Repulsive magnetic bearing stabilized by the motion control of magnets with a piezoelectric actuator

Issue title: Proceedings of the tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo

Article type: Research Article

Authors: Mizuno, Takeshi^{a; *} | Aizawa, Mitsunori^b

Affiliations: [a] Department of Mechanical Engineering, Saitama University | [b] Advantest Corporation

Correspondence: [*] Corresponding author: Department of Mechanical Engineering, Saitama University Shimo-Okubo 255, Saitama 338-8570, Japan. Tel.: Int+48 858 3455; Fax: Int+48 856 2577; E-mail: [email protected]

Abstract: A magnetic bearing system using forces of repulsion between permanent magnets was developed. In the developed magnetic bearing, the radial motions of the rotor are passively supported by repulsive forces. The motion in the axial direction, which is inherently unstable, is stabilized by using the motion control of the permanent magnets for passive radial suspension with a piezoelectric actuator. The developed magnetic bearing suspended a rotor without any mechanical contact. The characteristics of the suspension system were studied both theoretically and experimentally.

DOI: 10.3233/JAE-2002-312

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 13, no. 1-4, pp. 155-162, 2002