Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: 2nd International Conference on New Biomedical Materials, 5–8 April 2003, Cardiff, Wales, UK
Article type: Research Article
Authors: Leegsma‐Vogt, Gea | Rhemrev‐Boom, Maria M. | Tiessen, Renger G. | Venema, Kor | Korf, Jakob
Affiliations: Department of Psychiatry, section Biological Psychiatry, University of Groningen, PO Box 30.001, 9700 RB Groningen, The Netherlands
Note: [] Corresponding author: Jakob Korf, Department of Psychiatry, Section Biological Psychiatry P6.11, University of Groningen, PO Box 30.001, 9700 RB Groningen, The Netherlands. Tel.: +31 50 3612100; Fax: +31 50 3611699; E‐mail: [email protected].
Abstract: Glucose or lactate biosensors are very useful for monitoring metabolism. Continuous monitoring of glucose is for example very important in diabetic patients. The measurement of lactate, a marker for oxygen deficiency, is used in the intensive care unit to monitor the patients' condition. In our laboratory we have developed two types of on‐line biosensors to measure in vivo glucose and lactate: a sandwich‐type biosensor and, very recently, a miniaturized flow‐through biosensor. These biosensors are not placed in the body itself, but are connected to implanted microdialysis or ultrafiltration probes. Both types of biosensors are based on the oxidation of substrate using glucose oxidase or lactate oxidase and electrochemical detection. In the sandwich‐type sensor, the enzymes are physically immobilized between two cellulose nitrate filters, and operate with ferrocene as a mediator. In the miniaturized biosensor, with an internal volume of 10–20 nanolitres, the enzymes are immobilized on the electrode via in situ encapsulation in poly(1,3‐phenylenediamine). In this review we shall explain the working of these biosensors, and describe their application in clinical monitoring and experimental research.
Keywords: Biosensor, glucose, lactate, monitoring
Journal: Bio-Medical Materials and Engineering, vol. 14, no. 4, pp. 455-464, 2004
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]