Journal of Intelligent & Fuzzy Systems - Volume 46, issue 1

Authors: Kumar, M. | Kavitha, A.

Article Type: Research Article

Abstract: An exponential growth of users demands ubiquitous connectivity, which requires the integration of new technology. Therefore, Device to Device (D2D) communication has been considered a promising technology that utilizes effective and efficient communication. Even though numerous studies have been conducted for establishing secure D2D communication, however, existing techniques face challenges like privacy, security threats, and poor generality. To overcome these issues a novel Deep-MAD model is proposed to preserve data privacy along with its access control in the D2D network and multiple attack detection in a fog environment. A Fully Homomorphic Elliptic Curve Cryptography (FHECC) is introduced to transmit data …securely in a D2D network. The data owner uses FHECC algorithm to encrypt the plain text into cipher text before storing it on the fog. Whenever the user requests data from the fog, the fog service provider confirm the user’s access control. Furthermore, the deep learning-based Bi-LSTM is used to differentiate the device as an authorized or unauthorized user. If the IP address is genuine then the inverse FHECC is used to decrypt the data for authorized users. Otherwise, the particular device is blocked and it is sent for further verification for classifying the types of attacks. The effectiveness of the proposed strategy is examined using several parameters, such as computational complexity, scalability, accuracy, and Execution time. The proposed technique improves the overall computational overhead of 31.77, 9.34, and 4.67 better than AKA protocol, lightweight cipher, and FHEEP respectively. Show more

Keywords: Bi-LSTM, device-to-device communication, cryptography, security, fog environment

DOI: 10.3233/JIFS-235362

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 955-966, 2024

Authors: Rehman, Ubaid ur | Mahmood, Tahir

Article Type: Research Article

Abstract: Wireless sensor networks are flexible monitoring systems that save track of, data, and communicate multipoint digital information interpretations to other devices. Wireless sensor networks meaningly enhance the accuracy, breadth, and extent of local data collection, commonly doing away with the requirement for expensive data wiring and recurring manual checks at risky, remote, or inaccessible locations. As a result, it is utilized to keep an eye on systems and environmental or physical parameters. In this manuscript, we expand the Heronian mean operators in the model of bipolar complex fuzzy linguistic set to concoct bipolar complex fuzzy linguistic arithmetic Heronian mean, bipolar …complex fuzzy linguistic weighted arithmetic Heronian mean, bipolar complex fuzzy linguistic geometric Heronian mean and bipolar complex fuzzy linguistic weighted geometric Heronian mean operators. We also inspect the special cases of the invented bipolar complex fuzzy linguistic arithmetic Heronian mean and bipolar complex fuzzy linguistic geometric Heronian mean operators. Moreover, in this manuscript, we concoct a technique of decision-making in the model of a bipolar complex fuzzy linguistic set with the assistance of the invented operators. As the selection and prioritization of the various types of Wireless sensor networks is the decision-making dilemma, we prioritize various types of Wireless sensor networks by employing the concocted technique of decision-making and by taking artificial data in the model of the bipolar complex fuzzy linguistic set. To reveal the influence and excellence of the concocted work, a comparative study is given in this manuscript. Show more

Keywords: Wireless sensor networks, arithmetic/geometric Heronian mean operators, bipolar complex fuzzy linguistic set.

DOI: 10.3233/JIFS-232167

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 967-990, 2024

Authors: Zhang, Yuhua | Li, Yuerong | Che, Jinxing

Article Type: Research Article

Abstract: Accurate prediction of carbon price is of great value for production, operation, investment decisions and the establishment of carbon pricing mechanism. However, the large amount of data often limits the application of learning model with good predictive performance in carbon price prediction. Therefore, the development of learning algorithms with low computational complexity has become a research hotspot. Among them, subsampling integration technology is an effective method to reduce the computational complexity. However, lack of data representativeness in subsamples and ignorance of differences among submodels inhibit the prediction performance of the subsampled ensemble model. This project proposes an optimal weight random …forest ensemble model with cluster-based subsampling (FCM-OWSRFE) for carbon price forecasting. Firstly, Fuzzy C-means cluster-based subsampling to ensure the data representativeness of subsamples. Secondly, a series of sub-random forest models are built based on subsamples with data representativeness. Finally, an optimal weight ensemble model from these sub-models is derived. To verify the validity of the model, we test FCM-OWSRFE model with the carbon price of Guangzhou Emission Exchange and the carbon price of Hubei Carbon Emission Exchange, respectively. Experimental results show that Fuzzy C-means cluster-based subsampling and the optimal weight scheme can efficiently improve the prediction performance of the subsampled random forest ensemble model. Show more

Keywords: Random forest, Fuzzy C-means clustering, subsampling, optimal weight ensemble

DOI: 10.3233/JIFS-233422

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 991-1003, 2024

Authors: Chenmin, Ni | Marsani, Muhammad Fadhil | Shan, Fam Pei

Article Type: Research Article

Abstract: Traffic sign recognition is of great significance to promote traffic sustainability and maintain traffic safety. GPS monitoring systems and advanced autonomous vehicles are often heavily reliant on camera imagery. Algorithms based on dark channel prior are susceptible to color distortion when processing traffic images containing bright sky or high-brightness areas, which can negatively impact the identification of traffic signals and signage located in elevated positions. To address this issue, this paper proposes a dehazing algorithm (SRSTO) that combines sky region segmentation and transmittance optimization. Firstly, the gradient, brightness and saturation information are calculated, followed by the construction of a threshold …function used in area segmentation. This approach is utilized to partition the image into areas not containing sky highlights and the area that contains them. Subsequently, the dark channel images of the sky and the non-sky regions are acquired, morphological operations are further performed in layers and blocks, and then the atmospheric scattered light value is calculated. Secondly, the functional relationship between the transmittance of the sky region and the brightness of the image is constructed, the transmittance of the sky and the non-sky region are optimized, and the transmittance map is further improved by using guided filtering. A simulated annealing algorithm is employed to intelligently optimize parameters such as sky segmentation threshold and sky brightness area transmittance, followed by improving the adaptability of the algorithm. Finally, combined with Gaussian filtering and Sobel edge enhancement, the image brightness is further adjusted. Using Information Entropy and NIQE as objective evaluation indexes, combined with subjective evaluation, it is concluded that the proposed method has good convergence and self-adaptive ability, and the objective indexes and subjective effects are better, especially for the hazed images containing air traffic signs. Show more

Keywords: Haze removal, traffic image, sky region segmentation, transmission optimization, simulated annealing algorithm

DOI: 10.3233/JIFS-233433

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1005-1017, 2024

Authors: Yan, Li

Article Type: Research Article

Abstract: To improve the effect of immersive animation design, this paper combines digital media technology (DT) to establish an immersive animation design system and analyzes the media digital signal data processing algorithm. According to the advantages and disadvantages of the FHT algorithm and probabilistic algorithm, this paper proposes the FHT-SLM algorithm and the FHT-IPTS algorithm. Moreover, this paper analyzes the basic principle of TPWC transform and M-TPWC and the CO-OFDM system of cascaded FHT algorithm and M-TPWC algorithm. Finally, this paper simulates the CO-OFDM simulation system built by Matlab2018.a and Optisystem. Through the experimental analysis results, the reliability of the algorithm …and the system in this paper is verified, and the design effect of immersive animation is effectively improved. Show more

Keywords: DT, immersion, animation design, influence

DOI: 10.3233/JIFS-235793

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1019-1028, 2024

Authors: Khan, Sami Ullah | Al Ghour, Samer | Hussain, Shoukat | Saeed, Maha Mohammed | Hussain, Fiaz | Mehmood, Arif | Park, Choonkil

Article Type: Research Article

Abstract: The concept of the fuzzy graph (FG) and the simplification of its type have been designed with many real-world concerns, decision-making, network problems, and other types of impression in mind. This article is essentially a generalization of fuzzy graph theory with their association in settings where four organizations of membership grade are characterized by imprecision. The contemporary idea of domination in picture fuzzy graph (PFG) is given the generalization of fuzzy graph domination and intuitionistic fuzzy graph (IFG) domination is unit on the innovative idea of picture fuzzy graph. This article is the main focus on the graph of the …picture fuzzy set. Additionally, this research paper concludes with the concept of domination theory (DT) and double domination theory (DDT) in the concept of environment. Obviously, the framework of picture fuzzy graph is purposed and their connected theory is obtained together with presented examples. Supplementary the domination theory (DT) in the picture fuzzy graph. A few order, strength, cardinality, and domination of completeness, neighbors in a picture fuzzy graph, and the DDS and given some examples are likewise studied in the concept of picture fuzzy graph in the environment. The application of the politician campaign is novel exploiting the projected study and curious how to double dominate would relationship with the politician campaign. Finally, a comparison between the current effort and the prior effort is made, and the advantages of the work done in the context of a picture fuzzy graph are discussed. Show more

Keywords: Intuitionistic fuzzy set, intuitionistic fuzzy graph, picture fuzzy graph, domination, double domination

DOI: 10.3233/JIFS-230918

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1029-1041, 2024

Authors: Sharma, Rakesh | Sahay, Kuldeep | Singh, Satyendra

Article Type: Research Article

Abstract: The Challenge to stabilize the grid frequency increases with the increment of renewable energy resources. System inertia/frequency control is a significant concern for maintaining system stability with a fast response time during the load transition. This manuscript proposes surface-mounted permanent magnet synchronous generator (SPMSG) based wind energy conversion system (WECS) with a frequency support DC-link controlling loop and a converter protective DC-link voltage-controller frequency support system. To achieve power exchange, the frequency control system (FCS) for the SPMSG-based wind turbine supports the grid-side virtual inertia. The DC-link voltage is disturbed during the load transition to maintain the frequency, while the …electrolytic capacitor requires extra care regarding the DC bus voltage. This manuscript incorporates the FCS system with a supercapacitor and dynamic voltage limiter to avoid additional care of the DC bus voltage. A detailed analysis of system frequency with the additional load increment, normal connected load decrement, and various fault scenarios has been done. The proposed system is compared with the existing virtual inertia support (VIS). The simulation results show that the proposed frequency control system-based VIS efficiently limits the frequency deviations & DC-link voltage. The results are verified in the OPAL-RT 4510 real-time simulator environment to ensure the efficacy of the proposed system. Show more

Keywords: Frequency control system, wind energy conversion system, surface-mounted permanent magnet synchronous generator (SPMSG), variable speed wind turbine system, virtual inertia support.

DOI: 10.3233/JIFS-233729

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1043-1057, 2024

Authors: Pu, Tongzheng | Huang, Chongxing | Yang, Yifei | Yang, Jingjing | Huang, Ming

Article Type: Research Article

Abstract: Hybrid tabular-textual question answering (QA) is a crucial task in natural language processing that involves reasoning and locating answers from various information sources, primarily through numerical reasoning and span extraction. Cur-rent techniques in numerical reasoning often rely on autoregressive models to decode program sequences. However, these methods suffer from exposure bias and error propagation, which can significantly decrease the accuracy of program generation as the decoding process unfolds. To address these challenges, this paper proposes a novel multitasking hybrid tabular-textual question answering (MHTTQA) framework. Instead of generating operators and operands step by step, this framework can independently generate entire program …tuples in parallel. This innovative approach solves the problem of error propagation and greatly improves the speed of program generation. The effectiveness of the method is demonstrated through experiments using the ConvFinQA and MultiHiertt datasets. Our proposed model outperforms the strong FinQANet baselines by 7% and 7.2% Exe/Prog Acc and the MT2Net baselines by 20.9% and 9.4% EM/F1. In addition, the program generation rate of our method far exceeds that of the baseline method. Additionally, our non-autoregressive program generation method exhibits greater resilience to an increasing number of numerical reasoning steps, further highlighting the advantages of our proposed framework in the field of hybrid tabular-textual QA. Show more

Keywords: Tabular-textual question answering, numerical reasoning, program generation

DOI: 10.3233/JIFS-234719

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1059-1068, 2024

Authors: Rajasekaran, P. | Duraipandian, M.

Article Type: Research Article

Abstract: Internet of Things (IoT), a distributed healthcare system has integrated different medical resources with sensors and actuators. In this research paper proposes a secure healthcare monitoring system for IoT based distributed healthcare systems in the cloud using blockchain and deep learning (DL) mechanisms. The proposed system involved three phases: secure data transmission, data storage, and disease classification system. Initially, the patients are authenticated via blockchain mechanism and their data is encrypted via Effective Key-based Rivest Shamir Adelman (EKRSA), in which the keys are generated using Circle chaotic map and Linear inertia weight-based Honey Badger Optimization (CLHBO) algorithm. Next, in the …data storage phase, these encrypted IoT data are securely stored in the cloud using blockchain technology in a distributed manner. Finally, in the disease classification, the data are gathered from the publicly available dataset, and these collected datasets are preprocessed to handle missing values and data normalization. After that, the proposed system applies a radial basis kernel-based linear discriminant analysis (RBKLDA) model to reduce the dimensionality of the dataset. At last, the disease classification is done by optimal parameter-centered bidirectional long short-term memory (OPCBLSTM). The proposed EKRSA system archives maximum throughput of 99.05% and reliability of 99.66, which is superior to the existing approaches. The OPCBLSTM is investigated for its disease classification process, the proposed one achieves 99.64% accuracy with less processing time of 6 ms, which is superior to the existing classifiers. The experimental analysis proves that the system attained better security and classification metrics results than the existing methods. Show more

Keywords: Internet of Things (IoT), healthcare monitoring, secure data transmission, blockchain, disease prediction, machine learning (ML), deep learning (DL)

DOI: 10.3233/JIFS-234884

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1069-1084, 2024

Authors: Xu, Xueyan | Wang, Jiayin

Article Type: Research Article

Abstract: In this study, we propose a new classification method by adopting some ideas originating from the fuzzy comprehensive evaluation (FCE). To make the FCE be a classifier, the class labels in classification problems are regarded as the evaluation remarks in the FCE, and the attributes in these two domains are regarded to be consistent. Then, to implement the FCE model B  = W ∘ R and obtain an accurate classification result, on the one hand, a learning algorithm, which is based on the joint distribution of attribute values and is dynamic, is proposed to construct the fuzzy relational matrix R …; on the other hand, equal weight is considered to constitute the weight vector W. Meanwhile, for a continuous dataset, the discretization method and the determination of the discretization class number corresponding to the proposed classifier are discussed. The proposed classifier not only innovatively extends the FCE to data mining but also has its own classification advantages, that is, it is easy to operate and has good interpretability. Finally, we perform some numerical experiments using publicly available datasets, and the experimental results demonstrate that the proposed classifier outperforms some existing classifiers. Show more

Keywords: Fuzzy set, fuzzy comprehensive evaluation, classification, data mining

DOI: 10.3233/JIFS-232622

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1085-1100, 2024

Authors: Tiwari, Devendra | Gupta, Anand

Article Type: Research Article

Abstract: Tables are commonly used for effective and compact representation of relational information across the data in diverse document classes like scientific papers, financial statements, newspaper articles, invoices, or product descriptions. However, table structure detection is a relatively simple process for humans, but recognizing precise table structure is still a computer vision challenge. Further, innumerable possible table layouts increase the risk of automatic topic modeling and understanding the capability of each table from the generic document. This paper develops the framework to recognize the table structure from the Compound Document Image(CDI). Initially, the bilateral filter is designed for image transformation, enhancing …CDI quality. An improved binarization-Sauvola algorithm (IBSA) is proposed to degrade the tables with uneven illumination, low contrast, and uniform background. The morphological Thinning method extracts the line from the table. The masking approach extracts the row and column from the table. Finally, the ResNet Attention model optimized over Black Widow optimization-based mutual exclusion (BWME) is developed to recognize the table structure from the document images. The UNLV, TableBank, and ICDAR-2013 table competition datasets are used to evaluate the proposed framework’s performance. Precision and accuracy are the metrics considered for evaluating the proposed framework performance. From the experimental results, the proposed framework achieved a precision value of 96.62 and the accuracy value of 94.34, which shows the effectiveness of the proposed approach’s performance. Show more

