Optimal sensor arrangement for Contactless Inductive Flow Tomography in the case of Rayleigh–Bénard convection

Article type: Research Article

Authors: Wondrak, Thomas^a; | Galindo, Vladimir^a | Stefani, Frank^a | Jacobs, Ralf T.^b

Affiliations: [a] Institut für Fluiddynamik, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany | [b] Elektrotechnisches Institut, Technische Universität Dresden, Dresden, Germany

Correspondence: [*] Corresponding author: Thomas Wondrak. Institut für Fluiddynamik, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstrasse 400, 01328 Dresden, Germany. E-mail: [email protected]

Abstract: The Contactless Inductive Flow Tomography is a procedure that enables the reconstruction of the global flow structure of an electrically conducting fluid by measuring the flow induced magnetic field outside the melt and subsequently solving the associated linear inverse problem. The accuracy of the reconstruction depends on the number and the distribution of the sensors around the vessel. The aim of this investigation is to find a sensor configuration for the reconstruction of a temperature driven flow of a liquid metal in a cylindrical vessel that employs as few sensors as possible without any significant loss of accuracy.

Keywords: Contactless Inductive Flow Tomography, magnetohydrodynamics, integral equations, inverse problems

DOI: 10.3233/JAE-171250

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 59, no. 4, pp. 1291-1296, 2019