led to 30% reduction in mean of A-TRE and 40% reduction in STD of A-TRE comparing with the centralized. Overall, to find a strategy of optimization, reducing the TRE has the great meaning to support safer and more accurate minimally IGS procedures. Show more

Keywords: Image guided surgery, target registration error, registration, fiducial markers, number and distribution

DOI: 10.3233/BME-141159

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3361-3371, 2014

Authors: Ji, Bing | Yang, Qing | Genever, Paul G. | Fagan, Michael J.

Article Type: Research Article

Abstract: Multiple myeloma (MM)-induced bone disease is mortal for most MM patients. Bisphosphonates are first-line treatment for MM-induced bone disease, since it can inhibit osteoclast activity and the resultant bone resorption by suppressing the differentiation of osteoclast precursors into mature osteoclasts, promoting osteoclast apoptosis and disrupting osteoclast function. However, it is still unclear whether bisphosphonates have an anti-tumour effect. In our previous work, a computational model was built to simulate the pathology of MM-induced bone disease. This paper extends this proposed computational model to investigate the efficacy of bisphosphonates treatment and then clear the controversy of this therapy. The extended model …is validated through the good agreement between simulation results and experimental data. The simulation results suggest that bisphosphonates indeed have an anti-tumour effect. Show more

Keywords: Multiple myeloma, MM-induced bone disease, bisphosphonates, anti-tumour, computational model

DOI: 10.3233/BME-141160

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3373-3378, 2014

Authors: Wu, Yixiao | Yang, Ran | Jia, Sen | Li, Zhanjun | Zhou, Zhiyang | Lou, Ting

Article Type: Research Article

Abstract: This work was aimed at studying the method of computer-aided diagnosis of early knee OA (OA: osteoarthritis). Based on the technique of MRI (MRI: Magnetic Resonance Imaging) T2 Mapping, through computer image processing, feature extraction, calculation and analysis via constructing a classifier, an effective computer-aided diagnosis method for knee OA was created to assist doctors in their accurate, timely and convenient detection of potential risk of OA. In order to evaluate this method, a total of 1380 data from the MRI images of 46 samples of knee joints were collected. These data were then modeled through linear regression on an …offline general platform by the use of the ImageJ software, and a map of the physical parameter T2 was reconstructed. After the image processing, the T2 values of ten regions in the WORMS (WORMS: Whole-organ Magnetic Resonance Imaging Score) areas of the articular cartilage were extracted to be used as the eigenvalues in data mining. Then,a RBF (RBF: Radical Basis Function) network classifier was built to classify and identify the collected data. The classifier exhibited a final identification accuracy of 75%, indicating a good result of assisting diagnosis. Since the knee OA classifier constituted by a weights-directly-determined RBF neural network didn't require any iteration, our results demonstrated that the optimal weights, appropriate center and variance could be yielded through simple procedures. Furthermore, the accuracy for both the training samples and the testing samples from the normal group could reach 100%. Finally, the classifier was superior both in time efficiency and classification performance to the frequently used classifiers based on iterative learning. Thus it was suitable to be used as an aid to computer-aided diagnosis of early knee OA. Show more

Keywords: Knee OA, MR T2 mapping, RBF neural network, computer-aided diagnosis

DOI: 10.3233/BME-141161

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3379-3388, 2014

Authors: Zhu, Lei | Zheng, Ran | Jin, Hai | Zhang, Qin | Zhang, Wei

Article Type: Research Article

Abstract: Silicosis remains one of the most harmful occupational respiratory diseases. It threatens the workers exposed to dust environment. Chest radiograph is the main available image source for silicosis diagnosis according to the diagnostic criteria of pneumoconiosis (DCP). Automatic detection and recognition of silicosis in chest radiograph has great importance on aiding the process of silicosis diagnosis. This paper proposes a multi-scale opacity detection approach to detect all suspected opacities from the chest radiograph. A support vector machine (SVM) based computer-aided silicosis diagnosis is proposed to recognize silicosis opacity from a large amount of candidate regions, and gives processing result for …radiologist reference. Comprehensive experiments conducted on real world chest radiographs demonstrate that the proposed approach can reveal changes of silicosis pathology well, and it can be adopted as an effective tool for automatic silicosis diagnosis. Show more

Keywords: Silicosis, diagnostic criteria of pneumoconiosis, chest radiograph, support vector machine, silicosis pathology