Keywords: Image transformation, table extraction, ResNet Attention model, table structure recognition

DOI: 10.3233/JIFS-232646

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1101-1114, 2024

Authors: Zhang, Yu | Shen, Bo | Zhang, Jinglin | Zhang, Zhiyuan

Article Type: Research Article

Abstract:  The task of conversational machine reading comprehension (CMRC) is an extension of single-turn machine reading comprehension to multi-turn settings, to relflect the conversational way in which people seek information. The correlations between multiple rounds of questions mean that the conversation history is critical to solving the CMRC task. However, existing CMRC models ignore the interference that arises from using excessive historical information to answer the current question when incorporating the dialogue history into the current question. In this paper, an effective Question Selection Module (QSM) is designed to select most relevant historical dialogues when answering the current question through question …coupling and coarse-to-fine matching. In addition, most existing approaches perform memory inference by stacked RNNs at context word level, without considering semantic information flowing in the direction of conversation flow. In view of this problem, we implement sequential recurrent reasoning at the turn level of the dialogue, where the turn information contains all the filtered historical semantics for the current step. We conduct experiments on two benchmark datasets, QuAC and CoQA, released by Stanford University. The results confirm that our model satisfactorily captures the valid history and performs recurrent reasoning, and our model achieves an F1-score of 83.0% on CoQA dataset and 67.8% on QuAC dataset, outperforming the best alternative model by 4.6% on CoQA and 2.7% on QuAC. Show more

Keywords: Conversational machine reading comprehension, conversation history, recurrent reasoning, attention mechanism

DOI: 10.3233/JIFS-233828

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1115-1128, 2024

Authors: Li, Ping | Ni, Zhiwei | Zhu, Xuhui | Song, Juan | Liu, Wentao

Article Type: Research Article

Abstract: The histopathological image classification method, based on deep learning, can be used to assist pathologists in cancer recognition in colon histopathology. The popularization of automatic and accurate histopathological image classification methods in this way is of great significance. However, smaller medical institutions with limited medical resources may lack colon histopathology image training sets with reliable labeled information; thus they may be unable to meet the needs of deep learning for many labeled training samples. Therefore, in this paper, the colon histopathological image set with rich label information from a certain medical institution is taken as the source domain; the colon …histopathological image set from a smaller medical institution with limited medical resources is taken as the target domain. Considering the potential differences between histopathological images obtained by different institutions, this paper proposes a classification learning framework, namely unsupervised domain adaptation with local structure preservation for colon histopathological image classification, which can learn an adaptive classifier by performing distribution alignment and preserving intra-domain local structure to predict the labels of the colon histopathological images from institutions with lower medical resources. Extensive experiments demonstrate that the proposed framework shows significant improvement in accuracy and specificity of colon histopathological images without reliable labeled information compared to models without unsupervised domain adaptation. Specifically, in an affiliated hospital in Fuyang City, Anhui Province, the classification accuracy of benign and malignant colon histopathological images reaches 96.21%. The results of comparative experiments also show promising classification performance of our method in comparison with other unsupervised domain adaptation methods. Show more

Keywords: Colon cancer, histopathological image, cross-domain classification, unsupervised domain adaptation, transfer learning

DOI: 10.3233/JIFS-234920

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1129-1142, 2024

Authors: Zhang, Kai | Wang, Yixiang | Hu, Zhicheng | Zhou, Ligang

Article Type: Research Article

Abstract: Combination forecasting is an effective tool to improve the forecasting rate by combining single forecasting methods. The purpose of this paper is to apply a new combination forecasting model to predicting the BRT crude oil price based on the dispersion degree of two triangular fuzzy numbers with the circumcenter distance and radius of the circumcircle. First, a dispersion degree of two triangular fuzzy numbers is proposed to measure the triangular fuzzy numbers with the circumcenter distance and radius of the circumcircle, which can be used to predict the fluctuating trend and is suitable for crude oil futures price. Second, three …single prediction methods (ARIMA, LSSVR and GRNN) are then presented to combine traditional statistical time set prediction with the latest machine learning time prediction methods which can strengthen the advantage and weaken the disadvantage. Finally, the practical example of crude oil price forecasting for London Brent crude futures is employed to illustrate the validity of the proposed forecasting method. The experimental results show that the proposed forecasting method produces much better forecasting performance than some existing triangular fuzzy models. The prediction error is reduced to 2.7 from 3–5 in oil price combination forecasting, in another comparison experiment the error is reduced to 0.0135 from 1. The proposed combination forecasting method, which fully capitalizes on the time sets forecasting model and intelligent algorithm, makes the triangular fuzzy prediction more accurate than before and has effective applicability. Show more

Keywords: Oil price forecasting, dispersion degree of two triangular fuzzy numbers, ARIMA, LSSVR, GRNN

DOI: 10.3233/JIFS-230741

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1143-1166, 2024

Authors: Narayanan, Badri | Muthusamy, Sreekumar

Article Type: Research Article

Abstract:  The performance of Interval type-2 fuzzy logic system (IT2FLS) can be affected by many factors including the type of reduction methodology followed and the kind of membership function applied. Further, a particular membership function is influenced by its construction, the type of optimisation and adaptiveness applied, and the learning scheme adopted. The available literature lags in providing detailed information about such factors affecting the performance of IT2FLS. In this work, an attempt has been made to comprehensively study the factors affecting the performance of IT2FLS by introducing a new trapezoidal-triangular membership function (TTMF). A real-time application of drilling operation has …been considered as an example for predicting temperature of the job, which is considered as one of the key state variables to evaluate. A detailed comparison based on membership functions (MFs) such as triangular membership function (TrMF), trapezoidal membership function (TMF), the newly introduced trapezoidal-triangular membership function (TTMF), semi-elliptic membership function (SEMF), and Gaussian membership function (GMF) has been performed and presented. Further, the average error rate obtained with two “type-reduction” methods such as “Wu-Mendel” uncertainty bounds and Center of sets type reduction (COS TR) has also been discussed. This study provides information for selecting a particular MF and “type reduction” scheme for the implementation of IT2FLS. Also, concludes that MF having fewer parameters such as GMF and SEMF possess significant advantages in terms of computation complexity compared to others. Show more

Keywords: Interval type-2 fuzzy logic system, semi-elliptic membership function, trapezoidal membership function, trapezoidal-triangular membership function, center of sets type reduction, Wu-Mendel uncertainty bound

DOI: 10.3233/JIFS-231412

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1167-1182, 2024

Authors: Fan, Jianping | Zhu, Qianwei | Wu, Meiqin

Article Type: Research Article

Abstract: Failure mode and effect analysis (FMEA) is an effective quality management tool used to improve product quality and reliability. However, with the application of FMEA, its shortcomings are exposed regarding risk assessment, weight determination, and failure mode risk prioritization. This paper proposes a new FMEA model using VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method based on the Interval-valued linguistic Z-numbers (IVLZNs). Specifically, IVLZNs and the Interval-valued linguistic Z-numbers weighted arithmetic averaging (IVLZNWAA) operator are used to evaluate and aggregate risk information of failure modes; the maximum deviation method is used to determine the weight of risk factors; the IVLZNs-VIKOR method …is used to determine the risk priority of failure modes. Then, a numerical example is given to verify the effectiveness of the proposed model. Finally, a comparative analysis is made to demonstrate the feasibility and rationality of the proposed method. Show more

Keywords: Interval-valued linguistic Z-numbers (IVLZNs), interval-valued linguistic Z-numbers weighted arithmetic averaging (IVLZNWAA) operator, failure mode and effect analysis (FMEA), VIKOR method

DOI: 10.3233/JIFS-231527

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1183-1199, 2024

Authors: Nguyen, Anh Tu | Bui, Thanh Lam | Bui, Huy Anh | Nguyen, Sy Tai | Nguyen, Xuan Thuan

Article Type: Research Article

Abstract: With the superior development of technology, mobile robots have become an essential part of humans’ daily life. Consequently, interacting and dealing with them pushes us to develop and propose different suitable Human-Robot Interaction (HRI) systems that can detect the interacted user’s actions and achieve the desired output in real-time. In this paper, we propose a closed-loop smart mechanism for two main agents: the hand gloves’ controller and the mobile robot. To be more specific, the developed model employs flex sensors to measure the curve of the finger. The sensor signals are then processed by aiding the Hedge Algebras Algorithm to …control the movement direction and customize the speed of the mobile robot via wireless communication. Numerical simulation and experiments demonstrate that the mobile robot could operate reliably, respond rapidly to control signals, and vary its speed continually based on the different finger gestures. Besides, the control results are also compared with those obtained from the traditional fuzzy controller to prove the superiority and efficiency of the proposed method. Show more

Keywords: Hedge algebras algorithm, hand gestures, mobile robot, fuzzy controller, wireless protocol

DOI: 10.3233/JIFS-232116

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1201-1212, 2024

Authors: Li, Jing | Jia, Bin | Fan, Jiulun | Yu, Haiyan | Hu, Yifan | Zhao, Feng

Article Type: Research Article

Abstract: The relative entropy fuzzy c-means (REFCM) clustering algorithm improves the robustness of the fuzzy c-means (FCM) algorithm against noise. However, its increased complexity results in slower convergence. To address this issue, we have proposed a suppressed REFCM (SREFCM) algorithm, in which a constant suppression rate, α, is selected. However, in cases where external factors, such as changes in the data structure, are present, relying on a fixed α value may result in a decline in algorithm performance, which is clearly unsuitable. Therefore, the adaptive selection of parameters is a critical step. Based on the data structure itself, this paper proposes …an algorithm for adaptive parameter selection utilizing partition entropy coefficient and alternating modified partition coefficient, and compares it to six parameter selection algorithms based on generalized rules: θ ′ type, ρ type, β type, τ type, σ type and ξ type. Empirical findings indicate that adapting parameters can enhance the partitioning capability of the algorithm while ensuring a rapid convergence rate. Show more

Keywords: Suppressed relative entropy fuzzy c-means clustering algorithm, suppression rate, partition entropy coefficient, alternating modified partition coefficient, adaptive parameter selection

DOI: 10.3233/JIFS-232999

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1213-1228, 2024

Authors: Tang, Shangjie | Zhong, Youkun

Article Type: Research Article

Abstract: The development of rural preschool education (RPE) is not only related to the healthy growth of rural preschool children, but also to social fairness and sustainable development. Therefore, the development of RPE not only involves the expansion of quantity, but also the improvement of its quality. At present, in China’s RPE, the determination of value goals There are still many obstacles in terms of source supply, institutional mechanism construction, development mode selection, and external environment construction, which make the high-quality development of RPE lack good internal motivation and external support. In view of this situation, some researchers have begun to …explore the high-quality and sustainable development of RPE differently. However, the high-quality development of RPE is a systematic reform project that needs to start from the present. From multiple perspectives such as reality and history, internal and external education, this paper examines the systematic and global nature of RPE reform and development. The development level evaluation of RPE is a MADM. In this paper, the generalized weighted Bonferroni mean (GWBM) decision operator and power average (PA) is designed to manage the MADM under single-valued neutrosophic sets (SVNSs). Then, the generalized single-valued neutrosophic number power WBM (GSVNNPWBM) decision operator is constructed and the MADM model are constructed based on GSVNNPWBM decision operator. Finally, a decision example for development level evaluation of RPE and some useful comparative studies were constructed to verify the GSVNNPWBM decision operator. Show more

Keywords: MADM, single-valued neutrosophic sets (SVNSs), GWBM operator, PA operator, development level evaluation

DOI: 10.3233/JIFS-233121

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1229-1244, 2024

Authors: Fu, Liping

Article Type: Research Article

Abstract: Today, information technology has penetrated into various fields of universities, and the development of information technology in teaching, scientific research, management, and services has become a catalyst for promoting changes in universities. In terms of teaching informatization, the Internet provides a powerful tool for knowledge dissemination and a huge platform for learning and communication between university teachers and students. Knowledge sharing has become easier, and the era of mutual interaction between teachers and students has arrived. University teachers need to quickly face this challenge, adapt to the new teaching and learning environment, improve their own literacy, enhance their information-based teaching …ability, change their teaching behavior, and thereby improve the quality of university education and meet the needs of society for talent cultivation. The informationization teaching ability evaluation of university teachers is a classical MAGDM problems. Recently, the Exponential TODIM(ExpTODIM) and (grey relational analysis) GRA method has been used to cope with MAGDM issues. The interval neutrosophic sets (INSs) are used as a tool for characterizing uncertain information during the informationization teaching ability evaluation of university teachers. In this manuscript, the interval neutrosophic number Exponential TODIM-GRA (INN-ExpTODIM-GRA) method is built to solve the MAGDM under INSs. In the end, a numerical case study for informationization teaching ability evaluation of university teachers is given to validate the proposed method. Show more

Keywords: Multiple attribute group decision making (MAGDM), interval neutrosophic sets (INSs), ExpTODIM, GRA, informationization teaching ability evaluation

DOI: 10.3233/JIFS-233192

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1245-1258, 2024

Authors: Kumar, Ajay | Singh, Anuj Kumar | Garg, Ankit

Article Type: Research Article

Abstract: This article has been retracted. A retraction notice can be found at https://doi.org/10.3233/JIFS-219433 .

DOI: 10.3233/JIFS-233443

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1259-1273, 2024

Authors: Jia, Xiaoying

Article Type: Research Article

Abstract: Under the premise of today’s socialist modernization construction, the development and progress of the country require more outstanding talents such as aspiring youth and intellectuals to participate, which puts forward higher requirements for education quality indicators and various aspects of operation. As the main institution and environment for implementing educational activities, the effectiveness of school management organization has a direct impact and even a decisive role on the quality of education. Therefore, how to improve the quality management of school education has become a hot topic in the education industry. The education quality management evaluation in higher education institutions is …viewed as the multiple-attribute decision-making (MADM) issue. In this paper, the interval-valued neutrosophic number cross-entropy (IVNN-CE) technique is built under interval-valued neutrosophic sets (IVNSs) based on the traditional cross-entropy technique. Then, combine traditional cross-entropy technique with IVNSs, the IVNN-CE technique is constructed for MADM under IVNSs. Finally, the numerical example for education quality management evaluation in higher education institutions was constructed and some comparisons is employed to verify advantages of IVNN-CE technique. The main contribution of this paper is constructed: (1) the cross-entropy model is extended to IVNSs; (1) the CRITIC technique is employed to construct the attribute weights under IVNSs; (3) the IVNN-CE technique is constructed to manage the MADM under IVNSs; (4) a case study about education quality management evaluation in higher education institutions is constructed to show the built technique; (5) some comparative algorithms are constructed to verify the rationality of IVNN-CE technique. Show more

Keywords: Multiple attribute decision making (MADM), interval-valued neutrosophic sets (IVNSs), cross-entropy technique, education quality management evaluation

DOI: 10.3233/JIFS-233481

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1275-1286, 2024

Authors: Liu, Yayun | Ning, Kuangfeng

Article Type: Research Article

Abstract: The adaptive fusion module with an attention mechanism functions by employing a dual-channel graph convolutional network to aggregate neighborhood information. The resulting embeddings are then utilized to calculate interaction terms, thereby incorporating additional information. To enhance the relevance of fusion information, an adaptive fusion module with an attention mechanism is constructed. This module selectively combines the neighborhood aggregation and interaction terms, prioritizing the most pertinent information. Through this adaptive fusion process, the algorithm effectively captures both neighborhood features and other nonlinear information, leading to improved overall performance. Neighborhood Aggregation Interaction Graph Convolutional Network Adaptive Fusion (NAIGCNAF) is a graph representation …learning algorithm designed to obtain low-dimensional node representations while preserving graph properties. It addresses the limitations of existing algorithms, which tend to focus solely on aggregating neighborhood features and overlook other nonlinear information. NAIGCNAF utilizes a dual-channel graph convolutional network for neighborhood aggregation and calculates interaction terms based on the resulting embeddings. Additionally, it incorporates an adaptive fusion module with an attention mechanism to enhance the relevance of fusion information. Extensive evaluations on three citation datasets demonstrate that NAIGCNAF outperforms other algorithms such as GCN, Neighborhood Aggregation, and AIR-GCN. NAIGCNAF achieves notable improvements in classification accuracy, ranging from 1.0 to 1.6 percentage points on the Cora dataset, 1.1 to 2.4 percentage points on the Citeseer dataset, and 0.3 to 0.9 percentage points on the Pubmed dataset. Moreover, in visualization tasks, NAIGCNAF exhibits clearer boundaries and stronger aggregation within clusters, enhancing its effectiveness. Additionally, the algorithm showcases faster convergence rates and smoother accuracy curves, further emphasizing its ability to improve benchmark algorithm performance. Show more

Keywords: Graph representation learning, graph convolutional neural network (GCNN), attention mechanism, node classification

DOI: 10.3233/JIFS-234086

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1287-1314, 2024

Authors: Lv, Jingjing

Article Type: Research Article

Abstract: This article has been retracted. A retraction notice can be found at https://doi.org/10.3233/JIFS-219433 .

