Comprehensive magnetic properties measurement of the laminated silicon steel by 3-D magnetic tester

Issue title: 14th International Workshop on 1&2 Dimensional Magnetic Measurement and Testing (2016)

Guest editors: Zhiguang Cheng, Jianguo Zhu, Yongjian Li and Johannes Sievert

Article type: Research Article

Authors: Li, Yongjian^{a; *} | Wang, Lixiang^a | Yang, Qingxin^{a; b} | Zhu, Jianguo^c | Zhang, Changgeng^a

Affiliations: [a] State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin 300130, China | [b] Tianjin Key Laboratory of AEEET, Tianjin Polytechnic University, Tianjin 300387, China | [c] School of EMMS, University of Technology, Sydney, Australia

Correspondence: [*] Corresponding author: Yongjian Li, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin 300130, China. E-mail: [email protected].

Abstract: In this paper, a novel three-dimensional (3-D) magnetic tester with symmetrical orthogonal excitation structure and cubic field-metric sensing structure is designed and analyzed. Automatic measurement system, which includes feedback control method, harmonics compensation, and automatic data processing is developed for the 3-D magnetic tester. In order to improve the measurement precision, cross effects of the magnetic fields in three principal directions are concerned, and error mitigation methods which fit for different excitation models are proposed. Magnetic properties of typical grain-oriented (GO) and non-grain-oriented (NGO) laminated silicon steel specimens under alternating and rotating excitations are measured and analyzed by using the designed 3-D magnetic tester.

Keywords: Laminated silicon steel, 3-D magnetic tester, automatic measurement system, dynamic magnetic properties, rotating excitation

DOI: 10.3233/JAE-172272

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 55, no. S1, pp. 177-191, 2017