Affiliations: [a] School of Mechanical Engineering, Dalian University of Technology, Dalian, China | [b] Department of Orthopedics, Dalian No.2 People’s Hospital, Dalian, China
Correspondence:
[*]
Corresponding author: Wei Jiang, School of Mechanical Engineering, Dalian University of Technology, Dalian, China. E-mail: [email protected]
Abstract: BACKGROUND:The finite element method (FEM) is an efficient and powerful tool for studying human spine biomechanics. OBJECTIVE:In this study, a detailed asymmetric three-dimensional (3D) finite element (FE) model of the upper cervical spine was developed from the computed tomography (CT) scan data to analyze the effect of ligaments and facet joints on the stability of the upper cervical spine. METHODS:A 3D FE model was validated against data obtained from previously published works, which were performed in vitro and FE analysis of vertebrae under three types of loads, i.e. flexion/extension, axial rotation, and lateral bending. RESULTS:The results show that the range of motion of segment C1–C2 is more flexible than that of segment C2–C3. Moreover, the results from the FE model were used to compute stresses on the ligaments and facet joints of the upper cervical spine during physiological moments. CONCLUSION:The anterior longitudinal ligaments (ALL) and interspinous ligaments (ISL) are found to be the most active ligaments, and the maximum stress distribution is appear on the vertebra C3 superior facet surface under both extension and flexion moments.
