Affiliations: [a] Department of Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University, Sendai-shi, Miyagi-ken, Japan
Correspondence:
[*]
Corresponding author: Yijun Guo, Department of Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University, Aramaki-Aza-Aoba 6-6-01-2, Aoba-ku, Sendai-shi, Miyagi-ken, 980-8579, Japan. E-mail: [email protected]
Abstract: This study explores the applicability of microwave nondestructive testing to detect a metal pipe’s inner crack. Three-dimensional finite element simulations were conducted to study the inspectability of cracks using microwaves in different modes and the dependency of the reflection characteristics of microwaves on crack size. The simulation results showed that microwaves in the TM01 and TE01 modes can detect circumferential and axial cracks, respectively. The positive relationship between crack size and intensity corresponding to the reflected microwaves was obtained in simulations and then verified by experiments. In both simulations and experiments, the axial crack length showed a small influence on the results, especially for shallow crack detection. In the experiments, circumferential and axial cracks with a width of 0.3 mm were detected using microwaves. The experimental results revealed that signal amplitudes decreased when a slit penetrated a pipe wall, probably due to a microwave leakage.
