Iron loss properties of a practical rotating machine stator core at each manufacturing stage

Issue title: Selected Papers from the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), Part I

Article type: Research Article

Authors: Nakazaki, Osamu^{a; *} | Kai, Yuichiro^a | Todaka, Takashi^a | Enokizono, Masato^a

Affiliations: [a] Faculty of Engineering, Oita University, 700 Dannoharu, Oita 870-1192, Japan

Correspondence: [*] Corresponding author. Tel.: +81 97 554 7843; Fax: +81 97 554 7843; E-mail: [email protected]

Abstract: This paper presents measured iron loss properties of a rotating machine's stator core at each manufacturing stage. It is well known that the magnetic properties deteriorate in constructed cores due to stress in manufacturing process and the iron loss increases in comparison with one of the ideal material used in designing, and then the building factor becomes more than one. In this paper, knowledge obtained in development of a simplified evaluation method of iron losses in actual stator cores of rotating machines is presented.

Keywords: Electrical steel sheet, iron loss, manufacturing process, rotating machines

DOI: 10.3233/JAE-2010-1099

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 1-2, pp. 79-86, 2010