Magnetic circuit design of current sensor for in-car power converter circuits

Article type: Research Article

Authors: Miwa, Daiki^a | Takahashi, Yasuhito^a; | Fujiwara, Koji^a | Higuchi, Shingo^b

Affiliations: [a] Department of Electrical Engineering, Doshisha University, Kyoto, Japan | [b] Mitsubishi Logisnext Co. Ltd., Shiga, Japan

Correspondence: [*] Corresponding author: Yasuhito Takahashi, Department of Electrical Engineering, Doshisha University 1-3 Tatara Miyakodani, Kyotanabe, Kyoto 610-0321, Japan. Tel.: +81 774 65 6266; Fax: +81 774 65 6266;  E-mail: [email protected]

Abstract: This paper describes a magnetic circuit design of an in-car low-cost current sensor, which is composed of a laminated core with air gap and a Hall sensor, using a finite-element method. First, a suitable structure of its iron core is examined from the standpoints of the linearity of detected flux density and the ease of its installation. In addition, the effect of eccentric position of a conducting wire and position displacement of the Hall sensor on the measurement accuracy is discussed.

Keywords: Current sensor, laminated core, finite-element method, homogenization method, eccentric position

DOI: 10.3233/JAE-171252

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 59, no. 2, pp. 447-454, 2019