A project aiming at the enhancement of NDT{\&}E of stress corrosion cracking

Issue title: Selected Papers from the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), Part II

Article type: Research Article

Authors: Yusa, Noritaka^{a; b; *} | Miya, Kenzo^b | Komura, Ichiro^c | Chen, Zhenmao^d

Affiliations: [a] Department of Quantum Science and Energy Engineering, School of Engineering, Tohoku University, 6-6, Aramaki Aza Aoba, Aoba-ku, Sendai, Miyagi 980-8579, Japan | [b] IIU Corp. 2-7-17, Ikenohata, Taito, Tokyo 110-0008, Japan | [c] Nondestructive Evaluation Center, Japan Power Engineering and Inspection Corporation, 14-1, Benten, Tsurumi, Yokohama, 230-0044, Japan | [d] School of Aerospace, Xi'an Jiaotong University, 28 West Xianning Road, Xi'an, 710049, China

Correspondence: [*] Corresponding author. Tel.: +81 22 795 7906; Fax: +81 22 795 7906; E-mail: [email protected]

Abstract: This paper introduces a research project the authors have proposed. The project aims to gather non-destructive testing data of stress corrosion cracking specimens and present them as benchmark data freely available to researchers in the field. Round-robin test using seven austenitic stainless steel plate specimens with artificial stress corrosion cracking is carried out, and they are measured using various non-destructive testing methods. The data measured are made available together with the results of destructive tests to confirm the true profile of the cracking.

Keywords: Nondestructive testing, round-robin test, benchmark data, austenitic stainless steel

DOI: 10.3233/JAE-2010-1288

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 3-4, pp. 1587-1590, 2010