Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Proceedings of the tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo
Article type: Research Article
Authors: Ochiai, Hiroyasua; * | Torii, Susumua
Affiliations: [a] Department of Electrical & Electronic Engineering Musashi Institute of Technology, 1-28-1, Tamazutsumi, Setagaya, Tokyo 158-8557, Japan
Correspondence: [*] Corresponding author: Hiroyasu Ochiai, Tel.: +81 3 3703 3111; Fax: +81 3 5707 2212; E-mail: [email protected]
Abstract: This paper reports about the validity of the numerical model for presuming the internal current of the superconductor that is difficult to measure. The validity of the numerical method is confirmed by the simple analysis model. This model is constituted applying boundary element method and the difficulty of measuring the internal current is solved by the inverse problem from the exterior flux density distribution. Since the application of this model draws the solution of an irreversible magnetization phenomenon not clarified, the apparatus that uses the superconductor will develop.
DOI: 10.3233/JAE-2002-455
Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 15, no. 1-4, pp. 237-242, 2002
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]