Affiliations: [a] School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing, China | [b] State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
Correspondence:
[*]
Corresponding author: Jinhao Qiu, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, Jiangsu, China. Tel./Fax: +86 25 8489 1123; E-mail: [email protected]
Abstract: A micro-power-generator is developed with piezoelectric ceramics, which can convert the structural vibration energy generated by wind power into electricity to provide energy for micro-devices such as wireless sensor nodes. The vibration modes of the device are analyzed. The standard interface circuit for piezoelectric energy recovery and LTC3588-1 voltage stabilization circuit are selected, and the hardware circuit of the device is designed. The output voltage and power characteristics of micro-power-generator were analyzed under different loads, frequencies and amplitudes. The experimental results show that under the same wind speed, When the blunt body is a cuboid, the power generation effect of this device is the best under the optimal load, with the maximum output power of 350.7 μW. Under the same load with the same shape and structure, the load voltage and output power increase with the increase of wind speed.
Keywords: Vortex induced vibration, vibration energy harvest, piezoelectric energy harvest
