Elastic vibration of steel plate with magnetic force for restraining horizontal position in magnetic levitation

Issue title: Proceedings of the tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo

Article type: Research Article

Authors: Igusa, Atsushi^a | Oshinoya, Yasuo^b | Ishibashi, Kazuhisa^{c; *}

Affiliations: [a] Graduate Student, Course of Mechanical Engineering, Graduate School of Engineering, Tokai University, Japan | [b] Department of Mechanical Engineering, Future Science and Technology Joint Research Center, Tokai University, Japan | [c] Department of Mechanical Engineering, Faculty of Engineering, Tokai University, 2-28-4 Tomigaya, Shibuya-ku, Tokyo, 151-0063 Japan

Correspondence: [*] Corresponding author: Kazuhisa Ishibashi, Tel.: +81 3 3467 2211 ext. 381; E-mail: [email protected]

Abstract: It has been confirmed that a thin steel plate can be levitated by controlling the current of electromagnets. However, the plate gets out of position in the case of high-speed conveyance of the steel plate if there is no force for restraining the plate from slipping horizontally. Then, electromagnets for controlling the horizontal position are installed. In this paper, we study how the elastic vibration of the steel plate is affected by the magnetic field produced by the electromagnets. The magnetic force pulls back the steel plate to its center. With the magnetic field produced by the electromagnets, the frequency of the vibration increases and the vibration is attenuated more rapidly. In addition, the tensile force makes the steel plate flat.

DOI: 10.3233/JAE-2002-313

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 13, no. 1-4, pp. 53-58, 2002