Affiliations: [a] Key Laboratory of Geophysical Exploration Equipment, Ministry Ministry of Education, Jilin University, Changchun, China | [b] College of Instrumentation and Electrical Engineering, Jilin University, Changchun, China
Correspondence:
[*]
Corresponding author: Haigen Zhou, Key Laboratory of Geophysical Exploration Equipment, Ministry of Education, Jilin University, Changchun, China and College of Instrumentation and Electrical Engineering, Jilin University, Changchun, China. E-mail: [email protected]
Abstract: In the ground-airborne frequency domain electromagnetic detection, the receving system converts the magnetic field signal into an electrical signal representing the magnetic field signal. In order to accurately obtain the relationship between the magnetic field signal and the electrical signal, it is necessary to avoid the influence of environment and other factors on the system accuracy through on-site calibration. This requires high calibration accuracy, simple operation, portable equipment and strong adaptability to the environment. However, the existing calibration methods put forward higher requirements for instruments and environment. For example, the calibration of uniform magnetic field generated by Helmholtz coil needs to shield external magnetic field interference. In this paper, an overall calibration method of measurement system based on magnetic source excitation is proposed to meet the requirements of electromagnetic field accurate measurement in ground-airborne frequency domain. Firstly, based on the electromagnetic measurement method in ground-airborne frequency domain, the overall calibration method and principle of the detection system are introduced. Then, based on the computable standard magnetic field generated by the magnetic source transmitting coil, determine the measured voltage obtained by the receiving system, get the calibration coefficient of the receiving system. At last,the source of standard uncertainty related to calibration is analyzed, and the uncertainty is evaluated. In addition, the method is verified by comparing the calibration results with those obtained by Braunbeck coil calibration.
Keywords: Ground-air frequency domain electromagnetic detection, air-core sensor (ACS), magnetic source excitation, calibration
