Affiliations: [a] Mechanics, Surfaces and Materials Processing (MSMP), Arts & Metiers ParisTech, 59046, Lille, France | [b] Arts et Metiers ParisTech, University Lille, EA 2697 - L2EP - Laboratoire d’Electrotechnique et d’Electronique de Puissance, Lille, France | [c] Valeo, Créteil, France | [d] R. Bourgeois, BP 1077 25002, Besançon, France
Correspondence:
[*]
Corresponding author: AbdelKader Benabou, Arts et Métiers ParisTech, University Lille, Centrale Lille, HEI, EA 2697, L2EP Laboratoire d’Electrotechnique et d’Electronique de Puissance, France. E-mail: [email protected]
Abstract: An experimental approach is proposed to study the influence of the punching on the magnetic behavior of a stator core strips. Specimens of a non-oriented M330-A35 punched lamination sheet are picked up from a real manufacturing process. The proposed approach is based on the use of two types of specimens; one is a closed magnetic circuit while the second one is split into two parts. Magnetic measurements are performed on both types and compared with those made on specimens cut by WEDM which has a lower impact on the magnetic behavior. The specific purpose of this paper is to investigate the impact of punching in presence of an air gap that exists in electrical machines between rotor and stator. Therefore a dedicated device, optimized by FEM simulations, is developed in order to account accurately the air gap.
Keywords: Punching, magnetic characterization, stator
