Affiliations: [a] School of Mechanical Engineering, University of Birmingham, Birmingham, UK | [b] School of Metallurgy and Materials, University of Birmingham, Birmingham, UK
Correspondence:
[*]
Address for correspondence: Dr Aziza Mahomed, School of Mechanical Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK. Tel.: +44 121 414 7229; Fax: +44 121 414 3958; E-mail: [email protected].
Abstract: The viscoelastic properties of cylinders (diameter 5 mm, height 2.2 ± 0.2 mm) of Nagor silicone elastomer of medium hardness, were investigated before and after the specimens had undergone accelerated aging in saline solution at 70°C for 38, 76 and 114 days (to simulate aging at 37°C, for 1, 2 and 3 years, respectively). All sets of specimens were immersed in physiological saline solution at 37°C during testing and the properties were measured using dynamic mechanical analysis (DMA). A sinusoidal cyclic compression of 40 N ± 5 N was applied over a frequency range, f, of 0.02–25 Hz. Values of the storage, E′, and loss, E″, moduli were found to depend on f; the dependence of E′ or E″ on the logarithm (base 10) of f was represented by a second-order polynomial. After accelerated aging, the E′ and E″ values did not increase significantly (p<0.05). Furthermore, scanning electron microscopy (SEM) showed that accelerated aging did not affect the surface morphology of silicone. Attenuated total reflectance Fourier transform infra-red spectroscopy (ATR-FTIR) showed that accelerated aging had a negligible effect on the surface chemical structures of the material. Differential scanning calorimetry (DSC) showed no changes to the bulk properties of silicone, following accelerated aging.
