Modeling and simulation of direct torque controlled SPMSM Drive incorporating magnetic saturation saliency

Issue title: Selected Papers from the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), Part I

Article type: Research Article

Authors: Wang, Yi^{a; *} | Zhu, Jianguo^a | Wang, Shuhong^b | Guo, Youguang^a | Xu, Wei^a

Affiliations: [a] School of Electrical, Mechanical and Mechatronic Systems, University of Technology, Sydney, NSW 2007, Australia | [b] Faculty of Electrical Engineering, Xi'an Jiaotong University, Xi'an 710049, China

Correspondence: [*] Corresponding author. Tel.: +61 2 9514 2388; E-mail: [email protected]

Abstract: In this paper a comprehensive nonlinear model of surface mounted permanent magnet synchronous machine (SPMSM) is proposed considering both the structural and the saturation saliencies to enable the numerical simulation of new rotor position detection algorithms. An experiment platform is carried out to test and collect the incremental inductance values varying again the stator current levels and the rotor position. The Least Relative Residual Sum of Square (LRRSS) method is employed in the nonlinear inductance function regression. After experimentally identifying out all the parameters, a nonlinear mathematic model of SPMSM is built up. Furthermore, the direct torque control (DTC) scheme is applied to this new model to verify the model and simulate the machine performance.

Keywords: Finite element methods, nonlinear magnetic, PM machines, saturation saliency

DOI: 10.3233/JAE-2010-1147

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 1-2, pp. 473-479, 2010