DOI: 10.3233/JIFS-234212

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1315-1328, 2024

Authors: Jiang, Zhujun | Zhou, Jieyong | He, Qixiang

Article Type: Research Article

Abstract: Fuzzy singular Lyapunov matrix equations have many applications, but feasible numerical methods to solve them are absent. In this paper, we propose an efficient numerical method for fuzzy singular Lyapunov matrix equations, where A is crisp and semi-stable. In our method, we transform fuzzy singular Lyapunov matrix equation into two crisp Lyapunov matrix equations. Then we solve the least squares solutions of the two crisp Lyapunov matrix equations, respectively. The existence of fuzzy solution is also considered. At last, two small examples are presented to illustrate the validate of the method and two large scale examples that the existing method …fails to slove are presented to show the efficiency of the method. Show more

Keywords: Fuzzy, singular Lyapunov matrix equations, semi-stable, Extension method, the least squares solutions

DOI: 10.3233/JIFS-230990

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1329-1340, 2024

Authors: Geetha, M.P. | Karthika Renuka, D.

Article Type: Research Article

Abstract: A recommendation system serves as a distributed information filter, predicting customer preferences in reviews, ratings, and comments. Analysing customer behaviour aids in understanding needs and predicting intentions. E-commerce tracks product usage and sentiment to provide a personalized network based on consumer preference modelling. The challenge lies in optimizing item selection for suitable consumers to enhance performance. To address this, an imperative is the item recommendation approach for modelling future consumer behaviour. However, traditional machine learning methods often overlook dynamic product recommendations due to evolving user interests and changes in preferences reflected in customer ratings, causing cold-start issues. To overcome these …challenges, a comprehensive deep learning approach is introduced. This approach incorporates a deep neural network for consumer preference prediction, utilizing a multi-task learning paradigm to accommodate variations in consumer ratings. The research contribution lies in applying this network to predict consumer preference scores based on latent multimodal information and item characteristics. Initially, the architecture manages changing consumer aspects and preferences by extracting features and latent factors from customer review rating data. These latent factors include customer demographic information and other concealed features that signify preferences based on experiences and behaviours. Extracted latent features are processed using a sentiment analysis model to generate embedding latent features. A finely-tuned deep neural network with hyper-parameter adjustments serves as a prediction network, forming a customer performance-oriented recommendation system. It processes embedded latent features along with associated sentiments to achieve high prediction accuracy, reliability, and latency. The deep learning architecture, enriched with consumer-specific discriminative information, generates an objective function for item recommendations with minimal error, significantly enhancing predictive performance. Empirical experiments on Amazon review datasets validate the proposed model’s performance, showcasing its enhanced effectiveness and scalability in handling substantial data volumes. Show more

Keywords: Product recommendation, multitask learning, consumer buying behaviour analysis, user preference modelling

DOI: 10.3233/JIFS-231116

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1341-1357, 2024

Authors: Liu, Feng-Lang | Chien, Li-Chih | Chang, Ting-Yu | Ku, Cooper Cheng-Yuan | Chang, Ching-Ter

Article Type: Research Article

Abstract: Improving technological innovation (TI) capabilities is an integral component of government policies aimed at improving the competitiveness of small and medium enterprises (SMEs). This study aims to address implementation challenges arising from the use of Qualitative Forecasting Method (QFM) in new product development programs and proposes a novel method to aid decision makers (DMs) in their decision-making process. To tackle this issue, a hybrid method is proposed, incorporating Fuzzy Delphi method (FDM), Fuzzy Analytic Hierarchy Process (FAHP), Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS), and Multi-Choice Goal Programming with utility function (MCGP-U), while introducing prospect theory …as a novel approach. is proposed. The proposed method offers several advantages, including effective early planning, accurate identification of key success factors (KSFs), selection of the most suitable project leader, and estimation of the most reasonable resource investment, all of which are critical factors for success in TI for enterprises. The research results show that (1) the proposed method reduces project execution time by 20% compared to the original manual planning, (2) it facilitates the acquisition of KSFs using a rational approach to ensure project success, and (3) it increases the financial returns of the company by 17% compared to the company’s forecast. In summary, this paper makes a significant contribution to practical applications and additionally contributes to decision-making field by introducing prospect theory into the proposed hybrid method. Show more

Keywords: Technological innovation, decision-making model, fuzzy, MCGP

DOI: 10.3233/JIFS-234327

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1359-1378, 2024

Authors: Liu, Die | Xu, MengDie | Li, ZhiTing | He, Yingying | Zheng, Long | Xue, Pengpeng | Wu, Xiaodong

Article Type: Research Article

Abstract: Concrete surface crack detection plays a crucial role in ensuring concrete safety. However, manual crack detection is time-consuming, necessitating the development of an automatic method to streamline the process. Nonetheless, detecting concrete cracks automatically remains challenging due to the heterogeneous strength of cracks and the complex background. To address this issue, we propose a multi-scale residual encoding network for concrete crack segmentation. This network leverages the U-NET basic network structure to merge feature maps from different levels into low-level features, thus enhancing the utilization of predicted feature maps. The primary contribution of this research is the enhancement of the U-NET …coding network through the incorporation of a residual structure. This modification improves the coding network’s ability to extract features related to small cracks. Furthermore, an attention mechanism is utilized within the network to enhance the perceptual field information of the crack feature map. The integration of this mechanism enhances the accuracy of crack detection across various scales. Furthermore, we introduce a specially designed loss function tailored to crack datasets to tackle the problem of imbalanced positive and negative samples in concrete crack images caused by data imbalance. This loss function helps improve the prediction accuracy of crack pixels. To demonstrate the superiority and universality of our proposed method, we conducted a comparative evaluation against state-of-the-art edge detection and semantic segmentation methods using a standardized evaluation approach. Experimental results on the SDNET2018 dataset demonstrate the effectiveness of our method, achieving mIOU, F1-score, Precision, and Recall scores of 0.862, 0.941, 0.945, and 0.9394, respectively. Show more

Keywords: Crack segmentation, U-NET, residual structure, attention mechanism

DOI: 10.3233/JIFS-231736

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1379-1392, 2024

Authors: Zhang, Bin | Li, Jianqi | Li, Zewen | Sun, Jian | Xia, Yixiang | Zou, Pinlong

Article Type: Research Article

Abstract: The prediction of power demand for unmanned aerial vehicles (UAV) is an essential basis to ensure the rational distribution of the energy system and stable economic flight. In order to accurately predict the demand power of oil-electric hybrid UAV, a method based on variational mode decomposition (VMD) and Sparrow Search Algorithm (SSA) is proposed to optimize the hybrid prediction model composed of long-short term memory (LSTM) and Least Squares Support Vector Machine (LSSVM). Firstly, perform VMD decomposition on the raw demand power data and use the sample entropy method to classify the feature-distinct mode components into high-frequency and low-frequency categories. …Then, each modality component was separately input into the mixed model for rolling prediction. The LSSVM model and LSTM model were used to process low-frequency and high-frequency components, respectively. Finally, the predicted values for each modal component are linearly combined to obtain the final predicted value for power demand. Compared with the current models, the prediction model constructed in this paper stands out for its superior ability to track the changing trends of power demand and achieve the highest level of prediction accuracy. Show more

Keywords: UAV demand power, variational mode decomposition, sparrow search algorithm, long-short term memory, long-short term memory

DOI: 10.3233/JIFS-234263

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1393-1406, 2024

Authors: Hou, Junjian | Xu, Yaxiong | He, Wenbin | Zhong, Yudong | Zhao, Dengfeng | Zhou, Fang | Zhao, Mingyuan | Dong, Shesen

Article Type: Research Article

Abstract: Fatigue driving is one of the primary causative factors of road accidents. It is of great significance to discern, identify and warn drivers in time for traffic safety and reduce traffic accidents. In this paper, a systematic review for the fatigue driving behavior recognition method is developed to analyze its research status and development trends. Firstly, the data information and its application scenarios related to fatigue driving is detailed. Three driving behavior recognition methods based on different types of signal data are summarized and analyzed, and this signal data can be divided into physiological signal characteristics, visual signal characteristics, vehicle …sensor data characteristics and multi-data information fusion. By summarizing and comparing the recognition effect of existing fatigue driving recognition methods, combined with deep learning technology, the paper concludes the fatigue driving behavior recognition method based on single data source has some shortcomings such as low accuracy and easy to be affected by external factors, but the recognition method based on multi-feature information fusion can achieve a exhilarated recognition result. Finally, some prospects are given to analyze the development trend of fatigue driving behavior recognition in the future. Show more

Keywords: Fatigue driving, information fusion, physiological signals, deep learning, vehicle sensors

DOI: 10.3233/JIFS-235075

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1407-1427, 2024

Authors: Venkataramanan, K. | Arun, M. | Jha, Shankaranand | Sharma, Aditi

Article Type: Research Article

Abstract: This study delves into the development and analysis of a novel Embedded Fuzzy Type 2 PID Controller for Robot Manipulators, motivated by the increasing need for enhanced control systems in robotic applications to improve precision and stability. In the background section, the limitations of conventional PID controllers in addressing uncertainties and disturbances, especially in complex tasks performed by robot manipulators, are presented. The concept of fuzzy logic and the Type 2 fuzzy system is introduced, highlighting their potential to manage imprecise and uncertain information. Through rigorous analysis and simulation, the superior performance of the Embedded Fuzzy Type 2 PID Controller …is demonstrated when compared to traditional PID controllers and even Type 1 fuzzy controllers. The results showcase enhanced tracking accuracy, disturbance rejection, and adaptability, making it a promising solution for advanced robotic applications. In conclusion, this research provides a robust solution for improving the control of robot manipulators in uncertain and dynamic environments. The Embedded Fuzzy Type 2 PID Controller offers a new paradigm in control theory, ensuring stability and precision even in the face of unpredictable factors. This innovation holds great promise for advancing the capabilities of robotic systems and underlines the potential for further research in embedded fuzzy control systems. Show more

Keywords: Fuzzy type 2 PID controller, robot manipulator, embedded control, stability analysis, precision control

DOI: 10.3233/JIFS-235338

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1429-1442, 2024

Authors: Peng, Bo | Zhang, Tao | Han, Kundong | Zhang, Zhe | Ma, Yuquan | Ma, Mengnan

Article Type: Research Article

Abstract: Text classification is an important tasks in natural language processing. Multilayer attention networks have achieved excellent performance in text classification tasks, but they also face challenges such as high temporal and spatial complexity levels and low-rank bottleneck problems. This paper incorporates spatial attention into a neural network architecture that utilizes fewer encoder layers. The proposed model aims to enhance the spatial information of semantic features while addressing the high temporal and spatial demands of traditional multilayer attention networks. This approach utilizes spatial attention to selectively weigh the relevance of the spatial locations in the input feature maps, thereby enabling the …model to focus on the most informative regions while ignoring the less important regions. By incorporating spatial attention into a shallower encoder network, the proposed model achieves improved performance on spatially oriented tasks while reducing the computational overhead associated with deeper attention-based models. To alleviate the low-rank bottleneck problem of multihead attention, this paper proposes a variable multihead attention mechanism, which changes the number of attention heads in a layer-by-layer manner with the encoder, achieving a balance between expression power and computational efficiency. We use two Chinese text classification datasets and an English sentiment classification dataset to verify the effectiveness of the proposed model. Show more

Keywords: Text classification, BERT, Spatial attention, Multihead attention mechanism

DOI: 10.3233/JIFS-231368

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1443-1454, 2024

Authors: Sun, Xu | Zou, Qingyu

Article Type: Research Article

Abstract: Modern information technology has been constantly evolving, transforming the traditional power grid into a network that couples both power and information layers. Understanding the cascade failure behavior of such power communication interdependent networks is essential for effectively controlling catastrophic network failures, preventing system collapse, and ensuring normal network operation. This research can contribute to the development of tools to predict and prevent such failures, and restore normal network functions in a timely manner. This paper focuses on the modeling method and cascading fault analysis of the power-information double-layer coupling network. We construct power information interdependent networks based on IEEE30 system …and England39 system, and evaluate the cascade failure results using load distribution cascade failure model and HITS algorithm. The evaluation criteria include network efficiency, residual network size, and residual network load. By analyzing these parameters, we can gain insights into the performance of the power-information interdependent networks during cascade failures. Through simulation results, we demonstrate that the type i attack proposed in this paper renders the network structure unstable and less robust compared to the degree attack, intermediate attack, and random attack. These findings provide valuable references for developing strategies to mitigate the cascading failure of power-information interdependent networks. Show more

Keywords: Power network, information network, interdependent network, cascade failure, critical nodes

DOI: 10.3233/JIFS-232016

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1455-1467, 2024

Authors: Li, Wenying | Guo, Qinghong | Wen, Ming | Zhang, Yun | Pan, Xin | Xiao, Zhenfeng | Yang, Shuzhi

Article Type: Research Article

Abstract: This research proposes a dynamic reconfiguration model (DRM) and method for the distribution network, considering wind power, photovoltaic distributed generation (DG), and demand-side response. The reconfiguration goal is to minimize the total operating cost of the distribution network. The electricity purchase costs, DG operation costs, participation in demand response programs, network losses, and voltage deviations are selected to construct the optimization function. The DRM is established by clustered load data segments. An improved backtracking search algorithm incorporating a differential evolution learning strategy and adaptive chaotic elite search strategy is adopted to solve the DRM. The viability of the proposed method …is validated by an IEEE 30-node simulation distributed system. Show more

Keywords: Active distribution network, distributed power sources, demand-side response, dynamic reconfiguration, backtracking search algorithm

DOI: 10.3233/JIFS-232993

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1469-1480, 2024

Authors: Amsaprabhaa, M.

