Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Tan, Qing Changa; * | Kou, Zun Quana | Li, Weia | Pei, Yong Chena
Affiliations: [a] Institute of Mechanical Science and Engineering, Jilin University, Nan-ling Campus, Changchun, 130025, P.R. China
Correspondence: [*] Corresponding author: Tel.: +86 431 5705757; Fax: +86 431 5705288; E-mail: [email protected]
Abstract: In the present work, the distribution of non-uniform magnetization of magnetic rings is experimentally measured and analyzed. The effects of non-uniform magnetization and the soft-magnetic material on the performance of a magnetic bearing are investigated using the theory of magnetic charges, and a model for predicting magnetic force of magnetic-thrust bearings constructed from permanent magnets is developed. The model is verified using the experimental rig built. From the model, fluctuations of the magnetic force and bearing stiffness caused by the non-uniform magnetization are calculated and analyzed.
Keywords: magnetic bearing, magnetic force, magnetization, friction, bearing stiffness
DOI: 10.3233/JAE-2004-296
Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 20, no. 2, pp. 71-80, 2004
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]