Proposal of linear oscillatory actuator using DC motor for active control engine mount

Issue title: Proceedings from the 17th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2015)

Guest editors: Fumio Kojima, Futoshi Kobayashi and Hiroyuki Nakamoto

Article type: Research Article

Authors: Kobayashi, Masashi^* | Hirata, Katsuhiro | Kitayama, Fumiya

Affiliations: Department of Adaptive Machine Systems, Graduate School of Engineering, Osaka University, Osaka, Japan

Correspondence: [*] Corresponding author: Masashi Kobayashi, Department of Adaptive Machine Systems, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan. Tel./Fax: +81 6 6879 7553; E-mail:[email protected]

Abstract: We propose a new linear oscillatory actuator which converts rotational motion into linear motion using brushed DC motors for Active Control Engine Mounts (ACMs). It was assumed that ACMs using this actuator would be low cost because brushed DC motors can be easily mass produced and the control method has already been established. Finally, we verified the performance of this actuator through FEM analysis, dynamic simulation, and experiments on a prototype.

Keywords: Active control engine mount, linear oscillatory actuator, brushed DC motor, finite element method

DOI: 10.3233/JAE-162218

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 3-4, pp. 1647-1653, 2016