Optimal design of rotor bars of a written-pole motor by using response surface method for improving the pole-writing performance

Issue title: Selected Papers from the 15th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2011)

Article type: Research Article

Authors: Park, Seong-Cheol^a | Choi, Myoung-Hyun^b | Yuk, Kyeong-Jin^b | Kim, Byung-Taek^{b; *}

Affiliations: [a] Research and Development, Amotech, Pyeongtaek, Kyunggi-do, Korea | [b] Department of Electrical Engineering, Kunsan National University, Jeollabuk-do, Korea

Correspondence: [*] Corresponding author: Byung-Taek Kim, Department of Electrical Engineering, Kunsan National University, Gunsan, Jeollabuk-do 573--701, Korea. Tel.: +82 63 468 9168; Fax: +82 63 469 4699; E-mail: [email protected]

Abstract: In this paper, the effects of magnetization on the rotor conductor of a written-pole motor (WPM) are analyzed and then the shape of the conductor to maximize the amount of the magnetization is designed while the magnet on the rotor is magnetized by an exciter pole. The optimization is performed with design variables that are the shape and number of the rotor bars, where an objective function is set to the amount of magnetization satisfying a constraint of the start-up time. The optimal design is verified by sequentially using a finite elements method and response surface method.

Keywords: Self-start, synchronous motor, written-pole motor

DOI: 10.3233/JAE-2012-1567

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 39, no. 1-4, pp. 973-980, 2012