Visualization method for detecting of residual stress using magnetic domain scope

Issue title: Proceedings from the 17th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2015)

Guest editors: Fumio Kojima, Futoshi Kobayashi and Hiroyuki Nakamoto

Article type: Research Article

Authors: Terashima, Kenichi^{a; *} | Ishiwata, Makoto^a | Suzuki, Kenji^a | Yamaguchi, Katsuhiko^a | Uchimoto, Tetsuya^b | Takagi, Toshiyuki^b

Affiliations: [a] Faculty of Symbiotic Systems Science, Fukushima University, Fukushima, Japan | [b] Institute of Fluid Science, Tohoku University, Sendai, Japan

Correspondence: [*] Corresponding author: Kenichi Terashima, Faculty of Symbiotic Systems Science, Fukushima University, Kanayagawa 1, 960-1296, Fukushima, Japan. Tel.: +81 24 548 5263; E-mail:[email protected]

Abstract: A visualization method is proposed for detecting of residual stress in stainless steels using a magnetic domain scope combined with μ -MOKE measurement system. Grains and local residual stress places such as Lüders band on metal surfaces are clearly observed by this method. Moreover, different magnetic hysteresis curves were measured for each grain. A Monte Carlo simulation was performed for the analysis of the observation results. As a result, this method has possibility of a new magnetic non-destructive evaluation for fatigue of Austenitic stainless steels.

Keywords: Visualization method, magnetic domain, Austenitic stainless steels, non-destructive evaluation, Monte Carlo simulation

DOI: 10.3233/JAE-162055

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 3-4, pp. 1213-1219, 2016