Microfilters for biomedicine obtained by swift ion processing

Article type: Research Article

Authors: Torrisi, L.^;

Affiliations: Dipartimento di Fisica di Messina, Università di Messina, Italy, and INFN-Laboratorio Nazionale del Sud di Catania, Italy

Note: [] Address for correspondence: Ctr. Papardo-Sperone 31, 98166 S. Agata, Messina, Italy. E-mail: [email protected].

Abstract: Swift ions with 50 MeV energy are used to irradiate bio-polymeric films. Lithium, carbon and oxygen beams, with fluencies ranging between 108 and 1013 ions/cm2, are swept on large surfaces of hydrogenated and fluorated polymers. The electronic stopping power of the ion induces high rates of ionization, excitation and radical formation along the ion path with production of chain-scission and cross-linking processes which can be investigated by the molecular emission from the irradiated polymer. The radiation damage increases the chemical solubility of the material around the ion track up to distances of the order of 100 nm. A suitable chemical etching removes the damaged material leaving micrometric holes in the polymeric film. This process gives rise to micro-perforated films which can be used as microfilters, with sub-micrometric pore dimension, high selectivity and controllable porosity. Their use is very interesting for special applications in ultra- and micro filtration of biological liquids.

DOI: 10.3233/BME-1997-7503

Journal: Bio-Medical Materials and Engineering, vol. 7, no. 5, pp. 303-313, 1997