Affiliations: [a] School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, China | [b] The National Supercomputing Center, Wuxi, China | [c] State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, China
Correspondence:
[*]
Corresponding author: Shangyu Huang, School of Materials Science and Engineering, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, China. Tel.: +86 189 8628 1313; E-mail: [email protected]
Abstract: Electromagnetic compaction is a preferable high energy rate forming process for brazing powders to improve the brazing performance. The dynamic analysis of electromagnetic compaction of Ag-Cu-Sn multivariate mixed metal powders was conducted by an electromagnetic-mechanical-thermal coupled model and electromagnetic compaction tests. The coupled model consists of electrical circuit model, electromagnetic field model, kinematic model of driving board, thermal field model and powder compaction model, it can be used to make a complete dynamic analysis of the electromagnetic compaction including discharge current, eddy current, mutual interactions of magnetic fields, kinematic motion of driving board, compaction densification behaviors and the energy transfer. The electromagnetic compaction tests of Ag-Cu-Sn multivariate mixed metal powders were carried out with a self-developed WG-IV electromagnetic forming machine. The electromagnetic-mechanical-thermal coupled model has good agreement with the electromagnetic compaction tests, and can provide a more accurate dynamic analysis and optimized process design of electromagnetic compaction. An optimization study for higher relative density was completed by the coupled model, and the brazing performance of the optimized brazing sheet with higher relative density was evaluated to be advantageous in the brazing performance tests.
