Affiliations: [a] The Department of Electrical Engineering, Chosun University, Gwangju, Korea | [b] Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, Korea
Correspondence:
[*]
Corresponding author: Yong-Jae Kim, The Department of Electrical Engineering, Chosun University, Gwangju 61452, Korea. E-mail: [email protected]
Abstract: The magnetic gears which can replace the mechanical gear system are actively studied recently. Improving the power density is growing importance because the characteristics that as gear ratio grows so power density decreases were observed. This paper analyzes the various characteristics (power density, efficiency, torque ripple, loss, and so on) according to the gear ratio in detail, and proposes a concept that high gear ratio by combining two low gear ratio. A target gear ratio is 10 to 1 and application is 1 kW wind turbine. To obtain the optimal combination, 30 gear ratios were considered, and initial design process was shown about this concept to propose the direction of improving the power density. All models were analyzed with 2D-FEM by numerical analysis.
Keywords: Finite element analysis, magnetic gears, power density, high gear ratio
