Crack detection method using electromagnetic waves

Issue title: ASAEM 2003

Article type: Research Article

Authors: Hashizume, H.^{a; *} | Shibata, T.^a | Yuki, K.^a

Affiliations: [a] Department of Quantum Science and Energy Engineering, Tohoku University, Aramaki, Aoba, Sendai, 980-8579, Japan

Correspondence: [*] Corresponding author. E-mail: [email protected]

Abstract: The NDT method using electromagnetic waves has availability for crack detection in large pipes or structures in nuclear power plants. The purpose of this study is then, to develop a new method to determine the crack size and location with high speed and accuracy. Through this study, it has been shown that the transmitted wave carries a lot of information on crack depth and the obtained signals of reflected wave below the cut-off frequency depend on the crack position. Experimental results indicate that there exists attractive possibility in the new NDT method.

DOI: 10.3233/JAE-2004-662

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 20, no. 3-4, pp. 171-178, 2004