The use of magnetic field annealing on nodular cast iron for speaker cores

Article type: Research Article

Authors: Mozetic, Halston^a | Fonseca, Eduardo^{b; *} | Schneider, Eduardo L.^c | Kindlein, Jr., Wilson^b | Schaeffer, Lírio^a

Affiliations: [a] Laboratório de Transformação Mecânica – LdTM, Depto de Metalurgia, PPGEM, UFRGS. Av. Bento Gonçalves, 9500, CEP 91501-970, Porto Alegre, RS, Brazil | [b] Laboratório de Design e Seleção de Materiais – LdSM, PPGEM, UFRGS. Av. Osvaldo Aranha, 99/604, CEP 90035-190, Porto Alegre, RS, Brazil | [c] Instituto de Ciências Exatas e Tecnológicas – ICET, Feevale, RS 239, 2755, Vila Nova, CEP 93352-000, Novo Hamburgo, RS, Brazil

Correspondence: [*] Corresponding author. Tel.: +55 54 37012234; E-mail: [email protected]

Abstract: This work presents the application of induced magnetic field during the heat treatment of Nodular Cast Iron to improve the magnetic permeability of this material in order to use it in speakers, as a lower cost alternative to the forged low carbon steel. Magnetic field annealing was carried out observing the performance of the initial magnetic permeability of the samples, and subsequently measured with field saturation equipment. The results were correlated with the data obtained from the use of the SAE 1020 steel, with the same conditions of use and laboratory tests. Metallographic and chemical composition analyses were carried out on the samples, and the correlation of these data with the magnetic properties. Results of this study show the possibility of using magnetic field annealing as a way to increase the permeability of a material with high carbon content as the nodular cast iron.

Keywords: Magnetic field, annealing, nodular cast iron, speaker cores

DOI: 10.3233/JAE-2011-1395

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 37, no. 1, pp. 51-65, 2011