Design of magnetorheological devices based on flow modes

Issue title: Proceedings of the twelfth International Symposium on Interdisciplinary Electromagnetic, Mechanic and Biomedical Problems, ISEM Bad Gastein

Article type: Research Article

Authors: Sato, Yosuke^a | Shiraishi, Toshihiko^{a; *} | Morishita, Shin^a

Affiliations: [a] Yokohama National University. 79-7 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan

Correspondence: [*] Corresponding author. Tel.: +81 0 45 339 4092; Fax: +81 0 45 339 4092; E-mail: [email protected]

Abstract: In this paper, two types of rheometers were developed to measure typical characteristics of MR fluids. The shear stress was measured with one rheometer under shear deformation and the pressure difference was measured with the other under pressure flow on changing flow rate, magnetic flux density, and gap length through which MR fluids flow. Furthermore, the design process of MR devices using the experimental results was shown.

Keywords: Magnetorheological fluid, rheometer, design methodology

DOI: 10.3233/JAE-2007-886

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 25, no. 1-4, pp. 607-611, 2007