Temperature control in induction heating forging applications

Issue title: Selected papers from the International Conference Heating by Electromagnetic Sources - HES 2019

Guest editors: Paolo Di Barba, Fabrizio Dughiero, Michele Forzan and Elisabetta Sieni

Article type: Research Article

Authors: Alpini, Flavio^a | Cesano, Mario^a | Ciscato, Dario^a; | Dalle Nogare, Giacomo^a | Natale, Luigi^a

Affiliations: [a] R&D, SAET S.p.A., Leinì, Italy

Correspondence: [*] Corresponding author: Dario Ciscato, SAET S.p.A., via Torino 213, Leinì (TO), Italy. E-mail: [email protected]

Abstract: Temperature is a key parameter in the industrial forging process. Induction heating is a fast, efficient and easily controllable system to have a uniform and controlled thermal profile before forging. The possibility to have a finer control over the temperature management leads to the improvement in process, a better product quality level, and lower maintenance cost. In this paper, the pyrometer noise and unstable signal is filtered and corrected using a Kalman filter based on a numerical electro-thermal model to obtain a reliable signal for the process management.

Keywords: Industrial process control, Kalman filter, induction heating, induction forge, numerical model, Dyna Forge Zone

DOI: 10.3233/JAE-209123

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 63, no. S1, pp. S109-S114, 2020