Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Okada, Yukimasa; | Furumatsu, Takayuki | Miyazawa, Shinichi | Fujii, Masataka | Takahashi, Hiroyuki | Kimura, Hiroomi | Ozaki, Toshifumi | Abe, Nobuhiro
Affiliations: Department of Orthopaedic Surgery, Okayama University Graduate School, Okayama, Japan | Nakashima Medical Co., Ltd, Okayama, Japan | Department of Orthopaedic Surgery and Sport Medicine, Kawasaki Hospital, Kawasaki Medical School, Okayama, Japan
Note: [] Address for correspondence: Yukimasa Okada, Department of Orthopaedic Surgery, Science of Functional Recovery and Reconstruction, Okayama University Graduate School of Medicine, Dentistry, and Pharmaceutical Sciences, 2-5-1, Shikata-cho, Kita-ku, Okayama 700-8558, Japan. Tel.: +81 86 235 7273; Fax: +81 86 223 9727; E-mail: [email protected]
Abstract: BACKGROUND: Poly-ether-ether-ketone (PEEK) has biomechanical and chemical properties that are excellent for biomedical applications; however, PEEK adhesion to bone or chondral tissue proceeds slowly due to poor hydrophilicity and other surface characteristics. OBJECTIVE: We investigated the structural change, hydrophilicity, and cytocompatibility of a PEEK surface after 172-nm xenon excimer UV-irradiation. METHODS: The surface characteristics before and after irradiation were evaluated by contact angle and ATR-FTIR measurements. Mouse osteoblast-like cells (MC3T3-E1) were cultured on PEEK plates and collected after 6, 12 and 24 h for cell adhesion analysis by crystal violet staining (CVS) and scanning electron microscopy (SEM). RESULTS: UV-irradiation improved PEEK surface hydrophilicity, as indicated by a significant drop in water contact angle (p<0.05). Irradiated PEEK showed additional peaks around 3370 cm−1 and 1720 cm−1, highlighting the generation of hydroxyl and carbonyl groups. CVS and SEM revealed improved adhesion to the PEEK surface after UV-irradiation. CONCLUSION: Our results suggest that 172-nm UV-irradiated PEEK may be used in biomedical applications that require good cell adhesion.
Keywords: Poly(ether-ether-ketone), UV-irradiation, cytocompatibility
DOI: 10.3233/BME-151267
Journal: Bio-Medical Materials and Engineering, vol. 25, no. 2, pp. 169-175, 2015
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]