Engineering-oriented investigation of magnetic property modeling and application

Issue title: 14th International Workshop on 1&2 Dimensional Magnetic Measurement and Testing (2016)

Guest editors: Zhiguang Cheng, Jianguo Zhu, Yongjian Li and Johannes Sievert

Article type: Research Article

Authors: Cheng, Zhiguang^{a; *} | Forghani, Behzad^b | Wang, Xuegang^a | Liu, Lanrong^a | Liu, Tao^a | Fan, Yana^a | Zhang, Junjie^a | Zhao, Xiaojun^c | Liu, Yang^d

Affiliations: [a] Institute of Power Transmission and Transformation Technology, Baoding, Hebei, China | [b] Infolytica Corporation, Place du Parc, Montreal, QC, Canada | [c] Department of Electrical Engineering, North China Electric Power University, Baoding, Hebei, China | [d] State Key Lab. of Advanced Transmission Technology, Global Energy Interconnection Research Institute, Beijing, China

Correspondence: [*] Corresponding author: Zhiguang Cheng, Institute of Power Transmission and Transformation Technology, Baobian Electric Co., Ltd, Baoding 071056, Hebei, China. Tel.: +86 312 3308363; E-mail: [email protected].

Abstract: This paper discusses engineering-oriented magnetic material property modeling, fully taking into account the requirements posed by industrial applications, involving the magnetic properties measured under both standard and extreme conditions, the combination of material modeling and numerical analysis, and the validation of modeling and simulation. It presents some application notes on typical magnetic measurement and modeling, concerning the Epstein combination and data weighted processing method, the additional iron loss caused by 3-D excitation, the examination of magnetic flux inside laminated stacks, and the effect of both B-H curves and solvers on loss analysis, based on the authors’ recent research. In addition, future research projects on the determination and application of the magnetic material properties, under practical working conditions, are proposed.

Keywords: Magnetic material and component, industrial magnetic measurement, working magnetic property, modeling and simulation, validation and application

DOI: 10.3233/JAE-172269

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 55, no. S1, pp. 147-158, 2017