Article Type: Research Article

Abstract: Vision-based Human Activity Recognition (HAR) is a challenging research task in sports. This paper aims to track the player’s movements and recognize the different types of sports activities in videos. The proposed work aims in developing Hybrid Optimized Multimodal SpatioTemporal Feature Fusion (HOM-STFF) model using skeletal information for vision-based sports activity recognition. The proposed HOM-STFF model presents a deep multimodal feature fusion approach that combines the features that are generated from the multichannel-1DCNN and 2D-CNN network model using a concatenative feature fusion process. The fused features are fed into the 2-GRU model that generates temporal features for activity recognition. Nature-inspired …Bald Eagle Search Optimizer (BESO) is applied to optimize the network weights during training. Finally, performance of the classification model is evaluated and compared for identifying different activities in sports videos. Experimentation was carried out with the three vision-based sports datasets namely, Sports Videos in the Wild (SVW), UCF50 sports action and Self-build dataset, which achieved accuracy rate of 0.9813, 0.9506 and 0.9733, respectively. The results indicate that the proposed HOM-STFF model outperforms the other state-of-the-art methods in terms of activity detection capability. Show more

Keywords: Bald eagle search optimizer, Gated recurrent unit, human activity recognition, multichannel-1DCNN, 2D-CNN

DOI: 10.3233/JIFS-233498

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1481-1501, 2024

Authors: Sun, Xianshan | Sheng, Yuefeng | Mao, Hongfei | Qian, Qingfeng | Cai, Qingnan

Article Type: Research Article

Abstract: In order to solve the problems of tedious, insufficient manpower, low efficiency, and easy to cause human errors in the verification of relay protection equipment settings with the development of the power grid, an automatic verification method of relay protection equipment settings combining cell image gray enhancement and AI recognition is studied. In this method, Gaussian mixture and particle swarm algorithm are used to enhance the gray level of the original image captured, and the binary method is used to further denoise the image; The histogram is used to segment the cells in the denoised constant value image one by …one; The OCR technology in AI technology uses the maximum width backtracking segmentation algorithm to segment a coherent text in a cell into multiple single words, and collects the 13 dimensional characteristics of the text to be detected to compare with the text in the database. The text with the smallest error is the detected text, which completes the text extraction in the cell; Store the extracted text data in the database, check the data in the notification constant value sheet and the device constant value sheet, and give an abnormal prompt of different data. The experimental results show that the image pre processed by this method is clear, the fixed value single cell segmentation is accurate, and the OCR text extraction efficiency is high. Through a large number of data experiments, the final verification accuracy can reach 99.8%. Show more

Keywords: Gray enhancement, OCR text extraction, cell segmentation, equipment constant value sheet, notify the fixed value sheet, automatic detection

DOI: 10.3233/JIFS-234457

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1503-1515, 2024

Authors: Yang, Huailei

Article Type: Research Article

Abstract: The grid connected inverter is the core component of the photovoltaic grid connected power generation system, which mainly converts the direct current of the photovoltaic matrix into alternating current that meets the grid connected requirements, playing a key role in the efficient and stable operation of the photovoltaic grid connected power generation system.This paper uses fuzzy PI control model which to improve the performance of intelligent photovoltaic grid-connected inverter to simulate the intelligent photovoltaic inverter system, using mathematical analysis and reasoning methods for model analysis,adopts two-stage three-phase LCL grid-connected inverter, establishes mathematical models in two-phase synchronous rotating and two-phase static …coordinate systems, and adopts an active damping strategy based on grid-connected current. Based on existing research and empirical analysis,aiming at the disadvantage of poor dynamic response of repetitive control, an improved repetitive control strategy is adopted, and the controller is analyzed from two aspects of stability and dynamic performance, and the simulation model of photovoltaic grid-connected power generation system is built. Use experimental analysis method to verify the effectiveness of the model in this article,The experimental results show that the simulation system of intelligent photovoltaic grid-connected inverter considering fuzzy PI control proposed in this paper has certain effects. Show more

Keywords: Fuzzy PI control, intelligence, photovoltaic, grid connection, inverter

DOI: 10.3233/JIFS-234491

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1517-1529, 2024

Authors: Li, Yunzhi | Lei, Jingsheng | Shi, Wenbin | Yang, Shengying

Article Type: Research Article

Abstract: PCB defect detection aims to identify the presence of gaps, open circuits, short circuits, and other defects in the PCB boards produced in the industry. Designing effective deep learning algorithms is crucial to finding a solution. Previously proposed PCB defect detection algorithms are limited in detecting tiny objects in high-density. Directly applying previous models to tackle PCB defect detection tasks will cause serious issues, such as missed detection and false detection. In this paper, we present a detection algorithm for tiny PCB defect targets in high-density regions to solve the above-mentioned problems. We firstly propose a detection head to detect …tiny objects. Then, we design a four-channel feature fusion mechanism to fuse four different scale features and add an attention mechanism to find the attention region in scenarios with dense objects. Finally, we achieved accurate detection of tiny targets in high-density areas. Experiments were performed on the publicly available PCB defect dataset from Peking University. Our [email protected]:.95 achieves 48.6%, while [email protected] exceeds 90%. Compared with YOLOX and YOLOv5, our improved model can better localize tiny objects in high-density scenes. The experimental results certify that our model can obtain higher performance in comparison with the baseline and the state of the art. Show more

Keywords: defect detection, tiny objects, high density, detection head, feature fusion, print circuit board

DOI: 10.3233/JIFS-230150

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1531-1541, 2024

Authors: Pashikanti, Rajesh | Patil, C.Y. | Shinde, Amita

Article Type: Research Article

Abstract: Arrhythmia is the medical term for any irregularities in the normal functioning of the heart. Due to their ease of use and non-invasive nature, electrocardiograms (ECGs) are frequently used to identify heart problems. Analyzing a huge number of ECG data manually by medical professionals uses excessive medical resources. Consequently, identifying ECG characteristics based on machine learning has become increasingly popular. However, these conventional methods have some limitations, including the need for manual feature recognition, complex models, and lengthy training periods. This research offers a unique hybrid POA-F3DCNN method for arrhythmia classification that combines the Pelican Optimisation algorithm with fuzzy-based 3D-CNN …(F3DCNN) to alleviate the shortcomings of the existing methods. The POA is applied to hyper-tune the parameters of 3DCNN and determine the ideal parameters of the Gaussian Membership Functions used for FLSs. The experimental results were obtained by testing the performance of five and thirteen categories of arrhythmia classification, respectively, on UCI-arrhythmia and the MIT-BIH Arrhythmia datasets. Standard measures such as F1-score, Precision, Accuracy, Specificity, and Recall enabled the classification results to be expressed appropriately. The outcomes of the novel framework achieved testing average accuracies after ten-fold cross-validation are 98.96 % on the MIT-BIH dataset and 99.4% on the UCI arrhythmia datasets compared to state-of-the-art approaches. Show more

Keywords: Deep learning, optimization algorithm, ECG classification, cardiac arrhythmia, feature extraction, 3D-CNN, Pelican optimization algorithm

DOI: 10.3233/JIFS-230359

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1543-1566, 2024

Authors: Saranya, D. | Bharathi, A.

Article Type: Research Article

Abstract: The interpretation of the electroencephalogram (EEG) signal is one method that can be utilized to diagnose epilepsy, which is one of the most prevalent brain illnesses. The length of an EEG signal is typically quite long, making it difficult to interpret manually. Extreme Learning Machine (ELM) is used to detection of Epilepsy and Seizure. But in ELM Storage space and training time is high. In order to reduce training time and storage space African Buffalo Optimization (ABO) algorithm is used. ABO is combined with Sparse ELM to improve the speed, accuracy of detection and reduce the storage space. First, Wavelet …transform is used to extract relevant features. Due to their high dimensionality, these features are then reduced by using linear discriminant analysis (LDA). The proposed Hybrid Sparse ELM technique is successfully implemented for diagnosing epileptic seizure disease. For classification, the Sparse ELM-ABO classifier is applied to the UCI Epileptic Seizure Recognition Data Set training dataset, and the experimental findings are compared to those of the SVM, Sparse ELM, and ELM classifiers applied to the same database. The proposed model was tested in two scenarios: binary classification and multi-label classification. Seizure identification is the only factor in binary classification. Seizure and epilepsy identification are part of multi-label classification. It is observed that the proposed method obtained high accuracy in classification with less execution time along with performance evaluation of parameters such as prediction accuracy, specificity, precision, recall and F-score. Binary classification scores 96.08%, while multi-label classification achieves 90.89%. Show more

Keywords: Extreme learning machine, african buffalo optimization, epilepsy and seizure detection, sigmoid activation, cost function optimization

DOI: 10.3233/JIFS-237054

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1567-1582, 2024

Authors: Tan, Guimei | Yu, Yuehai | Yu, Xichang

Article Type: Research Article

Abstract: Due to the complexity of the real world, randomness and uncertainty are ubiquitous and interconnected in the real world. In order to measure the research objects that contain both randomness and uncertainty in practical problems, and extend the entropy theory of uncertain random variables, this paper introduces the arc entropy of uncertain random variables and the arc entropy of their functions. On this basis, the mathematical properties of arc entropy and two key formulas for calculating arc entropy are also studied and derived. Finally, two types of the mean variance entropy model with the risk and diversification are established, and …the corresponding applications to rare book selection for the rare book market are also introduced. Show more

Keywords: Uncertainty theory, chance theory, uncertain random variable, arc entropy

DOI: 10.3233/JIFS-230995

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1583-1595, 2024

Authors: Nandhini, S.S. | Kannimuthu, S.

Article Type: Research Article

Abstract: It is obvious that the problem of Frequent Itemset Mining (FIM) is very popular in data mining, which generates frequent itemsets from a transaction database. An extension of the frequent itemset mining is High Utility Itemset Mining (HUIM) which identifies itemsets with high utility from the transaction database. This gains popularity in data mining, because it identifies itemsets which have more value but the same was not identified as frequent by Frequent Itemset Mining. HUIM is generally referred to as Utility Mining. The utility of the items is measured based on parameters like cost, profit, quantity or any other measures …preferred by the users. Compared to high utility itemsets (HUIs) mining, high average utility itemsets (HAUIs) mining is more precise by considering the number of items in the itemsets. In state-of-the-art algorithms that mines HUIS and HAUIs use a single fixed minimum utility threshold based on which HAUIs are identified. In this paper, the proposed algorithm mines HAUIs from transaction databases using Artificial Fish Swarm Algorithm (AFSA) with computed multiple minimum average utility thresholds. Computing the minimum average utility threshold for each item with the AFSA algorithm outperforms other state-of-the-art HAUI mining algorithms with multiple minimum utility thresholds and user-defined single minimum threshold in terms of number of HAUIs. It is observed that the proposed algorithm outperforms well in terms of execution time, number of candidates generated and memory consumption when compared to the state-of-the-art algorithms. Show more

Keywords: Artificial fish swarm algorithm, data mining, frequent itemset mining, high average utility itemsets, itemset mining, utility mining

DOI: 10.3233/JIFS-231852

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1597-1613, 2024

Authors: Kumari, Ankita | Dutta, Sandip | Chakraborty, Soubhik

Article Type: Research Article

Abstract: M obile A d-Hoc Net works (MANET) are considered one of the significant and growing areas in today’s scenario of technological advancement. It is an infrastructure-less and dynamic ad-hoc network that requires a connection between nodes to deliver packets and data. However, its design adopts a connection-less approach, at the helm of which no monitoring node exists. Hence, the threat of maintaining the network’s security remains an uphill task. Many attacks have been attempted to breach the protection of the MANET. This paper discusses one of the most potent attacks in a MANET infrastructure, the Sinkhole Attack . We try …to minimize the possibility of a sinkhole attack using a Fuzzy Q-learning- based approach, a reinforcement learning technique. The results are encouraging, suggesting that sinkhole attacks can be minimized to a great extent after the adaption of the proposed approach. Show more

Keywords: Sinkhole attack, MANET, fuzzy Q –learning, security, cryptography

DOI: 10.3233/JIFS-232003

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1615-1626, 2024

Authors: Arif, Waqar | Khan, Waheed Ahmad | Khan, Asghar | Mahmood, Tariq | Rashmanlou, Hossein

Article Type: Research Article

Abstract: In this manuscript, we develop TOPSIS (Technique for order of preference by similarity to ideal solution) method in the setting of bipolar fuzzy environment which has the ability to deal the data while keeping in view the positive and negative aspects. By using bipolar fuzzy sets, we establish the novel concept of rating the numerous preferences of any object described through the connection number(CN) of set pair analysis(SPA). In this regard, we extend the TOPSIS method based on the connection number(CN) of set pair analysis(SPA) in the frame of bipolar fuzzy sets. For the sake of verification, effectiveness and superiority …of our method, we conduct the comparative study of some real life problem related to decision making theory. Moreover, we observe that our proposed method also fulfills the existing test criterions. Show more

Keywords: BFSs, SPA, CN, TOPSIS

DOI: 10.3233/JIFS-232838

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1627-1635, 2024

Authors: Yin, Liru | Yang, Zhiwei

Article Type: Research Article

Abstract: When the traditional evolution model studies the regional distribution of agricultural parks, the relationship between regions is not clear enough, which leads to the lack of generality of regional distribution. In order to solve this problem, this study adopts the methods of topological division and cluster analysis, establishes the model of regional diversity and evolution of farms, and clusters the spatial information of agricultural parks. According to the feature factors, the images are classified, and the image dimension values are reduced. The data space is divided into cellular space by the method of network topology structure division, and the effective …coefficient of each cell is calculated, and the spatial structure and characteristics of agricultural parks are extracted to reveal the similarities and differences between different parks. The experimental results show that the evolution model of agricultural parks constructed by topological division and clustering method shows obvious clustering characteristics in space, and the relationships among the factors are good. It is proved that the model can describe the spatial differences and evolution trends of agricultural parks more accurately, so as to provide more targeted suggestions for the planning, management and sustainable development of agricultural parks. Show more

Keywords: Network partition, cluster method, agricultural park, regional difference, evolutionary model, collaborative

DOI: 10.3233/JIFS-234165

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1637-1645, 2024

Authors: Zhu, Yimin | Gao, Qing | Shi, Hongyan | Liu, Jinguo

Article Type: Research Article

Abstract: Gestures have long been recognized as an interaction technique that can provide a more natural, creative, and intuitive way to communicate with computers. However, some existing difficulties include the high probability that the same type of movement done at different speeds will be recognized as a different category of movement; cluttered, occluded, and low-resolution backgrounds; and the near-impossibility of fusing different types of features. To this end, we propose a novel framework for integrating different scales of RGB and motion skeletons to obtain higher recognition accuracy using multiple features. Specifically, we provide a network architecture that combines a three-dimensional convolutional …neural network (3DCNN) and post-fusion to better embed different features. Also, we combine RGB and motion skeleton information at different scales to mitigate speed and background issues. Experiments on several gesture recognition public datasets show desirable results, validating the superiority of the proposed gesture recognition method. Finally, we do a human-computer interaction experiment to prove its practicality. Show more

Keywords: Multi-modal action recognition, body action, robot simulation

DOI: 10.3233/JIFS-234791

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1647-1661, 2024

Authors: Jia, Wanjun | Li, Changyong

Article Type: Research Article

Abstract: This study proposes a method to help people with different degrees of hearing impairment to better integrate into society and perform more convenient human-to-human and human-to-robot sign language interaction through computer vision. Traditional sign language recognition methods make it challenging to get good results on scenes with backgrounds close to skin color, background clutter, and partial occlusion. In order to realize faster real-time display, by comparing standard single-target recognition algorithms, we choose the best effect YOLOv8 model, and based on this, we propose a lighter and more accurate SLR-YOLO network model that improves YOLOv8. Firstly, the SPPF module is replaced …with RFB module in the backbone network to enhance the feature extraction capability of the network; secondly, in the neck, BiFPN is used to enhance the feature fusion of the network, and the Ghost module is added to make the network lighter; lastly, in order to introduce partial masking during the training process and to improve the data generalization capability, Mixup, Random Erasing and Cutout three data enhancement methods are compared, and finally the Cutout method is selected. The accuracy of the improved SLR-YOLO model on the validation sets of the American Sign Language Letters Dataset and Bengali Sign Language Alphabet Dataset is 90.6% and 98.5%, respectively. Compared with the performance of the original YOLOv8, the accuracy of both is improved by 1.3 percentage points, the amount of parameters is reduced by 11.31%, and FLOPs are reduced by 11.58%. Show more

Keywords: Machine vision, sign language recognition, YOLO, deep learning, lightweight

DOI: 10.3233/JIFS-235132

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1663-1680, 2024

Authors: Sun, Qiong | Sun, Yu | Jiang, Jingjing

Article Type: Research Article

Abstract: As an important choice of strategic transformation of energy enterprises, digital transformation has a profound impact on the stock price fluctuation of enterprises. From the perspective of dynamic capacity and environmental regulation, analyzes influences of digital transformation upon energy companies’ share movement volatility, constructs a theoretical model that considers digital transformation and stock price volatility as the primary effects, dynamic capabilities as the mediator, and environmental regulation as the moderator. In addition, the study employs data from China’s A-share listed energy enterprises from 2013 to 2020, utilizing a fixed-effect model to perform an empirical test. The findings demonstrate a significant …positive correlation between the digital transformation of energy enterprises and the volatility of stock prices, indicating that the greater the extent of digital transformation, the higher the volatility of enterprise stock prices. Among the dimensions of dynamic capability, only adaptability and innovation ability appears to mediate the relation between digital transformation and stock price fluctuation. Moreover, environmental regulation positively moderates the relationship between digital transformation and the learning ability dimension. Finally, from the macro and micro levels, this study puts forward the policies and supportive measures to stabilize the stock price of energy enterprises, and suggestions on how to implement the digital transformation strategy reasonably according to their own development status and characteristics to provide valuable insights for encouraging the digital transformation among energy firms. Show more

Keywords: Energy enterprises, digital transformation, dynamic capability, stock price fluctuation, environmental regulation

DOI: 10.3233/JIFS-232161

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1681-1695, 2024

Authors: Sumathi, S. | Balaji Ganesh, A.

