Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Chang, Chih Hao; | Tsao, Ching Ting; ; | Chang, Ken Yu | Chen, Szu Hsien | Han, Jin Lin | Hsieh, Kuo Huang; ;
Affiliations: Department of Orthopedics, National Taiwan University Hospital and National Taiwan University College of Medicine, Taipei, Taiwan | Institute of Polymer Science and Engineering, College of Engineering, National Taiwan University, Taipei, Taiwan | Epithelial Biology Laboratory/Transgenic Mice Core-Laboratory, Department of Anatomy, Chang Gung University, Taoyuan, Taiwan | Department of Chemical Engineering, College of Engineering, National Taiwan University, Taipei, Taiwan | Department of Chemical and Materials Engineering, College of Engineering, National Ilan University, Ilan, Taiwan
Note: [] These authors contributed equally to this work.
Note: [] Corresponding author: Kuo Huang Hsieh, Institute of Polymer Science and Engineering and Department of Chemical Engineering, College of Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Road, Taipei City 10617, Taiwan. Tel.: +886 2 3366 3043; Fax: +886 2 3366 3044; E-mail: [email protected].
Abstract: Segmented polyurethane (SPU) materials based on different soft-segment component (PPG, PTMO and PBA) and various length of soft-segment (molecular weight of PBA: 500, 700 and 1000) were synthesized in this research. The soft-segment components were synthesized from polyether-polyols (PPG and PTMO) or from polyester-polyol (PBA). The physical properties and structure characterization of the synthesized SPUs were fully investigated using differential scanning calorimetry (DSC) analysis, and stress–strain measurements. Blood compatibility was evaluated with the platelet adhesion ratio (PAR) and the morphological observation for adhering platelets. Our results showed that the physical properties and blood compatibility of SPUs were closely related to its composition, which was controlled by (1) the types of the soft-segment component employed and (2) the length of soft segments. Polyether-polyol-based SPUs exhibited greater phase separations, poorer tensile strengths, and better blood compatibility, compared with polyester-polyol-based SPUs. SPUs with shorter soft-segment component exhibited greater phase mixing, higher tensile strength, but lower blood compatibility of SPUs, as compared with its counterparts with longer soft-segment component.
Keywords: Segmented polyurethane (SPU), polyol, blood compatibility, phase separation
DOI: 10.3233/BME-2012-0726
Journal: Bio-Medical Materials and Engineering, vol. 22, no. 6, pp. 373-382, 2012
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]