Comparison between two models of magnetic hysteresis accounting for stress

Issue title: Special Volume: Proceedings of the eleventh International Symposium on Applied Electromagnetics and Mechanics ISEM-Versailles ISEM 03

Article type: Research Article

Authors: Bernard, Yves^a | Ossart, Florence^b

Affiliations: [a] LGEP, Supelec, Plateau du Moulon, 91192 Gif sur Yvette Cedex, France. E-mail: [email protected] | [b] LMT-Cachan, 61, av. Pt Wilson, 94 235 Cachan Cedex, France. E-mail: [email protected]

Abstract: Two models of hysteresis including the influence of an elastic stress on the magnetic behavior of the material are analyzed. They are shown to have different properties, but comparable accuracy. The Preisach model needs a large amount of experimental data, but is very general, whereas the internal variable model uses few parameters, but can not fit any shape of hysteresis loops. The advantages and drawbacks of the two approaches are illustrated in the case of two electrical steels: a 0.5 mm thick Fe-3%Si alloy and a 0.4 mm thick Fe48%-Co48%-Va2% alloy.

Keywords: magneto-elastic coupling, hysteresis models, electrical steels, Fe-Si alloy, Fe-Co alloy

DOI: 10.3233/JAE-2004-625

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 19, no. 1-4, pp. 551-556, 2004