Article Type: Research Article

Abstract: Arrhythmia disorders are the leading cause of death worldwide and are primarily recognized by the patient’s irregular cardiac rhythms. Wearable Internet of Things (IoT) devices can reliably measure patients’ heart rhythms by producing electrocardiogram (ECG) signals. Due to their non-invasive nature, ECG signals have been frequently employed to detect arrhythmias. The manual procedure, however, takes a long time and is prone to error. Utilizing deep learning models for early automatic identification of cardiac arrhythmias is a preferable approach that will improve diagnosis and therapy. Though ECG analysis using cloud-based methods can perform satisfactorily, they still suffer from security issues. It …is essential to provide secure data transmission and storage for IoT medical data because of its significant development in the healthcare system. So, this paper proposes a secure arrhythmia classification system with the help of effective encryption and a deep learning (DL) system. The proposed method mainly involved two phases: ECG signal transmission and arrhythmia disease classification. In the ECG signal transmission phase, the patient’s ECG data collected through the IoT sensors is encrypted using the optimal key-based elgamal elliptic curve cryptography (OKEGECC) mechanism, and the encrypted data is securely transmitted to the cloud. After that, in the arrhythmia disease classification phase, the system collects the data from the Massachusetts Institute of Technology-Beth Israel Hospital (MIT-BIH) database to perform training. The collected data is preprocessed by applying the continuous wavelet transform (CWT) to improve the quality of the ECG data. Next, the feature extraction is carried out by deformable attention-centered residual network 50 (DARNet-50), and finally, the classification is performed using butterfly-optimized Bi-directional long short-term memory (BOBLSTM). The experimental outcomes showed that the proposed system achieves 99.76% accuracy, which is better than the existing related schemes. Show more

Keywords: Internet of things, electrocardiogram, data security, arrhythmia disease classification, machine learning

DOI: 10.3233/JIFS-235885

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1697-1712, 2024

Authors: Zheng, Lina | Chen, Lijun | Wang, Yini

Article Type: Research Article

Abstract: Information amount has been shown to be one of the most efficient methods for measuring uncertainty. However, there has been little research on outlier detection using information amount. To fill this void, this paper provides a new unsupervised outlier detection method based on the amount of information. First, the information amount in a given information system is determined, which offers a thorough estimate of the uncertainty of this information system. Then, the relative information amount and the relative cardinality are proposed. Following that, the degree of outlierness and weight function are shown. Furthermore, the information amount-based outlier factor is constructed, …which determines whether an object is an outlier by its rank. Finally, a new unsupervised outlier detection method called the information amount-based outlier factor (IAOF) is developed. To validate the effectiveness and advantages of IAOF, it is compared to five existing outlier identification methods. The experimental results on real-world data sets show that this method is capable of addressing the problem of outlier detection in categorical information systems. Show more

Keywords: Outlier detection, CIS, Information amount, IAOF

DOI: 10.3233/JIFS-236518

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1713-1734, 2024

Authors: Paul, Milner | Adhikari, Shuma | Singh, Loitongbam Surajkumar | Parekkattil, Adarsh V. | Athappilly, George

Article Type: Research Article

Abstract: This article has been retracted. A retraction notice can be found at https://doi.org/10.3233/JIFS-219433 .

DOI: 10.3233/JIFS-236583

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1735-1752, 2024

Authors: Chen, Tianwen | Zhou, Ronghu | Chen, Haoliang | Liu, Changqing

Article Type: Research Article

Abstract: The main purpose of this paper is to study the coordination, price and sales effort decisions of a dual channel supply chain under live streaming commerce mode. In nowadays’ e-commerce age, more and more people have interest in live streaming especially after the outbreak of COVID-19, but the research on live streaming supply chain is lacking. To fill this gap, a supply chain composed of a manufacturer and an internet celebrity is established, in which the demand is affected by the internet celebrity’s sales effort and personal influence. Considering different power structures of the supply chain, price and sales effort …decisions are studied in four models: Nash, manufacturer dominant (MD), internet celebrity dominant (KD) and cooperative game models. Subsequently, the feasible region of bargaining game is discussed in terms to share the extra profits and coordinate the supply chain. The manufacturer and the internet celebrity can be coordinated through bargaining problem in the cooperation model, and the extra profits sharing ratio is depend on each other’s bargaining power. Numerical analysis is further provided to test the propositions and show the impacts of market share rate, internet celebrity’s commission rate and personal influence on supply chain’s performance. Show more

Keywords: Supply chain, live E-commerce, internet celebrity, sales effort, personal influence

DOI: 10.3233/JIFS-231500

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1753-1769, 2024

Authors: He, Yu | Pan, Yigong | Hu, Xinying | Sun, Guangzhong

Article Type: Research Article

Abstract:  Concept prerequisite relation refers to the learning order of concepts, which is useful in education. Concept prerequisite learning refers to using machine learning methods to infer prerequisite relation of a concept pair. The process of concept prerequisite learning requires large amounts of labeled data to train classifier. Usually, the labels of prerequisite relation are assigned by specialists. The specialist labelling method is costly. Thus, it is necessary to reduce labeling expense. An effective strategy is using active learning methods. In this paper, we propose a pool-based active learning framework for concept prerequisite learning named PACOL. It is a …fact that concept u and concept v cannot be prerequisite of each other simultaneously. The idea of PACOL is to select the concept pair with the greatest deviation between the classifier’s prediction and the fact. Besides, PACOL can be used in two situations: when specialists assign three kinds of labels or two kinds of labels. In experiments, we constructed data sets for three subjects. Experimental results on both our constructed data sets and public data sets demonstrate that PACOL outperforms than existing active learning methods in all situations. Show more

Keywords: Educational data mining, prerequisite relation, active learning, Wikipedia

DOI: 10.3233/JIFS-231878

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1771-1787, 2024

Authors: Naveen, Palanichamy | NithyaSai, S. | Udayamoorthy, Venkateshkumar | Ashok kumar, S.R.

Article Type: Research Article

Abstract: In the current industry, quality inspection in semiconductor manufacturing is of immense significance. Significant achievements have been made in fault diagnosis in fabricated semiconductor wafer manufacturing due to the development of machine learning. Since real-time intermediate signals are non-linear and time-varying, the signals undergo various distortions due to changes in equipment, material, and process. This leads to a drastic change in information in intermediate signals. This paper presents a fault diagnosis model for semiconductor manufacturing processes using a generative adversarial network (GAN). The study aims to address the challenges associated with efficient and accurate fault identification in these complex processes. …Our approach involves the extraction of relevant components, development of a paired generator model, and implementation of a deep convolutional neural network. Experimental evaluations were conducted using a comprehensive dataset and compared against six existing models. The results demonstrate the superiority of our proposed model, showcasing higher accuracy, specificity, and sensitivity across various shift tasks. This research contributes to the field by introducing a novel approach for fault diagnosis, paving the way for improved process control and product quality in semiconductor manufacturing. Future work will focus on further optimizing the model and extending its applicability to other manufacturing domains. Show more

Keywords: Semiconductor manufacturing, GAN, fault diagnosis, quality inspection, wafer fabrication, deep CNN

DOI: 10.3233/JIFS-231948

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1789-1800, 2024

Authors: Pitchandi@Sankaralingam, R. | Arunachalaperumal, C. | Mary Anita, E.A.

Article Type: Research Article

Abstract: Source Location Privacy (SLP) in Wireless Sensor Networks (WSNs) refers to a set of techniques and strategies used to safeguard the anonymity and confidentiality of the locations of sensor nodes (SNs) that are the source of transmitted data within the network. This protection is important in different WSN application areas like environmental monitoring, surveillance, and healthcare systems, where the revelation of the accurate location of SNs can pose security and privacy risks. Therefore, this study presents metaheuristics with sequential assignment routing based false packet forwarding scheme (MSAR-FPFS) for source location privacy protection (SLPP) on WSN. The contributions of the MSAR-FPFS …method revolve around enhancing SLP protection in WSNs through the introduction of dual-routing, SAR technique with phantom nodes (PNs), and an optimization algorithm. In the presented MSAR-FPFS method, PNs are used for the rotation of dummy packets using the SAR technique, which helps to prevent the adversary from original data transmission. Next, the MSAR-FPFS technique uses an improved reptile search algorithm (IRSA) for the optimal selection of routes for real packet transmission. Moreover, the IRSA technique computes a fitness function (FF) comprising three parameters namely residual energy (RE), distance to BS (DBS), and node degree (ND). The experimental evaluation of the MSAR-FPFS system was investigated under different factors and the outputs show the promising achievement of the MSAR-FPFS system compared to other existing models. Show more

Keywords: Wireless sensor networks, metaheuristics, source location privacy preserving, fitness function, routing, false data forwarding

DOI: 10.3233/JIFS-233541

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1801-1812, 2024

Authors: Zhou, Bolong | Yu, Menghong | Guo, Jie

Article Type: Research Article

Abstract: Trailing suction hopper dredger is a kind of hydraulic dredger, it has the characteristics of self-propelled, selfloading, self-dredging, self-unloading, it is the main force in dredging and blowing works, it is widely used in the world, it can be said that where there is a big dredging project where there is a trailing suction hopper dredger’s figure. The loading optimization process of trailing suction hopper dredger contains a lot of dredging parameters related to soil type, and the soil type under different working conditions is not very clear. In this study, we present a hybrid optimization technique based on simulated …annealing and multi-population genetic algorithm to enhance the loading efficiency of a trailing suction hopper dredger and to examine the variation of dredged soil parameters. The soil parameters of the spoil hopper deposition model were estimated using this hybrid optimization algorithm. The experimental results show that the soil parameters are successfully estimated and verified by our measured construction data of a trailing suction hopper dredger. In addition, our proposed method has the highest accuracy of soil parameter estimation, the fastest algorithm convergence, and excellent robustness compared to the other three intelligent optimization methods. In addition, our method successfully avoids the phenomenon of premature convergence that usually occurs in traditional genetic algorithms, and the parameters show strong adaptability to different vessels under the same dredging area. Show more

Keywords: Trailing suction hopper dredger, spoil hopper deposition model, simulated annealing and multi-population genetic algorithm, soil parameters estimation

DOI: 10.3233/JIFS-233959

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1813-1831, 2024

Authors: Li, Xingge | Zhang, Shufeng | Chen, Xun | Wang, Yashun | Fan, Zhengwei

Article Type: Research Article

Abstract: The proliferation of artificial intelligence (AI) devices has generated an increasing demand for reliability in their utilization. Nevertheless, the significant concern persists regarding the absence of suitable assessment and testing techniques to evaluate the performance of these intelligent systems in real-world conditions. In response to these issues, this paper conducts research on the reliability testing and assessment of AI visual perception systems under vibration stress. The paper introduces the working mechanism of the visual perception system and the various testing methods for AI devices. Based on this, a reliability assessment method for intelligent devices is proposed, which uses the Fréchet …distance as the measurement function and environmental adaptability as the reliability metric. Additionally, a vibration test platform for the visual perception system is established, which offers a cost-effective and reliable solution to the high cost issue of field testing for AI devices. Finally, the reliability level of the visual perception system under various vibration conditions is tested through vibration testing. The research findings indicate that the reliability of AI models decreases as the degradation caused by vibration increases, following a normal distribution. Show more

Keywords: Reliability, fréchet distance (FD), visual perception system (VPS), environmental adaptability, vibration test

DOI: 10.3233/JIFS-234179

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1833-1852, 2024

Authors: Wang, Feng

Article Type: Research Article

Abstract: A real-time sharing model of energy big data based on end cloud collaboration technology is built to safely and efficiently share energy big data in all fields. Through the collaboration between the client layer and the cloud platform layer in the end cloud collaboration module, combined with the vertical federation learning algorithm and the homomorphic encryption algorithm, the energy big data knowledge in various fields is extracted and encrypted, and the encrypted knowledge is stored in the cloud platform as shared data. After the blockchain module combines the smart contract identification coding and parsing of such shared ciphertext, the ciphertext …key is provided to the data user, and the shared energy big data plaintext is obtained after decryption, so as to realize the real-time security sharing of energy big data. According to the result analysis, the model performs well in data knowledge extraction and encryption, and has a good effect in ensuring the security and reliability of energy big data sharing. At the same time, the identification coding and analysis time of shared data knowledge is relatively short, making energy big data can be shared in real time. These results demonstrate the potential and feasibility of the model in facilitating big data sharing in the energy sector. Show more

Keywords: End cloud collaboration, energy big data, real-time sharing, client, cloud platform, blockchain

DOI: 10.3233/JIFS-234892

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1853-1865, 2024

Authors: Shanthi, A.S. | Ignisha Rajathi, G. | Velumani, R. | Srihari, K.

