Affiliations: [a] College of Electrical and Electronic Engineering, Harbin University of Science and Technology, Harbin, China
Correspondence:
[*]
Corresponding author: Mengmeng Ai, College of Electrical and Electronic Engineering, Harbin University of Science and Technology, Harbin 150080, Heilongjiang Province, China. Tel.: +86 187 2460 5449; E-mail: [email protected]
Abstract: With the rapid development of UHV power transmission and transformation project in our country, the gradually increasing electromagnetic capacity and electromagnetic loads of power transformers causes serious heating of the transformers. Therefore, it is particularly important to accurately calculate its temperature rise. Based on field-circuit coupling method, this paper took a 240000 KVA, 330 KV power transformer as the research object to calculate the whole temperature rise and heat transfer characteristics. Firstly, the average velocity of fluid was gotten by three-dimensional flow field of transformer which is calculated by establishing thermal network model of the transformer, phase winding and related structures. And then substitute it into thermal network model. The whole average temperature and temperature rise was gotten by using first law of thermodinamics and after the iteration. And according to the temperature rise test, this paper comprised and analyzed the computed results of thermal network and numerical analysis. Results showed that the error of the thermal network model was within the scope of the permit, and it was simple and quick. The method can provide basis for the future heat transfer research and temperature rise prediction of transformer.
Keywords: Oil-immersed transformer, field-circuit coupling, thermal networks, temperature rise prediction
