Response of Arthrospira platensis to different temperatures regarding growth and biochemical composition

Issue title: Selected articles from the 3rd Joint Meeting of The European Society for Clinical Hemorheology and Microcirculation (ESCHM) , The International Society for Clinical Hemorheology (ISCH) and The International Society of Biorheology (ISB), Regensburg, Germany, 28 – 30 September 2023

Guest editors: L. Prantl, A. Krueger-Genge and F. Jung

Article type: Research Article

Authors: Nghinaunye, T.^a | Waldeck, P.^b | Jung, C.G.H.^c | Küpper, J.-H.^{a; c} | Jung, F.^a | Braune, S.^{a; *}

Affiliations: [a] Institute of Biotechnology, Molecular Cell Biology, Brandenburg University of Technology, Cottbus-Senftenberg, , Cottbus, Germany | [b] Phototrophic Biotechnology, Institute of Biotechnology, Brandenburg University of Technology, Cottbus-Senftenberg, Cottbus, Germany | [c] Carbon Biotech, Social Enterprise Stiftungs AG, Senftenberg, Germany

Correspondence: [*] Corresponding author: Dr. Steffen Braune, Institute of Biotechnology, Molecular Cell Biology, Brandenburg University of Technology, Cottbus-Senftenberg, Germany. E-mail: [email protected].

Abstract: The growth of cyanobacteria can vary considerably depending on the ambient temperature. Since the optimal growth temperature for Arthrospira platensis (strain SAG21.99) is not yet known, this was investigated in the present study. The study revealed that a process temperature of 30 °C seems to be optimal for the Arthrospira strain SAG21.99 cultivation in terms of a maximum biomass productivity. This was also true for the phycocyanin content which was at 30 °C significantly higher than at 20 or 40 °C.

Keywords: Arthrospira platensis, growth, temperature, bioreactor

DOI: 10.3233/CH-238104

Journal: Clinical Hemorheology and Microcirculation, vol. 86, no. 1-2, pp. 205-211, 2024