You are viewing a javascript disabled version of the site. Please enable Javascript for this site to function properly.
Go to headerGo to navigationGo to searchGo to contentsGo to footer
In content section. Select this link to jump to navigation

Optimization of the imaging quality of 64-slice CT acquisition protocol using Taguchi analysis: A phantom study

Issue title: Frontiers in Biomedical Engineering and Biotechnology – Proceedings of the 4th International Conference on Biomedical Engineering and Biotechnology, 18–21 August 2015, Shanghai, China

Guest editors: Feng Liu, Dong-Hoon Lee, Ricardo Lagoa and Sandeep Kumar

Article type: Research Article

Authors: Pan, Lung Faa; b | Erdene, Erdenetsetsegb | Chen, Chun Chic | Pan, Lung Kwangb; *

Affiliations: [a] Department of Cardiology, Taichung Armed Forces General Hospital, Taichung, 406, Taiwan | [b] Graduate Institute of Radiological Science, Central Taiwan University of Science and Technology, Takun, Taichung 406, Taiwan | [c] Department of Nuclear Medicine, Chung Shan Medical University Hospital, Taichung, 402, Taiwan

Correspondence: [*] Address for correspondence: Lung Kwang Pan, Graduate Institute of Radiological Science, Central Taiwan University of Science and Technology, Takun, Taichung 406, Taiwan. Tel.: 886-920810713; Fax: 886-4-22396762; E-mail: [email protected].

Keywords: 64-slice CT, reconstructed imaging, optimization, ANOVA, line phantom

DOI: 10.3233/BME-151464

Journal: Bio-Medical Materials and Engineering, vol. 26, no. s1, pp. S1651-S1658, 2015

Published: 2015
Get PDF open access

In this study, the phantom imaging quality of 64-slice CT acquisition protocol was quantitatively evaluated using Taguchi. The phantom acrylic line group was designed and assembled with multiple layers of solid water plate in order to imitate the adult abdomen, and scanned with Philips brilliance CT in order to simulate a clinical examination. According to the Taguchi L8(27) orthogonal array, four major factors of the acquisition protocol were optimized, including (A) CT slice thickness, (B) the image reconstruction filter type, (C) the spiral CT pitch, and (D) the matrix size. The reconstructed line group phantom image was counted by four radiologists for three discrete rounds in order to obtain the averages and standard deviations of the line counts and the corresponding signal to noise ratios (S/N). The quantified S/N values were analyzed and the optimal combination of the four factor settings was determined to be comprised of (A) a 1-mm thickness, (B) a sharp filter type, (C) a 1.172 spiral CT pitch, and (D) a 1024×1024 matrix size. The dominant factors included the (A) filter type and the cross interaction between the filter type and CT slice thickness (A×B). The minor factors were determined to be (C) the spiral CT pitch and (D) the matrix size since neither was capable of yielding a 95% confidence level in the ANOVA test.

Show more