Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Öner, Yasemin* | Şenol, İbrahim
Affiliations: Department of Electrical Engineering, Yıldız Technical University, İstanbul, Turkey
Correspondence: [*] Corresponding author: Yasemin Öner, Department of Electrical Engineering, Electric and Electronics Faculty, Yıldız Technical University, Davutpasa Campus, İstanbul, Turke. E-mail:[email protected]
Abstract: This paper presents an analytical sub-domain model for predicting magnetic flux density and winding inductance flux switching permanent magnet (FS-PM) under armature reaction. It is obtained by solving Poisson and Laplace equations in polar coordinates for each domain, i.e. air gap, rotor and stator slots. The model accounts for the influence of interaction between the stator slots and air gap, as well as rotor slots and air gap and winding inductances are obtained from the analytical method and compared by finite element analysis (FEA). Magnetic field distribution are derived from the analytical method and verified by finite element analysis (FEA).
Keywords: Analytical calculation, FEA, permanent magnet, sub-domain model, flux switching, armature reaction
DOI: 10.3233/JAE-160020
Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 51, no. 3, pp. 297-306, 2016
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]