Article Type: Research Article

Abstract: In older people, mild cognitive impairment (MCI) is a precursor to more severe forms of dementia like AD (AD). In diagnosing patients with primary AD and amnestic MCI, modern neuroimaging techniques, especially MRI, play a key role. To efficiently categorize MRI images as normal or abnormal, the research presents a machine learning-based automatic labelling system, with a focus on boosting performance via texture feature analysis. To this end, the research implements a preprocessing phase employing Log Gabor filters, which are particularly well-suited for spatial frequency analysis. In addition, the research uses Gray Wolf Optimization (GWO) to acquire useful information from …the images. For classification tasks using the MRI images, the research also make use of DenseNets, a form of deep neural network. The proposed method leverages Log Gabor filters for preprocessing, Gray Wolf Optimization (GWO) for feature extraction, and DenseNets for classification, resulting in a robust approach for categorizing MRI images as normal or abnormal. When compared to earlier trials performed without optimization, the proposed systematic technique shows a significant increase in classification accuracy of 15%. For neuroimaging applications, our research emphasizes the use of Log Gabor filters for preprocessing, GWO for feature extraction, and DenseNets for classification, which can help with the early detection and diagnosis of MCI and AD. Show more

Keywords: Dementia, mild cognitive impairment, MRI, AD, Gray Wolf Optimization, DenseNets, log gabor filter

DOI: 10.3233/JIFS-235118

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1867-1879, 2024

Authors: Wang, Kejun | Zhang, Hebing

Article Type: Research Article

Abstract: With the ongoing evolution of the novel coronavirus pathogen and continuous improvements in our social environment, the mortality rate of COVID-19 is on a decline. In response to this, we introduce an adaptive control strategy known as intentional control, which offers cost-efficiency and superior control effectiveness. The classical SEIR model faces limitations in accurately representing close contacts and sub-close contacts and fails to distinguish their varying levels of infectivity. To address this, our study modifies the classical model by incorporating close contact (E) and a sub-close contact (E2) while reworking the infectious mechanism. Once the model is formulated, we employ …various statistical methods to identify crucial parameters, including R 2 , adjusted R 2 , and standard deviation. For disease control, we implement an intentional control program with four distinct grades. We develop and apply a scheme in MATLAB for our proposed model, generating diverse simulation results based on realistic parameter values for discussion. Additionally, we explore a range of strategy combinations to differentiate their effectiveness under various social conditions, aiming to identify an optimal approach. Comparing the intentional control strategy to random control, our findings consistently demonstrate the superiority of intentional control across all scenarios. Furthermore, the results indicate that our approach better aligns with the characteristics of the novel coronavirus, characterized by an “extremely low fatality rate and strong infectivity,” while offering detailed insights into the transmission dynamics among different compartments. Show more

Keywords: COVID-19, SEIR model, intentional control

DOI: 10.3233/JIFS-235149

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1881-1898, 2024

Authors: Li, Zhaowen | Wei, Shengxue | Liu, Suping

Article Type: Research Article

Abstract: Outlier detection is critically important in the field of data mining. Real-world data have the impreciseness and ambiguity which can be handled by means of rough set theory. Information entropy is an effective way to measure the uncertainty in an information system. Most outlier detection methods may be called unsupervised outlier detection because they are only dealt with unlabeled data. When sufficient labeled data are available, these methods are used in a decision information system, which means that the decision attribute is discarded. Thus, these methods maybe not right for outlier detection in a a decision information system. This paper …proposes supervised outlier detection using conditional information entropy and rough set theory. Firstly, conditional information entropy in a decision information system based on rough set theory is calculated, which provides a more comprehensive measure of uncertainty. Then, the relative entropy and relative cardinality are put forward. Next, the degree of outlierness and weight function are presented to find outlier factors. Finally, a conditional information entropy-based outlier detection algorithm is given. The performance of the given algorithm is evaluated and compared with the existing outlier detection algorithms such as LOF, KNN, Forest, SVM, IE, and ECOD. Twelve data sets have been taken from UCI to prove its efficiency and performance. For example, the AUC value of CIE algorithm in the Hayes data set is 0.949, and the AUC values of LOF, KNN, SVM, Forest, IE and ECOD algorithms in the Hayes data set are 0.647, 0.572, 0.680, 0.676, 0.928 and 0.667, respectively. The advantage of the proposed outlier detection method is that it fully utilizes the decision information. Show more

Keywords: Rough set theory, outlier detection, outlier factor, conditional information entropy

DOI: 10.3233/JIFS-236009

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1899-1918, 2024

Authors: Kahraman, Cengiz

Article Type: Research Article

Abstract: The direct assignment of decimal numbers for membership and non-membership degrees of an element in intuitionistic fuzzy sets is not practical. The problem is that the expert cannot assign the same values to the degrees of membership, non-membership and hesitancy in decimal numbers for the same proposition in every attempt. Rather than the former, the assignment of proportional relationships between membership and non-membership degrees is more appropriate. We propose proportion-based models for intuitionistic fuzzy sets that include arithmetic and aggregation operators. Proportional intuitionistic fuzzy (PIF) sets require only the proportion relations between an intuitionistic fuzzy set’s parameters. These models will …make it easier to define intuitionistic fuzzy sets with more accurate data that better represents expert judgments. We transform AHP method, one of the traditional multi-criteria decision making methods, to PIF AHP using PIF sets. We compare the proposed PIF AHP method by interval-valued intuitionistic fuzzy AHP method existing in the literature. A wind turbine selection problem is handled to show the validity of the proposed PIF AHP method. Show more

Keywords: Proportional intuitionistic fuzzy sets, aggregation operators, multi-criteria decision making, AHP

DOI: 10.3233/JIFS-236035

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1919-1933, 2024

Authors: Lai, Yibo | Fan, Libo | Sun, Zhiqing | Fang, Xiang | Shen, Bin | Tu, Yongwei

Article Type: Research Article

Abstract: Aiming at the problems of low convective heat transfer coefficient and high energy consumption in the air-cooled data center of immersed liquid cooling, an improved deep learning algorithm is proposed for the data center system of immersed liquid cooling equipment room. By improving the design of the immersed liquid cooling system, heat exchange is carried out between the immersed liquid cooling system and heating components such as the central processing unit of the server. The insulation coolant and cooling water achieve server heat dissipation through energy exchange, achieving data management of the immersed liquid cooling room. The proposed algorithm improves …data management efficiency while ensuring computational accuracy by conducting in-depth training and learning on the obtained immersed liquid cooling data, thus achieving the management of data in the immersed liquid cooling room. Through experiments, it has been proven that the immersed liquid cooling system in this study has high data management efficiency and low error, and can maintain server memory heat below 37 ° C, with a research accuracy of up to 92%. Show more

Keywords: Immersive liquid cooling, liquid cooling heat exchanger, deep learning, non relaxation hash algorithm, data management system

DOI: 10.3233/JIFS-233140

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1935-1944, 2024

Authors: Wu, Jian-Zhang | Zhang, Xue | Beliakov, Gleb

Article Type: Research Article

Abstract: Both the nonadditivity index and nonmodularity index have emerged as valuable indicators for characterizing the interaction phenomenon within the realm of fuzzy measures. The axiomatic representation plays a crucial role in distinguishing and elucidating the relationship and distinctions between these two interaction indices. In this paper, we employ a set of fundamental and intuitive properties related to interactions, such as equality, additivity, maximality, and minimality, to establish a comprehensive axiom system that facilitates a clear comprehension of the interaction indices. To clarify the impact of new elements’ participation on the type and density of interactions within an initial coalition, we …investigate and confirm the existence of proportional and linear effects in relation to null and dummy partnerships, specifically concerning the nonadditivity and nonmodularity indices. Furthermore, we propose the concept of the t -interaction index to depict a finer granularity for the interaction situations within a coalition, which involves subsets at different levels and takes the nonadditivity index and nonmodularity index as special cases. Finally, we establish and discuss the axiomatic theorems and empirical examples of this refined interaction index. In summary, the contributions of this work shed light on the axiomatic characteristics of the t -interaction indices, making it a useful reference for comprehending and selecting appropriate indices within this category of interactions. Show more

Keywords: Fuzzy measure, capacity, nonadditivity index, nonmodularity index, t-interaction index

DOI: 10.3233/JIFS-233196

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1945-1956, 2024

Authors: Gobinath, C. | Gopinath, M.P.

Article Type: Research Article

Abstract: PURPOSE: Many researchers have found that the improvement in computerised medical imaging has pushed them to their limits in terms of developing automated algorithms for the identification of illness without the need for human participation. The diagnosis of glaucoma, among other eye illnesses, has continued to be one of the most difficult tasks in the area of medicine. Because there are not enough skilled specialists and there are a lot of patients seeking treatment from ophthalmologists, we have been encouraged to build efficient computer-based diagnostic methods that can assist medical professionals in early diagnosis and help reduce the amount of …time and effort they spend working on healthy situations. The Optic Disc position is determined with the help of the LoG operator, and a Disc Image map is projected with the help of a U-net architecture by utilising the location and intensity profile of the optic disc. After this, a Generative adversarial network is suggested as a possible solution for segmenting the disc border. In order to verify the performance of the model, a well-defined investigation is carried out on many retinal datasets. The usage of a multi-encoder U-net framework for optic cup segmentation is the second key addition made by this proposed work. This framework greatly outperforms the state-of-the-art in this area. The suggested algorithms have been tested on public standard datasets such as Drishti-GS, Origa, and Refugee, as well as a private community camp-based difficult dataset obtained from the All-India Institute of Medical Sciences (AIIMS), Delhi. All of these datasets have been verified. In conclusion, we have shown some positive outcomes for the detection of diseases. The unique strategy for glaucoma treatment is called ensemble learning, and it combines clinically meaningful characteristics with a deep Convolutional Neural Network. Show more

Keywords: Glaucoma, Cup-To-Disc Ratio (CDR), neuro-retinal rim (NRR) Loss, peripapillary atrophy (PPA), retinal nerve fiber layer (RNFL), deep convolutional neural network

DOI: 10.3233/JIFS-234363

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1957-1971, 2024

Authors: Li, Junwei | Liu, Huanyu | Jin, Yong | Zhao, Aoxiang

Article Type: Research Article

Abstract: Research on conflict evidence fusion is an important topic of evidence theory. When fusing conflicting evidence, Dempster-Shafer evidence theory sometimes produces counter-intuitive results. Thus, this work proposes a conflict evidence fusion method based on improved conflict coefficient and belief entropy. Firstly, the proposed method uses an improved conflict coefficient to measure the degree of conflict, and the conflict matrix is constructed to get the support degree of evidence. Secondly, in order to measure the uncertainty of evidence, an improved belief entropy is proposed, and the information volume of evidence is obtained by the improve entropy. Next, connecting with the support …degree and information volume, We get the weight coefficient, and use it to modify the evidence. Finally, using the combination rule of Dempster for fusion. Simulation experiments have demonstrated the effectiveness and superiority of the proposed method in this paper. Show more

Keywords: Evidence theory, conflict evidence, conflict coefficient, beleief entropy, combination rule

DOI: 10.3233/JIFS-221507

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1973-1984, 2024

Authors: Yapali, Reha | Korkmaz, Erdal | Çinar, Muhammed | Çoskun, Hüsamettin

Article Type: Research Article

Abstract: The idea of lacunary statistical convergence sequences, which is a development of statistical convergence, is examined and expanded in this study on L - fuzzy normed spaces, which is a generalization of fuzzy spaces. On L - fuzzy normed spaces, the definitions of lacunary statistical Cauchy and completeness, as well as associated theorems, are provided. The link between lacunary statistical Cauchyness and lacunary statistical boundedness with regard to L - fuzzy norm is also shown.

Keywords: ℒ-fuzzy normed space, lacunary double sequences, lacunary statistically convergence, lacunary statistical Cauchy, lacunary statistical boundedness

DOI: 10.3233/JIFS-222695

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1985-1993, 2024

Authors: Prabaharan, P.

Article Type: Research Article

Abstract: Recent developments in wireless sensor networks (WSNs) have generated interest in the area of sensor tracking events. The proposed work aims to decrease energy usage by identifying functional relay nodes utilizing the enhanced energy proficient clustering (EEPC) method. To minimize long-distance interaction between CH and BS, a power-efficient relay chosen technique is proposed using improved Grasshopper Optimization algorithm (IGOA). The network is constructed using both mobile and fixed nodes. Mobile nodes first choose cluster head (CH) among fixed nodes after broadcasting information. Depending on the related positioning and power density, mobile nodes choose their CH. CH receives information from mobile …sensor nodes (SNs). Based on the nodes’ velocity and position, the EEPC method computes particle fitness value and chooses the relay nodes. Performance metrics include Throughput, End-to-End Delay, Packet Delivery Ratio (PDR), Quantity of Received Packets, Total Residual Energy, and Total Energy Consumption, network lifetime. The suggested technique enhances network lifetime and reduces energy consumption when compared to other existing protocols. After 200 simulation rounds, the suggested EEPC displays 98.87% PDR. However, during 200 simulation cycles, ANFISRS, ORNS and DTC-ORS show 97.82%, 96.03%, and 89.585% PDR, respectively. Show more

DOI: 10.3233/JIFS-231729

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 1995-2008, 2024

Authors: Sandhu, Muhammad Abdullah | Amin, Asjad | Tariq, Sana | Mehmood, Shafaq

Article Type: Research Article

Abstract: Dengue mosquitoes are the only reason for dengue fever. To effectively combat this disease, it is important to eliminate dengue mosquitoes and their larvae. However, there are currently very few computer-aided models available in scientific literature to prevent the spread of dengue fever. Detecting the larvae stage of the dengue mosquito is particularly important in controlling its population. To address this issue, we propose an automated method that utilizes deep learning for semantic segmentation to detect and track dengue larvae. Our approach incorporates a contrast enhancement approach into the semantic neural network to make the detection more accurate. As there …was no dengue larvae dataset available, we develop our own dataset having 50 short videos with different backgrounds and textures. The results show that the proposed model achieves up to 79% F-measure score. In comparison, the DeepLabV3, Resnet achieves up to 77%, and Segnet achieves up to 76% F-measure score on the tested frames. The results show that the proposed model performs well for small object detection and segmentation. The average F-measure score of all the frames also indicates that the proposed model achieves a 76.72% F-measure score while DeepLabV3 achieves a 75.37%, Resnet 75.41%, and Segnet 74.87% F-measure score. Show more

Keywords: Dengue larvae, detection, tracking, semantic segmentation, image enhancement

DOI: 10.3233/JIFS-233292

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2009-2021, 2024

Authors: Keikha, Abazar | Sabeghi, Narjes

Article Type: Research Article

Abstract: As the rapidly progressing applications of uncertainty theories, the need for modifications to some of their existing mathematical tools or creating new tools to deal correctly with them in various environments is also exposed. Hesitant fuzzy numbers (HFNs), as a particular case of fuzzy numbers, are not an exception to this rule. Considering the necessity of determining the distance between given HFNs in many of their practical applications, this article shows that the existing methods either do not provide correct results or are not able to meet the needs of users. This paper aims to present new methods for distance …measures of hesitant fuzzy numbers. To do them, three prevalent distance measures, i.e., the generalized distance measure, the Hamming distance measure, and the Euclidean distance measure, will be optimized into three distinct trinal categories. With the approach of reducing error propagation via reducing some unnecessary mathematical computations, new distance measures on HFNs will be introduced, first. The middle is the modification of the first category, which is more suitable when the given HFNs are equal-distance by the previous formula. Also, as the third category, the weighted form of these distance measures has been proposed, to be used where the real and membership parts of HFNs are not of equal importance. As an application of these, a TOPSIS-based technique for solving multi-attribute group decision-making problems with HFNs has been proposed. A numerical example will be implemented to describe the presented method. Finally, along with the validation of the proposed method, its numerical comparison with some other existing methods will be discussed in detail. Show more

Keywords: Hesitant fuzzy numbers, MAGDM, Hamming distance, Euclidean distance, TOPSIS

DOI: 10.3233/JIFS-234619

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2023-2035, 2024

Authors: Yin, Rui | Lu, Wei | Yang, Jianhua

Article Type: Research Article

Abstract: This article has been retracted. A retraction notice can be found at https://doi.org/10.3233/JIFS-219433 .

DOI: 10.3233/JIFS-236087

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2037-2052, 2024

Authors: Bhukya, Raghuram | Vodithala, Swathy

Article Type: Research Article

Abstract: Social media is becoming a crucial part of our everyday lives, whether it’s for product advertising, developing brand value, or reaching out to users. At the same time, sentiment analysis (SA) is a method for determining the emotions associated with online information. The main obstacle to SA’s success is the presence of sarcasm in the text. Previous studies on the identification of sarcasm use lexical and pragmatic signs such as interjection, punctuation, and sentimental change, amongst others. Deep learning (DL) models can be used to learn the lexical and contextual aspects of informal language because handcrafted features cannot be generalised. …In addition, word embedding can be used to train the DL models and provide effective results on big datasets at the same time. Optimal Deep Learning based Sarcasm detection and classification using an ODL-SDC method is presented in this study. ODL-SDC analyses social media data to look for and classify any sarcasm that may have been used there. In addition, the Glove embedding approach is used to transform feature vectors. A approach known as the chaotic crow search optimization on deep belief network (CCSO-DBN) is also used to classify and detect satire. Many benchmark datasets were used to evaluate the ODL-SDC method, and the results show it to be more effective than existing approaches in a number of performance metrics. Show more

Keywords: Sarcasm detection, deep learning, social media, word embedding, feature vectors, classification

DOI: 10.3233/JIFS-222633

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2053-2066, 2024

Authors: Tasbozan, Hatice

Article Type: Research Article

Abstract: Hypersoft set theory represents an advanced version to soft set theory, offering enhanced capabilities for addressing uncertainty. By combining hypersoft set theory with nearness approximation spaces, a novel mathematical model known as near hypersoft set emerges. This hybrid model enables improved decision-making accuracy. In this study, our focus is on selecting an object from a product containing a function parameter set described by a distinct Cartesian feature with multiple arguments. Furthermore, we define fundamental features and topology on this set.

