Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Sagsoz, Omera; | Polat Sagsoz, Nurdanb
Affiliations: [a] Department of Restorative Treatment, Faculty of Dentistry, Ataturk University, Erzurum, Turkey | [b] Department of Prosthodontics, Faculty of Dentistry, Ataturk University, Erzurum, Turkey
Correspondence: [*] Corresponding author: Omer Sagsoz, Department of Restorative Treatment, Faculty of Dentistry, Ataturk University, 25240, Erzurum, Turkey. Tel.: +90 5534290938; E-mail: [email protected]
Abstract: BACKGROUND:The chemical properties of the oral environment have an appreciable influence on the in vivo degradation of CAD/CAM materials. OBJECTIVE:The aim of the present study was to investigate the effect of organic acids, heptane and ethanol (the food-simulating liquids) on CAD/CAM restorative materials. METHODS:Four CAD/CAM materials were selected: (1) 3M ESPE LAVA Ultimate, (2) VITA Enamic, (3) IPS e.max CAD, (4) VITA Suprinity. Seven different samples were fabricated in 15 × 4 × 1.2 mm dimensions from each material (n = 7, N = 140). The materials were conditioned for 7 days at 37 °C as follows: artificial saliva, 75% ethanol, heptane, 0.02 N citric acid, 0.02 N lactic acid in aqueous solution and were tested to obtain flexural strength, surface micro-hardness and wear characteristics. After conditioning, the flexural strength values were assessed using a universal testing machine (1 mm/min crosshead speed) and the fractured samples were used for determination of Vickers hardness values using a digital micro-hardness tester (100 g/10 s) and determination of wear using a chewing simulator. Two factor analysis of variance with interaction model and Tukey’s post hoc test were used for statistical analysis. RESULTS:The highest mechanical property values were found for IPS e.max and VITA Suprinity and the lowest values were found for LAVA Ultimate. Organic acids negatively affected the mechanical properties of e.max CAD and Suprinity. Ethanol and heptane were more effective on LAVA Ultimate and Enamic. There were significant differences among groups (p < 0.05). CONCLUSION:The mechanical properties of CAD/CAM restorative materials are influenced by food-simulating liquids.
Keywords: CAD/CAM, food-simulating liquids, mechanical properties
DOI: 10.3233/BME-191063
Journal: Bio-Medical Materials and Engineering, vol. 30, no. 4, pp. 419-426, 2019
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]