Affiliations: [a] Department of Electronics and Systems, Federal
University of Pernambuco, Recife, Brazil | [b] Department of Electrical Engineering and Power
Systems, Federal University of Pernambuco, Recife, Brazil | Université Laval, Canada | Tohoku University, Japan
Correspondence:
[*]
Corresponding author: Lauro Rodrigo Gomes da Silva Lourenco
Novo, Rua Nova Roma, 427, Prazeres, Jaboatao dos Guararapes, Pernambuco
54330-480, Brazil. E-mail: [email protected]
Abstract: Companies of power transmission lines and telecommunications need to
know the condition of their structures. However, there are ones which are
buried or encased in concrete below-ground. Nondestructive techniques are
essentials to investigate the condition of the rods used to anchor guy cables
in guyed towers. A connector and a matching circuit have been designed to allow
a network analyzer to apply and receive high frequency signals on these rods
and, furthermore, to be able to identify corrosion or holes on an anchor rod
using a promising nondestructive technique. High frequency analysis have been
done on the results provided by simulations and experimental tests through the
reflected signals that come in the input port of the connector and matching
circuit. The high frequency connector, named CHAAF, was fabricated and tested.
Keywords: High frequency connector, anchor rods, network analyzer