DOI: 10.3233/BME-141162

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3389-3395, 2014

Authors: Li, Peng | Bi, Tingting | Huang, Jiuling | Li, Siben

Article Type: Research Article

Abstract: The frequent occurrence of breast cancer and its serious consequences have attracted worldwide attention in recent years. Problems such as low rate of accuracy and poor self-adaptability still exist in traditional diagnosis. In order to solve these problems, an AdaBoost-SVM classification algorithm, combined with the cluster boundary sampling preprocessing techniques (CBS-AdaBoost-SVM), is proposed in this paper for the early diagnosis of breast cancer. The algorithm uses machine learning method to diagnose the unknown image data. Moreover, not all of the characteristics play positive roles for classification. To address this issue the paper delete redundant features by using Rough set attribute …reduction algorithm based on the genetic algorithm (GA). The effectiveness of the proposed methods are examined on DDSM by calculating its accuracy, confusion matrix, and receiver operating characteristic curves, which give important clues to the physicians for early diagnosis of breast cancer. Show more

Keywords: Computer-aided diagnosis, image data mining, support vector machine, clustering sampling

DOI: 10.3233/BME-141163

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3397-3404, 2014

Authors: Song, In-Uk | Kim, Joong-Seok | Chung, Sung-Woo | Lee, Kwang-Soo | Oh, Jin-Kyoung | Chung, Yong-An

Article Type: Research Article

Abstract: Cognitive dysfunction is a common feature of Parkinson's disease (PD). Recent research has focused on the detection and management of subjective memory impairment (SMI) as the stage that precedes mild cognitive impairment (MCI). Nevertheless, few clinical studies have biomarkers of SMI in PD. Therefore, this study was designed to investigate differences in perfusion brain SPECT between PD with SMI (PD+SMI) and PD without SMI (PD-SMI) to identify a potential prodromal biomarker of progression to dementia in patients with PD. In this study, 30 PD patients with SMI and 24 PD patients without SMI have been recruited. All subjects underwent perfusion …brain SPECT and neuropsychological testing. Brain SPECT images were analyzed by using the SPM program and comparing between patients with PD+SMI and PD-SMI. The PD+SMI and PD-SMI groups did not differ in any neuropsychological tests, except for MMSE. Despite a significant difference in MMSE scores, all scores of both groups were in the normal range. Brain SPECT analysis of PD+SMI patients showed hypoperfusion in the frontal and inferior temporal regions, anterior cingulate and thalamus compared with PD-SMI patients. This pilot study investigated the role of decreased brain perfusion SPECT findings in PD+SMI patients compared with PD-SMI patients as a predictive biomarker of pre-dementia as the stage that precedes MCI in PD. Larger, prospective studies are warranted for further investigation of the pathophysiology of neuronal systems during cognitive decline. Show more

Keywords: Parkinson's disease, subjective memory impairment, perfusion SPECT

DOI: 10.3233/BME-141164

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3405-3410, 2014

Authors: Liu, Yubin | Li, Zhifang | Li, Hui | Yuan, Zhen

Article Type: Research Article

Abstract: In this study, the change of tumors' chemical composition in the temperature range of 20~70°C is quantified for photothermal tumor therapy by photoacoustic spectroscopy (PAS) with the wavelengths of 700~1000 nm. Based on the measured photoacoustic signals, two absorption peaks at the wavelengths of 750nm and 950nm are identified. It is also observed that high temperature (>55°C) is able to induce the physical and chemical degeneration of tumors. According to the in vitro tests, a new chemical species, met-hemoglobin, which is absent in normal blood, is generated at high temperature with enhanced near-infrared absorption.

Keywords: PAS, photothermal therapy, photoacoustic signals, hemoglobin

DOI: 10.3233/BME-141165

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3411-3418, 2014

Authors: Bianchi, Mariana | Adur, Javier | Ruff, Silvana Y. | Izaguirre, María F. | Carvalho, Hernandes F. | Cesar, Carlos L. | Casco, Víctor H.

Article Type: Research Article

Abstract: Murine induced colon cancer has been used to demonstrate that Second Harmonic Generation (SHG) microscopy images, combined with Two-Photon Excitation Fluorescence (TPEF) and specific quantization scoring methods allow distinguishing early alterations in colon mucosa. TPEF was used only to identified crypts and submucosa regions, whereas the image analysis was used to get quantitative data (Integrated Intensity and Aspect Ratio scoring) of different cancer stages. The submucosa amount of collagen fibers was significant and their orientation suffering proportional changes with the development of the pathological processes. Both after the fourth and eighth weeks after colon cancer induction, integrated intensity and aspect …ratio values have shown significant statistical differences compared with control samples. Thus, SHG microscopy has proved to be a useful quantitative tool to highlight early changes of submucosa and the progression of these through the cancer development. Show more

