Characteristics analysis of a haptic device using a 2-DOF linear oscillatory actuator

Issue title: Proceedings from the 16th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2013)

Guest editors: Xavier Maldague and Toshiyuki Takagi

Article type: Research Article

Authors: Kono, Yoshinori^{a; *} | Yoshimoto, Takamichi^a | Hirata, Katsuhiro^a

Affiliations: [a] Department of Adaptive machine systems, Osaka University, Suita City, Osaka, Japan | Université Laval, Canada | Tohoku University, Japan

Correspondence: [*] Corresponding author: Yoshinori Kono, Department of Adaptive machine systems, Osaka University, Yamadaoka-1, Suita City, Osaka 565-0871, Japan. Tel.: +81 6 6879 7553; E-mail: [email protected]

Abstract: Haptic devices using asymmetric drive have been attracting attention. We have been studying 2-DOF haptic devices using a 2-DOF oscillatory actuator that can independently output asymmetric acceleration waveforms in 2 axes. This paper presents a new 2-Degree-of-freedom (DOF) linear oscillatory actuator. First, its static characteristics are computed by 3-D finite element method (FEM). Then, the dynamic characteristics of the actuator under asymmetric acceleration drive are clarified through FEM analysis and finally compared with measurements on a prototype.

Keywords: Electromagnetic analysis, finite element method, oscillatory actuator, haptic device, multi-DOF actuator

DOI: 10.3233/JAE-141924

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 45, no. 1-4, pp. 909-916, 2014