A design method of a single-phase LSPM using ferrite magnet

Issue title: Proceedings from the 16th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2013)

Guest editors: Xavier Maldague and Toshiyuki Takagi

Article type: Research Article

Authors: Choi, Myoung-Hyun^a | Kim, Byung-Taek^{a; *}

Affiliations: [a] Department of Electrical Engineering Kunsan National University, Gunsan, Jeollabuk-do, Korea | Université Laval, Canada | Tohoku University, Japan

Correspondence: [*] Corresponding author: Byung-Taek Kim, Department of Electrical Engineering Kunsan National University, Gunsan, Jeollabuk-do 573-701, Korea. E-mail: [email protected]

Abstract: This paper proposes a design method considering an irreversible demagnetization, the largest problem of the single-phase LSPM using ferrite on start-up. A parameter satisfying maximum output is extracted from the equivalent circuit in steady state, which is used to determine number of turns and shape. Here, back electromotive force and maximum output are selected as design variables for minimizing the effect of demagnetization and size, and the optimal design point is determined with consideration on the efficiency and maximum output of the single-phase motor.

Keywords: Design methodology, line-start permanent magnet, synchronous machines

DOI: 10.3233/JAE-141845

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 45, no. 1-4, pp. 307-313, 2014