Keywords: Colon cancer, early detection, second harmonic generation, two-photon excitation fluorescence

DOI: 10.3233/BME-141166

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3419-3426, 2014

Authors: Li, Sujiao | Zhang, Zhengxiang | Wang, Jue

Article Type: Research Article

Abstract: Prevention of pressure sores remains a significant problem confronting spinal cord injury patients and the elderly with limited mobility. One vital aspect of this subject concerns the development of cushions to decrease pressure ulcers for seated patients, particularly those bound by wheelchairs. Here, we present a novel cushion system that employs interface pressure distribution between the cushion and the buttocks to design custom contoured foam cushion. An optimized normalization algorithm was proposed, with which interface pressure distribution was transformed into the carving depth of foam cushions according to the biomechanical characteristics of the foam. The shape and pressure-relief performance of …the custom contoured foam cushions was investigated. The outcomes showed that the contoured shape of personalized cushion matched the buttock contour very well. Moreover, the custom contoured cushion could alleviate pressure under buttocks and increase subjective comfort and stability significantly. Furthermore, the fabricating method not only decreased the unit production cost but also simplified the procedure for manufacturing. All in all, this prototype seat cushion would be an effective and economical way to prevent pressure ulcers. Show more

Keywords: Prototype, manufacture system, custom-contoured cushion (CCC), pressure sores, optimized normalization algorithm

DOI: 10.3233/BME-141167

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3427-3438, 2014

Authors: Huan, Cheng | Qu, Yuanming | Ren, Zongming

Article Type: Research Article

Abstract: The purpose of this study was to assess gender-related distinction in the performance of Cushing's disease (CD) regarding clinical features, radiological findings, neurological and endocrine status, surgical outcome, and quality of life in Han Chinese. A retrospective study was conducted on 87 patients treated by trans-sphenoidal surgery, between 2006 and 2011, at a single treatment center in Shandong Provincial Hospital, China. Features of CD were compared and quality of life was analyzed between genders. The female-to-male ratio was 2.78: 1. Results showed that men have a younger age of diagnosis (P<0.001), a larger adenoma diameter (P<0.001), and a higher invasion …rate (P=0.032) and apoplexy rate (P=0.04) than women. To be specific, compared with women, men are more prone to suffering from osteoporosis, hypokalemia, sexual dysfunction, and hypertension (P<0.05), have significantly higher preoperative and postoperative (six months after surgery) cortisol levels (P<0.001, P=0.003) and a higher recurrence rate (30.43% vs. 7.81%; P=0.028). No significant differences were seen in the CushingQoL scores between genders. Therefore, male patients with CD need more careful and long-term follow-up than female patients. Show more

Keywords: Cushing's disease, gender differences, transsphenoidal surgery, CushingQoL scores

DOI: 10.3233/BME-141168

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3439-3446, 2014

Authors: Zhang, Bowen | Chai, Hua | Yang, Ziyi | Liang, Yong | Chu, Gejin | Liu, Xiaoying

Article Type: Research Article

Abstract: Heart disease has become the number one killer of human health, and its diagnosis depends on many features, such as age, blood pressure, heart rate and other dozens of physiological indicators. Although there are so many risk factors, doctors usually diagnose the disease depending on their intuition and experience, which requires a lot of knowledge and experience for correct determination. To find the hidden medical information in the existing clinical data is a noticeable and powerful approach in the study of heart disease diagnosis. In this paper, sparse logistic regression method is introduced to detect the key risk factors using …L1/2 regularization on the real heart disease data. Experimental results show that the sparse logistic L1/2 regularization method achieves fewer but informative key features than Lasso, SCAD, MCP and Elastic net regularization approaches. Simultaneously, the proposed method can cut down the computational complexity, save cost and time to undergo medical tests and checkups, reduce the number of attributes needed to be taken from patients. Show more

Keywords: Heart disease, feature selection, sparse logistic regression, L1/2 regularization

DOI: 10.3233/BME-141169

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3447-3454, 2014

Authors: Zhang, Liang | Liu, Peiguo | Dong, Xiuzhen | Zhou, Dongming | Shi, Xuetao

Article Type: Research Article

Abstract: In this paper, a convenient and noninvasive scanning imaging method using microwave frequency band for abnormal subepidermal tissues detection is proposed in the aim to improve diagnosis and prognosis in clinical environments. This method is based on the reflective detection technology with coaxial probe that is used to measure the dielectric properties of tissues. An improved equivalent circuit and simulated annealing algorithm (SA) were used in this work to analyze the dielectric properties of tissues. Computational simulations incorporating a simplified model of subcutaneous hemorrhage described in this work were used to evaluate this method. The dielectric properties data of tissues …in the model of simulation is derived from the literature. The simulation results demonstrated the potential of this method to detect abnormal subepidermal tissues conveniently and expose them in the image accurately. Show more

