Fabrication and test of a small experimental superconducting homopolar machine with axially laminated rotor disks

Issue title: Proceedings of the tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo

Article type: Research Article

Authors: Ishigohka, Takeshi^{a; *} | Ninomiya, Akira^a | Hayakawa, Kihachiro^a | Mitsuhashi, Tsukasa^a

Affiliations: [a] Seikei University, 3-3-1 Kichijoji-Kita, Musashino-shi, 180-8633 Tokyo, Japan

Correspondence: [*] Corresponding author: Takeshi Ishigohka, Tel.: +81 422 37 3741; Fax: +81 422 37 3871; E-mail: [email protected]

Abstract: In order to examine the fundamental availability of a homopolar machine with laminated armature rotor disks, the authors fabricated and tested a small superconducting experimental homopolar machine with two rotor disks. The machine was tested as a generator. The obtained experimental data show that the output voltage of the 2-disk machine is about 2 times larger than that of the 1-disk machine. From this experimental result, we can conclude that the output voltage of a homopolar generator with axially laminated rotor disks is proportional to the number of the disks.

DOI: 10.3233/JAE-2002-390

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 14, no. 1-4, pp. 115-120, 2002