Electromagnetic retarder design using finite element analysis

Issue title: Proceedings of the tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo

Article type: Research Article

Authors: Enokizono, Masato^a | Todaka, Takashi^a | Takahashi, Hideki^{a; *}

Affiliations: [a] Faculy of Engineering, Oita University, 700 Dannoharu, Oita 871-1192, Japan

Correspondence: [*] Corresponding author: Hideki Takahashi, Faculty of Engerring, Oita University, 700 Dannoharu, Oita 870-1192, Japan. Tel.: +81 97 554 7824; Fax: +81 97 553 7824; E-mail:[email protected]

Abstract: The electromagnetic retarders are widespread in heavy vehicle and train industry. The electromagnet type and permanent magnet type retarders are developed at a variety of operating forces to reduce speeds. This paper describes the use of the finite element method with an upwind interpolation function in designing the permanent magnet type retarder. The equation of motion was solved for the analysis of the deceleration process of the conductive plate. The suitable permanent magnet anangements and the yoke constructions are made clear in the obtained numerical results.

DOI: 10.3233/JAE-2002-354

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 14, no. 1-4, pp. 43-46, 2002