Keywords: Coaxial probe, dielectric properties, scanning imaging, simulated annealing, subepidermal tissues

DOI: 10.3233/BME-141170

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3455-3462, 2014

Authors: He, Ying | Jiang, Pengjun | Han, Shanshan | Wang, Rong | Li, Yue | Teng, Yichao | Gao, Tianxin

Article Type: Research Article

Abstract: Near-infrared spectroscopy (NIRS) was used to investigate the cerebral oxygenation of Moyamoya and healthy subjects. Continuous recordings of NIRS signals for 20 min (20 min signals) were obtained from 17 healthy subjects (age: 37.4±11.3) and 17 Moyamoya subjects (age: 40.1±11.2). Spectral analysis based on wavelet transformation identified five frequency intervals (I, 0.0095 Hz to 0.02 Hz; II, 0.02 Hz to 0.06 Hz; III, 0.06 Hz to 0.15 Hz; IV, 0.15 Hz to 0.40 Hz; and V, 0.40 Hz to 2.00 Hz) in the 20 min signals and three frequency intervals (III, 0.06 Hz to 0.15 Hz; IV, 0.15 Hz to …0.40 Hz; and V, 0.40 Hz to 2.00 Hz) in the 3 min signals (the first 3 min signals were continuously extracted from the 20 min signals). Significant differences (p < 0.05) were found in frequency intervals III and V. The former exhibited the myogenic activity of smooth muscle inside the blood vessels in both 20 min and 3 min signal analyses; the latter showed hemodynamic oscillation caused by heart pumping. This finding agrees with the vascular pathological changes in Moyamoya disease. As a potential screening method for Moyamoya disease, the simple threshold method exhibited 73.5% accuracy. Show more

Keywords: Moyamoya disease, near-infrared spectroscopy, cerebral oxygenation, wavelet transformation, screening

DOI: 10.3233/BME-141171

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3463-3469, 2014

Authors: Yang, Jian | Fu, Tianyu | Ai, Danni | Xing, Huijun | Li, Qin | Wang, Yongtian

Article Type: Research Article

Abstract: Shoulder instability is a major threat to people's daily life. Many patients suffer from shoulder instability such as the loss of the glenoid and humeral head. In clinical practice, an accurate 3D structure estimation of damaged joints is necessary to diagnose and treat bone defects. This study quantifies osteoarticular defects through the modeling and visualization of osteoarticular structures. An improved algorithm to extract the 3D structure of the bones is proposed. The bone contour is then automatically extracted using prior shape and gray scale intensity distribution of joint CT images. Joint structures with mirror symmetry are matched using the Iterative …Closest Point registration algorithm. Osteoarticular defects can be quantified on the basis of the symmetric information of the bones. Experimental results demonstrate that the proposed method can effectively segment the joint structures from the CT image. In addition, the proposed mirror symmetrical method can effectively estimate osteoarticular defects. Show more

Keywords: Joint bone, segmentation, modeling, quantitative analysis

DOI: 10.3233/BME-141172

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3471-3478, 2014

Authors: Zhou, Zhengdong | Chen, Yuanhua | Yu, Zili | Wang, Dongdong | Zhao, Chunsheng | Xu, Jun | Song, Wei | Li, Bing | Shen, Junshu | Zhu, Xixu

Article Type: Research Article

Abstract: Intensity-Modulated Radiation Therapy (IMRT) mathematically forms a large-scale optimization problem. The development of an IMRT plan is computationally expensive resulting in time-consuming, inefficient, and difficult to develop high-quality IMRT plans. By combining prior knowledge with proposed novel measures derived from both Overlap Volume Histogram (OVH) descriptors and Dose Volume Histograms (DVHs), a novel quality control method for IMRT planning is proposed to assure the high quality of IMRT plan. Clinical approved nasopharyngeal IMRT plans were employed for the experiments, where the reference plan is firstly retrieved from IMRT plan database for each query case by using measures derived from both …OVH descriptors and DVHs. Then the DVHs of the reference plan are served as additional goals for the IMRT plan re-optimization. The experimental results show that the proposed method can effectively pick out those IMRT plans, whose quality could be improved substantially (i.e. the doses of their Clinical Targets Volume (CTV) could be effectively increased) and the dose of their Organs at Risk (OARs) could be reduced after the IMRT plan has being re-optimized. In conclusion, the proposed methods can effectively guarantee the high quality of the IMRT planning. Show more