Keywords: Soft sets, near sets, near soft sets, hypersoft set, near hypersoft set

DOI: 10.3233/JIFS-224526

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2067-2076, 2024

Authors: Gong, Zengtai | Jiang, Taiqiang

Article Type: Research Article

Abstract: In the existing conflict analysis models, they used a triangular fuzzy number on [0, 1] to describe the range of an agent’s attitude towards an issue, but there are still some shortcomings in describing the specific attitude and degree of conflict represented by the triangular fuzzy number. In this paper, the conflict analysis model is extended, improved and perfected. Firstly, the expectation of triangular fuzzy number is used in the [-1, 1] triangular fuzzy information system to reasonably express the specific attitudes represented by a triangular fuzzy number. Secondly, the weights of each issue are obtained by using the Sugeno …measure, which determines the total attitude of the agent towards all issues. Thirdly, the relationship between agents is obtained with the help of the weighted distance of triangular fuzzy numbers. Finally, the thresholds α and β are calculated by means of triangular fuzzy decision theory rough sets. Show more

Keywords: Conflict analysis, three-way decisions, triangular fuzzy number

DOI: 10.3233/JIFS-231296

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2077-2090, 2024

Authors: Huang, Juan | Gou, Fangfang | Wu, Jia

Article Type: Research Article

Abstract: With the development of Internet of Things technology, 5G communication has gradually entered people’s daily lives. The number of network users has also increased dramatically, and it has become the norm for the same user to enjoy the services provided by multiple network service providers and to complete the exchange and sharing of a large amount of information at the same time. However, the existing opportunistic social network routing is not sufficiently scalable in the face of large-scale network data. Moreover, only the transaction information of network users is used as the evaluation evidence, ignoring other information, which may lead …to the wrong trust assessment of nodes. Based on this, this study proposes an algorithm called Trust and Evaluation Mechanism for Users Based on Opportunistic Social Network Community Classification Computation (TEMCC). Firstly, communication communities are established based on community classification computation to solve the problem of the explosive growth of network data. Then a trust mechanism based on the Bayesian model is established to identify and judge the trustworthiness of the recommended information between nodes. This approach ensures that more reliable nodes can be selected for interaction and complete data exchange. Through simulation experiments, the delivery rate of this scheme can reach 0.8, and the average end-to-end delay is only 190 ms. Show more

Keywords: Trust mechanism, evaluation mechanism, community, opportunistic social networks

DOI: 10.3233/JIFS-232264

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2091-2108, 2024

Authors: Chen, Rong | Lan, Furong | Wang, Jianhua

Article Type: Research Article

Abstract: In order to effectively control the pressure and energy consumption of multiple air compressors within an acceptable range, an intelligent pressure switching control method for air compressor group control based on multi-agent RL is studied. This method uses sensors in the air compressor field control cabinet to collect data such as header pressure, air storage tank pressure, and air storage tank temperature and sends them to the edge data collector for integration. After integration, the main control cabinet sends them to the upper computer. Combined with the on-site collected data, a multi-agent-based air compressor group control model is designed to …convert multiple air compressors in the air compressor group control problem into a multi-agent mode, facilitating unified switching control of the air compressor group. Then, using the intelligent pressure switching control method based on deep Q-learning, driven by a neural network controller, the frequency of the frequency converter is adjusted to control the pressure at the outlet of the air compressor terminal header within the set value range, completing the pressure intelligent switching control. After testing, this method has good application results in pressure control, energy saving, and other aspects after being used for intelligent pressure switching control of air compressor group control. Show more

Keywords: Multi-agent, intensive learning, air compressor group control, pressure intelligence, neural network controller

DOI: 10.3233/JIFS-233217

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2109-2122, 2024

Authors: Xu, Huifen | Fang, Cheng | Zhang, Shuai

Article Type: Research Article

Abstract: Remanufacturing, with its environmental and economic implications, is gaining significant traction in the contemporary industry. Owing to the complementarity between remanufacturing process planning and scheduling in actual remanufacturing systems, the integrated remanufacturing process planning and scheduling (IRPPS) model provides researchers and practitioners with a favorable direction to improve the performance of remanufacturing systems. However, a comprehensive exploration of the IRPPS model under uncertainties has remained scant, largely attributable to the high complexity stemming from the intrinsic uncertainties of the remanufacturing environment. To address the above challenge, this study proposes a new IRPPS model that operates under such uncertainties. Specifically, the …proposed model utilizes interval numbers to represent the uncertainty of processing time and develops a process planning approach that integrates various failure modes to effectively address the uncertain quality of defective parts during the remanufacturing process. To facilitate the resolution of the proposed model, this study proposes an extended non-dominated sorting genetic algorithm-II with a new multi-dimensional representation scheme, in which, a new self-adaptive strategy, multiple genetic operators, and a new local search strategy are integrated to improve the algorithmic performance. The simulation experiments results demonstrate the superiority of the proposed algorithm over three other baseline multi-objective evolutionary algorithms. Show more

Keywords: Integrated remanufacturing process planning and scheduling, remanufacturing systems, uncertainty environment, interval processing time, non-dominated sorting genetic algorithm-II

DOI: 10.3233/JIFS-233408

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2123-2145, 2024

Authors: Xu, Dongsheng

Article Type: Research Article

Abstract: Universities are important talent training bases in China and the main driving force for achieving the strategic layout of “revitalizing the country through science and education” and “strengthening the country through talent". Oil painting is a global art with rich humanistic and artistic value. Most art colleges in China have set up oil painting courses. Analyze the current situation and value of oil painting course teaching in local art (teacher training) majors, and leverage the educational role of oil painting courses by enriching course offerings, emphasizing the integration of humanistic innovation, improving teacher literacy, and striving to further improve the …quality and efficiency of oil painting course teaching. The quality evaluation of oil painting teaching in universities is viewed as multiple-attribute decision-making (MADM). The grey relational analysis (GRA) is a useful tool to cope with the MADM issue. The probabilistic simplified Neutrosophic set (PSNSs) is easy to characterize uncertain information during the quality evaluation of oil painting teaching in universities. In this paper, in order to obtain the weight information, an optimization model implemented to obtain a simple and exact formula which can be employed to derive the attribute weights values based on the Lagrange function and the probabilistic simplified neutrosophic number grey relational analysis (PSNN-GRA) technique is implemented for MADM to rank the alternatives. Finally, a numerical example for quality evaluation of oil painting teaching in universities is used to verify the practicability of the PSNN-GRA technique and compares it with other techniques. Show more

Keywords: Multiple attributes decision making (MADM), probabilistic simplified neutrosophic sets (PSNSs), GRA technique, teaching quality evaluation

DOI: 10.3233/JIFS-235975

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2147-2159, 2024

Authors: Liu, Chen | Zhou, Kexin | Zhou, Lixin

Article Type: Research Article

Abstract: Stance detection for user reviews on social platforms aims to classify the stance of users’ reviews toward a specific topic. Existing studies focused on the internal semantic features of reviews’ texts, but ignored the external knowledge associated with the review. This paper retrieves external knowledge related to the key information of each review by mapping it to a knowledge graph. Thereafter, this paper infuses the external knowledge into deep learning model for stance detection. Considering that infusing external knowledge may bring noise to the model, this paper adopts the personalized PageRank method to filter the introduced irrelevant external knowledge. Infusing …external knowledge can improve the classification performance by providing background knowledge. In addition to considering the textual features of reviews when constructing the stance detection model, this paper employs a gated graph neural network (GGNN) approach to fuse the structural information between reviews to capture the interactions of reviews. The experiments show that the model improves 1.5% –6.9% in macro-average scores compared to six benchmark models in this paper. By combining the textual features and structural information of reviews and introducing external knowledge, the model effectively improves the stance detection performance. Show more

Keywords: Knowledge graph, structural information, gate graph neural network, stance detection

DOI: 10.3233/JIFS-224217

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2161-2177, 2024

Authors: Jayalakshmi, N. | Shanmugapriya, M.M.

Article Type: Research Article

Abstract: This study provides the generalization of fuzzy real numbers by imposing the elevator’s condition upon it’s legs. Our aim is to construct three types of Lift Fuzzy Real Numbers, an extension of h-generalized fuzzy real numbers, to indicate medical signals, stock market values, and commercial establishment profits over time. It explores concepts like ɛ-cut, strong ɛ-cut, β-level set, and convexity, and presents a graphical representation based on profit earned by three industries. Appropriate numerical examples are provided to support the new ideas. It’s interesting to note that Lift Fuzzy Real Numbers are also used to represent real numbers. Additionally, the …connections between the Lift Fuzzy real numbers have been established. The new fuzzy real numbers offer an advantage in representing data sets not represented by existing fuzzy numbers. Show more

Keywords: Fuzzy set, fuzzy number, α-cut, strong α-cut

DOI: 10.3233/JIFS-224320

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2179-2192, 2024

Authors: Hu, Fang

Article Type: Research Article

Abstract: There is a lack of domestic and foreign research on the evaluation and improvement strategies of business performance of performing arts enterprises, especially in the context of the “restructuring” of cultural groups in China. Most of the existing studies are distributed in bulk, not only lacking in theoretical depth, but also lacking in systematization to a certain extent, which shows that the existing studies have not fully formed a mature and valuable theoretical system. The business performance evaluation of performing arts enterprises is a multiple attributes group decision making (MAGDM). This paper constructs a novel probabilistic hesitant fuzzy Multi-Objective Optimization …Simple Ratio Analysis (PHF-MOOSRA) model based on the integrated determination of objective criteria weights (IDOCRIW) under the probabilistic hesitant fuzzy sets (PHFSs) for this issue. The PHFSs provides an evaluation circumstance containing more information which make the final decision-making results more accurately. Additionally, the IDOCRIW method separately and the MOOSRA method based on the MOORA method is proposed in PHFSs circumstance in this model. In the end, this model is then applied in a numerical case study for business performance evaluation of performing arts enterprises and compare this model with other existing methods. Show more

Keywords: Multiple attributes group decision making (MAGDM), probabilistic hesitant fuzzy sets (PHFSs), MOOSRA method, IDOCRIW method, business performance evaluation

DOI: 10.3233/JIFS-224342

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2193-2205, 2024

Authors: Bhandari, Samir Kumar | De la Sen, Manuel | Chandok, Sumit

Article Type: Research Article

Abstract: In this article, the probabilistic metric distance between two disjoint sets is utilised to define the essential criteria for the existence and uniqueness of the best proximity point, which takes into account the global optimization problem. In order to solve this problem, we pretend that we are trying to obtain the optimal approximation to the solution of a fixed point equation. Here, we introduce two types of probabilistic proximal contraction mappings and use a geometric property called Ω -property in the context of probabilistic metric spaces. We also obtain some consequences for self-mappings, which give the fixed point results. Some …examples are provided to validate the findings. As an application, we obtain the solution to a second-order boundary value problem using a minimum t -norm in the context of probabilistic metric spaces. Show more

Keywords: Probabilistic metric spaces, best proximity point, Ω-property, fixed point

DOI: 10.3233/JIFS-231315

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2207-2218, 2024

Authors: Cui, Tong | Sun, Peixi | Liu, Xiao

Article Type: Research Article

Abstract: Corporate culture has its own development laws and may play a significant role in a short period of time, but its development and improvement are a relatively long-term task. The construction of corporate culture is a systematic project that varies depending on the enterprise. For enterprises, the construction of corporate culture has very important practical significance for the re integration of the enterprise team and the enhancement of competitive strength. Culture is a productive force, and the role of corporate culture is more direct. Therefore, enterprises should focus on their own development goals, create their own unique corporate culture based …on learning and reference, and meet market challenges with a new look and strong strength. The effectiveness evaluation of corporate culture construction is a classical multiple attribute decision making (MADM). Recently, the TODIM and VIKOR method has been used to cope with MADM issues. The neutrosophic cubic sets (NCSs) are used as a tool for characterizing uncertain information during the effectiveness evaluation of corporate culture construction. In this manuscript, the neutrosophic cubic number TODIM-VIKOR (NCN-TODIM-VIKOR) method is built to solve the MADM under NCSs. In the end, a numerical case study for effectiveness evaluation of corporate culture construction is given to validate the proposed method. The research aim of the paper is summarized: (1) the NCN-TODIM-VIKOR is proposed for MADM problem with NCSs; (2) The attributes weight information is obtained through information entropy; (3) the NCN-TODIM-VIKOR method is designed for effectiveness evaluation of corporate culture construction and were compared with some existing methods; (4) Through the comparison, it is found that NCN-TODIM-VIKOR method for effectiveness evaluation of corporate culture construction proposed are effective. Show more

Keywords: Multiple attribute decision making (MADM), Neutrosophic cubic sets (NCSs), TODIM, VIKOR, effectiveness evaluation of corporate culture construction

DOI: 10.3233/JIFS-231841

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2219-2231, 2024

Authors: Hosseini Monfared, Seyede Nasrin | Hosseinzadeh Lotfi, Farhad | Mozaffari, Mohammad Reza | Rostamy malkhalifeh, Mohsen

Article Type: Research Article

Abstract: In conventional DEA models it has been assumed that each measure status is considered input or output. However, a performance measure in some cases can have input role for some DMUs and output role for others and is known as flexible measure. In this paper new slacks-based FNSBM models are proposed in general two-stage network DEA to determine the relative efficiency of units and the role of flexible measures. Then new radial FNDEA-R models and new slacks-based FNSBM-DEA-R models are developed in the presence of flexible measures based on the ratio of input components to output components or vice versa …in the input and output orientation under constant returns to scale in general two-stage network. In our proposed models, flexible measures are determined as input or output to improve performance to maximize the relative efficiency of the DMU under evaluation. The FNDEA-R and FNSBM-DEA-R models versus FNSBM models prevent efficiency underestimation and pseudo inefficiency issues. The status of one flexible measure in the input-oriented and output-oriented FNDEA-R and FNSBM-DEA-R models may have different conclusions. The radial FNDEA and FNDEA-R models have unitsinvariant and the objective function of the FNSBM and FNSBM-DEA-R models are invariant with respect to the units of data. A numerical example is used to illustrate the procedures. Show more

Keywords: Data envelopment analysis, flexible measures, SBM model, ratio analysis, general two-stage network

DOI: 10.3233/JIFS-231925

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2233-2259, 2024

Authors: Kumar, Ashish | Maan, Vijay Singh | Choudhary, Ravi | Saini, Monika

Article Type: Research Article

Abstract: The main objective of present investigation is to evaluate and optimize the operational availability of the solar photovoltaic systems. As the solar energy is a prominent source of renewal energy and contribute a lot in global development having less environmental impacts but the safety and reliability issues of these systems also observed during the operational phase. Availability is an effective tool that is used to discourse the safety and performance issues of renewal energy sources especially solar photovoltaic systems. Here, a stochastic model is developed for solar photovoltaic system having solar photovoltaic plates, solar charger, solar battery, and inverter. The …Markov birth-death process is applied for development of the mathematical model of the proposed system. The chapman-Kolmogorov differential difference equations of the proposed solar photovoltaic system used to predict the steady state availability of system. On the basis of literature, the failure and repair rates of all components of solar photovoltaic system are considered as exponentially distributed. In addition, an effort is also made to predict the optimum availability of solar photovoltaic system using well-known optimization technique cuckoo search algorithm. It is revealed that, the predicted availability of the solar photovoltaic system is 0.9988799 at population size 60 after 700 iterations. The estimated parametric values of the failure and repair rates also derived. To highlight the importance of the study the numerical and graphical results are presented and shared with the system designers and maintenance engineers. Show more

Keywords: Renewal energy sources, solar photovoltaic systems, markov models, cuckoo search algorithm, availability

DOI: 10.3233/JIFS-231940

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2261-2272, 2024

Authors: Elrawy, A. | Smarandache, Florentin | Temraz, Ayat A.

