Affiliations: [a] School of Information Science and Technology, ShanghaiTech University, Shanghai, China | [b] Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, China | [c] University of Chinese Academy of Sciences, Beijing, China
Correspondence:
[*]
Corresponding author: Chaofeng Ye, School of Information Science and Technology, ShanghaiTech University, Shanghai, China. E-mail: [email protected]
Abstract: This paper presents a new digital fluxgate current sensor based on second harmonic detection for DC and AC measurement. The sensor utilizes a feedback loop to obtain an almost zero-flux condition, i.e., a balance between the magnetic flux of the primary current and the feedback current, in which way the feedback current is proportional to the primary current. The AC magnetic flux is detected with an induction coil, and the DC zero-flux condition is realized by magnetic saturation effect method, where the magnetic core is periodically magnetized and then the second harmonic of the magnetization current is calculated as an indication of the DC magnetic flux. After theoretical derivation, the operating principle of the sensor was investigated using a numerical simulation model built with Simulink of MATLAB. In addition, a prototype sensor was developed and tested. The experiment results demonstrate that the current sensor works properly for DC and AC measurement. The average error is about 0.06% for DC measurement.
Keywords: Fluxgate current sensor, current measurement, digital sensor, magnetic saturation effect