Keywords: Intensity-modulated radiation therapy (IMRT), quality control, overlap volume histogram (OVH), prior knowledge

DOI: 10.3233/BME-141173

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3479-3485, 2014

Authors: Wang, Chunxi | Cai, Xiangjun | Liang, Faqi | Chu, Futao | Chen, Gang | Duan, Zhiquan

Article Type: Research Article

Abstract: The celiomesenteric trunk is a rare anomaly characterized by a common origin of the celiac axis and superior mesenteric artery from the aorta, which accounts for less than 1% of all celiac artery anomalies, so the aneurysm occurred in such trunk is even rarer. There have been few reports on how to diagnose and deal with such malformed celiomesenteric trunk aneurysms till now. This paper tries to summarize the experience of how to expose and excise such kind of aneurysm according to the seven cases' data. The clinic data were collected retrospectively. There were seven cases with celiomesenteric trunk aneurysm …from February 2000 to February 2013, including 5 males and 2 females aged 35~62. The operations were done including aneurysm resection and vascular reconstruction under general anesthesia. The operated patients were followed-up at the sixth month and each year post operation. The vascular stomas were detected or examined by Color Doppler Sonography, spiral Computed Tomography angiography (SCTA). The seven operated patients were cured and discharged from hospital, and they were followed up for 3~10 years (mean time 5 years), with four patients being followed up longer than 5 years. No sign of intestinal ischemia or hepatic ischemia or splenic ischemia was found, and no image of anastomosis stricture or stenosis was found during the follow-up. Five patients are alive now while two patients were dead, with one dying of large area myocardial infarction unexpectedly at 6 years post operation and the other dying of cerebral infarction abruptly at 4 years post operation. It is an effective and safe method to treat the celiomesenteric trunk aneurysm by using by-pass operation with artificial blood vessels, originating from inferior kidney aorta to visceral arteries including hepatic artery, splenic artery and superior mesenteric artery. Its short-term and middle-term effects are relatively better. Show more

Keywords: Celiomesenteric trunk, superior mesenteric artery, celiac trunk, aneurysm, operation

DOI: 10.3233/BME-141174

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3487-3492, 2014

Authors: Eguiluz-Perez, Gonzalo | Garcia-Zapirain, Begonya

Article Type: Research Article

Abstract: People with Multiple Sclerosis (MS) need regular physical activities along with medical treatment despite their ability or disability level. However, poorly performed exercises could aggravate muscle imbalances and worsen their health. The goal of our work is to create a comprehensive system, encompassing a face-to-face sessions performed by MS patients one day a week at the medical center with exercises at home the rest of the week through a web platform in combination with a tracking tool to analyze the position of patients during exercise and correct them in real-time. The whole system is currently testing during six months with …ten participants, five persons with MS and 5 professionals related with MS. Two tests, the Functional Independence Measure and the Berg Balance Scale will be act as a barometer for measuring the degree of independence obtained by the people with MS and also the validity of the whole system as a rehabilitation tool. Preliminary results about the usability of the system using SUS scale, 72 and 76 points over 100 (patients and professionals respectively), demonstrate that our system is usable for both patients and professionals. Show more

Keywords: Multiple Sclerosis, telerehabilitation, web application, verticality analysis

DOI: 10.3233/BME-141175

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3493-3502, 2014

Authors: Tran, Thang Viet | Chung, Wan-Young

Article Type: Research Article

Abstract: This paper proposes the design and implementation of a low-voltage and low-power body sensor node based on the IEEE 802.15.4 standard to collect electrocardiography (ECG) and photoplethysmography (PPG) signals. To achieve compact size, low supply voltage, and low power consumption, the proposed platform is integrated into a ZigBee mote, which contains a DC-DC booster, a PPG sensor interface module, and an ECG front-end circuit that has ultra-low current consumption. The input voltage of the proposed node is very low and has a wide range, from 0.65 V to 3.3 V. An RF energy harvester is also designed to charge the …battery during the working mode or standby mode of the node. The power consumption of the proposed node reaches 14 mW in working mode to prolong the battery lifetime. The software is supported by the nesC language under the TinyOS environment, which enables the proposed node to be easily configured to function as an individual health monitoring node or a node in a wireless body sensor network (BSN). The proposed node is used to set up a wireless BSN that can simultaneously collect ECG and PPG signals and monitor the results on the personal computer. Show more

Keywords: Body sensor network, electrocardiography, photoplethysmography, low-power node, radio frequency energy harvester

DOI: 10.3233/BME-141176

Citation: Bio-Medical Materials and Engineering, vol. 24, no. 6, pp. 3503-3510, 2014