FDTD-CPML method applied to analysis of a novel UWB microstrip antenna

Issue title: Selected Papers from ISEF 2015

Guest editors: Paolo Di Barba and Sƚawomir Wiak

Article type: Research Article

Authors: Gonçalves, S.T.M.^{a; *} | Tomaz, L.M.^a | Resende, U.C.^a | Afonso, M.M.^a | Coppoli, E.H.R.^a | Vollaire, C.^b

Affiliations: [a] Federal Center of Technological Education of Minas Gerais, Av. Amazonas, Belo Horizonte, Brazil | [b] Ecole Centrale de Lyon, Laboratoire AMPÈRE, Ecully, France

Correspondence: [*] Corresponding author: S.T.M. Gonçalves, Federal Center of Technological Education of Minas Gerais, Av. Amazonas, 7675, Belo Horizonte 30510-100, Brazil. E-mail:[email protected]

Abstract: The Ultra Wideband (UWB) technology is promising for data communications over short distances at high data rates. Since the antenna design is critical in the development of UWB systems, this paper proposes a new geometry for a microstrip UWB antenna. The modifications suggested are difficult to analyze because the proposed antenna is constructed using the high lossy FR4 fiber glass and the geometry does not conform with the FDTD mesh. Appropriate modifications on the FDTD method are done and the results are compared with the commercial software CST simulations and experimental results.

Keywords: FDTD/CPML, FR-4 microstrip antennas, ultra wideband - UWB

DOI: 10.3233/JAE-2008

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 51, no. s1, pp. S75-S80, 2016