Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: A Selection of Papers from the International Symposium on Advanced Bio-Materials and Engineering '93 (ISABE '93)
Article type: Research Article
Authors: Nordström, E. G.; | Herø, H. | Jørgensen, R. B.
Affiliations: Scandinavian Institute of Dental Materials, Postboks 70, N-1344 Haslum, Norway
Note: [] Permanent address: Department of Chemical Engineering, Abo Akademi University, SF-20500 Abo, Finland.
Abstract: Bend specimens of the inorganic synthetic materials hydroxyapatite (HA) and a composite of hydroxyapatite/muscovite mica have been prepared and tested mechanically. Sintering followed by hot isostatic pressing (HIP) without encapsulation gave an increased strength for HA alone, but no significant increase in strength compared with sintering alone for HA/mica composites. The bend strength of the HA/mica composite was inferior to that of HA alone, the reason being inadequate bonding between HA and mica. HIP in glass capsules and an increased cold compaction pressure tended to improve the bend strength of the composite. Corrosion in tris for 7d did not affect the bend strength of the investigated materials significantly.
DOI: 10.3233/BME-1994-4406
Journal: Bio-Medical Materials and Engineering, vol. 4, no. 4, pp. 309-315, 1994
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]