Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Bayraktaroglu, Esra | Gulsoy, H. Ozkan; | Gulsoy, Nagihan | Er, Ozay | Kilic, Hasan
Affiliations: Institute for Graduate Studies in Pure and Applied Sciences, Marmara University, Göztepe-Istanbul, Turkey | Metallurgy and Material Engineering, Technology Faculty, Marmara University, Göztepe-Istanbul, Turkey | Department of Biology, Faculty of Science and Letter, Marmara University, Göztepe-Istanbul, Turkey | Chemistry Department, Marmara University, Göztepe-Istanbul, Turkey
Note: [] Address for correspondence: H. Ozkan Gulsoy, Metallurgy and Material Engineering, Technology Faculty, Marmara University, 34722, Göztepe-Istanbul, Turkey. Tel.: +90 216 3365770 322; Fax: +90 216 3378987; E-mail: ogulsoy@marmara. edu.tr.
Abstract: The research was investigated the effect of boron additions on sintering characteristics, mechanical, corrosion properties and biocompatibility of injection molded austenitic grade 316L stainless steel. Addition of boron is promoted to get high density of sintered 316L stainless steels. The amount of boron plays a role in determining the sintered microstructure and all properties. In this study, 316L stainless steel powders have been used with the elemental NiB powders. A feedstock containing 62.5 wt% powders loading was molded at different injection molded temperature. The binders were completely removed from molded components by solvent and thermal debinding at different temperature. The debinded samples were sintered at different temperature for 60 min. Mechanical property, microstructural characterization and electrochemical property of the sintered samples were performed using tensile testing, hardness, optical, scanning electron microscopy and electrochemical corrosion experiments. Sintered samples were immersed in a simulated body fluid (SBF) with elemental concentrations that were comparable to those of human blood plasma for a total period of 15 days. Both materials were implanted in fibroblast culture for biocompatibility evaluations were carried out. Results of study showed that sintered 316L and 316L with NiB addition samples exhibited high mechanical and corrosion properties in a physiological environment. Especially, 316L with NiB addition can be used in some bioapplications.
Keywords: Powder injection molding, sintering, biomaterials, in vitro, bioactivity simulated body fluid
DOI: 10.3233/BME-2012-0723
Journal: Bio-Medical Materials and Engineering, vol. 22, no. 6, pp. 333-349, 2012
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]