Article Type: Research Article

Abstract: We use a neutrosophic set, instead of an intuitionistic fuzzy because the neutrosophic set is more general, and it allows for independent and partial independent components μ (χ) , γ (χ) , ζ  (χ), while in an intuitionistic fuzzy set, all components are totally dependent. In this article, we present and demonstrate the concept of neutrosophic invariant subgroups. We delve into the exploration of this notion to establish and study the neutrosophic quotient group. Further, we give the concept of a neutrosophic normal subgroup as a novel concept.

Keywords: Neutrosophic set, invariant sub-groups, normal sub-group

DOI: 10.3233/JIFS-232941

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2273-2280, 2024

Authors: Mu, Li

Article Type: Research Article

Abstract: The financial management capability of enterprises, as an important component of their soft power, has a decisive impact on the success or failure of their operations. In the increasingly fierce market competition, enterprises must continuously improve their financial management capabilities in order to ensure efficient operation and achieve better economic benefits. Insufficient financial management capabilities in enterprises can seriously affect the stability of production and operation, hinder the realization of profits, and hinder the long-term development of enterprises. In order to better improve the financial management level of enterprises and promote the standardization of financial management, it is necessary to …use scientific techniques to evaluate the financial management ability of enterprises, so as to accurately grasp the key links in the financial management process of enterprises and implement targeted effective measures. The enterprise financial management capability evaluation is a classical multiple attribute group decision making (MAGDM). In recent years, the MAGDM problem has become an important research field in modern decision science. This paper extends the EDAS technique to the 2-tuple linguistic Pythagorean fuzzy sets (2TLPFSs). On the basis of the original EDAS technique, 2-tuple linguistic Pythagorean fuzzy number EDAS (2TLPFN-EDAS) technique based on cosine similarity measure (CSM) and Hamming distances is managed for MAGDM. Finally, a case study for enterprise financial management capability evaluation and some comparative analysis with the other techniques show that the new technique proposed in this paper is effective, reasonable and accurate. The main contribution of the paper is summarized: (1) the 2TLPFN-EDAS technique based on CSM and Hamming distances is managed for MAGDM under 2TLPFSs; (2) The entropy is employed to manage the attribute weight based on cosine similarity measure(CSM) and Hamming distances under 2TLPFSs; (3) the 2TLPFN-EDAS technique is employed for enterprise financial management capability evaluation and were compared with some existing techniques; (4) Through the comparison, it is found that 2TLPFN-EDAS technique for enterprise financial management capability evaluation proposed are effective. Show more

Keywords: Multiple attribute group decision making (MAGDM), 2-tuple linguistic Pythagorean fuzzy sets (2TLPFSs), EDAS technique, financial management capability

DOI: 10.3233/JIFS-233395

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2281-2296, 2024

Authors: Alkhalifah, Eman S.

Article Type: Research Article

Abstract: A satisfactory graphic design and good-looking 3D models and environments are the backbones of a positive user experience, especially in Augmented Reality (AR) / Virtual Reality (VR) app development. Where these technologies is seen as the an excellent realm of human-computer interaction. The purpose is to fool the viewer by the seamless incorporation of simulated features. Every AR system relies on true interaction and three-dimensional registration to function properly. In this research, we present a strategy for real-world 3D image registration and tracking. The primary foci of this study are the first three stages: initial registrations and matrix acquisitions, road …scene feature extraction, and virtual information registration. At initial registration, a rough virtual plane is estimated onto which the objects will be projected. To this, we propose YoloV3 for transferring features from a virtual to a real-world setting. The projection process concludes with a guess at the camera’s posture matrix. This tech is used in the vehicle’s head-up display to augment reality. The average time required to register a virtual item is 43 seconds. The final step in making augmented reality content is to merge the computer-generated images of virtual objects with real-world photographs in full colour. Our results indicate that this method is effective and precise for 3D photo registration but has the potential to dramatically increase the verisimilitude of AR systems. Show more

Keywords: Graphic designs, human-computer interaction, computer vision, real-scene, AR/VR applications, 3D image registration, and tracking and mapping

DOI: 10.3233/JIFS-233878

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2297-2309, 2024

Authors: Meera, S. | Valarmathi, K.

Article Type: Research Article

Abstract: Load balancing is an element that must exist for a cloud server to function properly. Without it, there would be substantial lag and the server won’t be able to operate as intended. In a Cloud computing (CC) establishing, load balancing is the process of dividing workloads and computer resources. The distribution of assets from a data centre involves many different factors, including load balancing of workloads in cloud environment. To make best use each virtual machine’s (VM) capabilities, load balancing needs to be done in a way that ensures that all VMs have balanced loads. Both overloading and underloading are …examples of load unbalance, and both of these types of load unbalance could be fixed by using techniques created especially for load balancing. The research that has been done on the subject have not attempted to take into account the factors that affect the problem of load unbalancing. Results indicate that the LSTM and DForest-based load balancing approach significantly improves cloud resource utilization, reduces response times, and minimizes the occurrence of overloading or underloading scenarios. To effectively design those programmes, it is essential to first understand the advantages and disadvantages of current methodologies before developing efficient AI-based load balancing programmes. Compared to existing method the proposed method is high accuracy 0.98, KNN accuracy is 0.97, SVM accuracy is 0.99, and DForest accuracy is 0.987. Show more

Keywords: Load balancing, artificial intelligence, machine learning, DForest, Long Short-Term Memory

DOI: 10.3233/JIFS-234054

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2311-2330, 2024

Authors: Yalçın, Selin | Kaya, İhsan

Article Type: Research Article

Abstract: Process capability analysis (PCA) is an important stage to check variability of process by using process capability indices (PCIs) that are very effective statistics to summarize process’ performance. Traditional PCIs can produce some incorrect results and declare misinterpretation about process’ quality if the process includes uncertainties. Additionally, definitions of process’ parameters with exact values is not possible when there are uncertainty caused by measurement errors, sensitivities of measuring instruments or quality engineers’ hesitancies. Although the fuzzy set theory (FST) has been successfully used in PCA, it is the first time to use of Pythagorean fuzzy sets (PFSs) to model uncertainties …of process more than traditional fuzzy sets in PCA. Since the PFSs has two-dimensional configurations by defining membership and non-membership values, they also have a huge ability to model uncertainty that arises from the human’s thinking and hesitancies, and has brought flexibility, sensitivity and reality for PCA. In this paper, specification limits (SLs), mean (μp ), standard deviation (σ ) and target value (T ) main parameters of PCIs have been analyzed by using PFSs and Pythagorean fuzzy process capability indices (PFPCIs) for two well-known PCIs such as ( C ˜ pm ) and ( C ˜ pmk ) have been derived. The Pythagorean ( C ˜ pm ) and ( C ˜ pmk ) indices have also been applied and tested on some numerical examples based on real case applications from manufacturing industry. The obtained results show that PFPCIs provide wider knowledge about capability of process and to obtain more realistic results. As a result of considering all possibilities about the process, it has been concluded that the process is incapable. In light of this information, the results obtained using different fuzzy set extensions for (C pm ) and (C pmk ) indices can be compared. Show more

Keywords: Process capability analysis, process capability indices, flexible parameters Pythagorean fuzzy sets

DOI: 10.3233/JIFS-234683

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2331-2355, 2024

Authors: Xu, Xuezhu

Article Type: Research Article

Abstract: Sports events, as large-scale events that provide products and services, have received widespread attention for their economic benefits and influence. Event organizers expect to achieve high efficiency by providing high-quality products and services. The quality of competition products and services is mainly evaluated through the subjective feelings of the audience, and usually the audience’s evaluation of service quality is vague. Therefore, this article intends to establish an evaluation index system for the quality of spectator service in sports events, in order to provide a reasonable evaluation of the service products provided by sports event organizers. The audience service quality evaluation …for large-scale sports-events is a MAGDM problems. Recently, the EDAS and CRITIC technique has been employed to cope with MAGDM issues. The interval neutrosophic sets (INSs) are employed as a tool for characterizing uncertain information during the audience service quality evaluation for large-scale sports-events. In this paper, the interval neutrosophic number EDAS (INN-EDAS) technique based on the Hamming distance and Euclid distance is founded to manage the MAGDM under INSs. The CRITIC technique is employed to obtain the weight information based on the Hamming distance and Euclid distance under INSs. Finally, a numerical case study for audience service quality evaluation for large-scale sports-events is employed to validate the proposed technique. The main contributions of this paper are proposed: (1) The INN-EDAS technique based on the Hamming distance and Euclid distance is founded to manage the MAGDM under INSs; (2) The CRITIC technique is employed to obtain the weight information based on the Hamming distance and Euclid distance under INSs; (3) a numerical case study for audience service quality evaluation for large-scale sports-events is employed to validate the proposed technique. Show more

Keywords: Multiple attribute group decision making (MAGDM), interval neutrosophic sets (INSs), EDAS technique, CRITIC technique, audience service quality evaluation

DOI: 10.3233/JIFS-236124

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2357-2370, 2024

Authors: Liu, Mingtang | Zhang, Mengxiao | Zhang, Peng | Wang, Guanghui | Chen, Xiaokang | Zhang, Hao

Article Type: Research Article

Abstract: Aiming at the shortcomings of traditional water level prediction methods such as insufficient information mining ability and unclear mechanism of heuristic algorithms, this paper proposes for the first time a water level prediction method based on blockchain technology fused with long short-term memory (LSTM) network. The method utilizes blockchain and LSTM neural network to build a combined model, and directly uploads monitoring data such as import and export water flow and water level to predict the water level, which avoids the secondary error brought by the indirect calculation of flow. In this paper, the flow compensation strategy is proposed for …the first time, and the monitoring data with large deviations are compensated accordingly to reduce the prediction error from the source. The results show that the combined Blockchain-LSTM model has the smallest prediction error after adopting the compensation strategy, with the MAE of 0.290 and the RMSE of 0.490, which are smaller than those of other models, and has high prediction accuracy and practicability, which provides technical support for real-time scheduling of the South-to-North Water Diversion Reservoir. Show more

Keywords: LSTM, Blockchain-LSTM, water level prediction, compensation strategy

DOI: 10.3233/JIFS-231411

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2371-2380, 2024

Authors: Ameksa, Mohammed | Elamrani Abou Elassad, Zouhair | Elamrani Abou Elassad, Dauha | Mousannif, Hajar

Article Type: Research Article

Abstract: This article has been retracted. A retraction notice can be found at https://doi.org/10.3233/JIFS-219433 .

DOI: 10.3233/JIFS-232078

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2381-2397, 2024

Authors: Arulalan, V. | Premanand, V. | Kumar, Dhananjay

Article Type: Research Article

Abstract: An efficient model to detect and track the objects in adverse weather is proposed using Tanh Softmax (TSM) EfficientDet and Jaccard Similarity based Kuhn-Munkres (JS-KM) with Pearson-Retinex in this paper. The noises were initially removed using Differential Log Energy Entropy adapted Wiener Filter (DLE-WF). The Log Energy Entropy value was calculated between the pixels instead of calculating the local mean of a pixel in the normal Wiener filter. Also, the segmentation technique was carried out using Fringe Binarization adapted K-Means Algorithm (FBKMA). The movement of segmented objects was detected using the optical flow technique, in which the optical flow was …computed using the Horn-Schunck algorithm. After motion estimation, the final step in the proposed system is object tracking. The motion-estimated objects were treated as the target that is initially in the first frame. The target was tracked by JS-KM algorithm in the subsequent frame. At last, the experiential evaluation is conducted to confirm the proposed model’s efficacy. The outcomes of Detection in Adverse Weather Nature (DAWN) dataset proved that in comparison to the prevailing models, a better performance was achieved by the proposed methodology. Show more

Keywords: Object detection, adverse weather, weiner filter, object tracking, Retinex

DOI: 10.3233/JIFS-233623

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2399-2413, 2024

Authors: Wang, Yao | Yu, Tao | Luo, Tianmin | Ye, Haojie | Pan, Yiru

Article Type: Research Article

Abstract: Fault detection and diagnosis in electrical machines are periodical for preventing operational interruptions and unexpected shutdowns. However, a Wavelet Feature-dependent Clustering Technique (WFCT) is introduced to address the cyclic fault detection between successive operation intervals. This technique identifies override features from the time-frequency operational wavelets throughout the machine running time. This grouping binds time and operational frequency for identifying override exceeding shutdown/ failure instances. Based on their revamping time, the identified instances are further grouped to prevent overrides in successive operational hours. The fuzzy clustering prevents variation features based on conventional to high-fuzzified extractions.

Keywords: Electrical machines, fault diagnosis, feature extraction, fuzzy clustering, time-frequency wavelet

DOI: 10.3233/JIFS-234256

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2415-2431, 2024

Authors: Muniz, Rafael Ninno | de Sá, José Alberto Silva | da Rocha, Brigida Ramati Pereira | Buratto, William Gouvêa | Nied, Ademir | da Costa Jr., Carlos Tavares

Article Type: Research Article

Abstract: Energy sustainability indicators are essential for evaluating and measuring energy systems’ environmental, social, and economic impact. These indicators can be used to assess the sustainability of different energy sources, such as renewable or fossil fuels, as well as the performance of energy systems in various regions or countries. The goal of this paper is to propose a new energy sustainability index based on fuzzy logic for the Amazon region. The fuzzy inference system enabled the operationalization of subjective sustainability concepts, resulting in a final index that can evaluate the performance of the states in the Legal Amazon and compare them …to each other. The results indicated that Mato Grosso had the highest ranking, followed by Tocantins, Amapá, Roraima, Rondônia, Pará, Acre, Maranhão, and Amazonas in the last position. These findings demonstrate that the selected indicators and the final index are effective tools for evaluating the energy sustainability of the Amazon region and can aid public managers in making decisions and proposing sustainable regional development policies for the region. Show more

Keywords: Amazon, energy planning, fuzzy logic, indicators, sustainability

DOI: 10.3233/JIFS-235750

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2433-2446, 2024

Authors: Sweatha, S. | Sindu Devi, S.

Article Type: Research Article

Abstract: During the period of 2019–20, forecasting was of utmost priority for health care planning and to combat COVID-19 pandemic. Almost everyone’s life has been greatly impacted by COVID-19. Understanding how the disease spreads is crucial to know how the disease behaves dynamically. The aim of the research is to construct an SEI Q 1 Q 2 R model for COVID-19 with fuzzy parameters. The fuzzy parameters are the transmission rate, the infection rate, the recovery rate and the death rate. We compute the basic reproduction number, using next-generation matrix method, which will be used further to study the model’s …prediction. The COVID-free and endemic equilibrium points attain local and global stability when R0  < 1. A sensitivity analysis of the reproduction number against its internal parameter has been done. The results of this model showed that intervention measures. The numerical simulation along with graphical representations at COVID-free and endemic points are shown. The SEIQ 1 Q 2 R model is a successful model to analyse the spreading and controlling the epidemics like COVID-19. Show more

Keywords: Stability, fuzzy basic reproduction number, sensitivity analysis

DOI: 10.3233/JIFS-231945

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2447-2460, 2024

Authors: Saranya, D. | Bharathi, A.

Article Type: Research Article

Abstract: A sudden increase in electrical activity in the brain is a defining feature of one of the severe neurological diseases known as epilepsy. This abnormality appears as a seizure, and identifying seizures is an important field of research. An essential technique for examining the features of neurological issues brain activities, and epileptic seizures is electroencephalography (EEG). In EEG data, analyzing epileptic irregularities visually requires a lot of time from neurologists. For accurate detection of epileptic seizures, numerous scientific techniques have been used with EEG data, and most of these techniques have produced promising results. For EEG signal classification with a …high classification accuracy rate, the present research proposes an enhanced machine learning-based epileptic seizure detection model. The present research provides a hybrid Improved Adaptive Neuro-Fuzzy Inference System (IANFIS)-Light Gradient Boosting Machine (LightGBM) technique for automatically detecting and diagnosing epilepsy from EEG data. The experimental findings were supported by EEG records made available by the German University of Bonn and scalp EEG data acquired at Children’s Hospital Boston. The suggested IANFIS-LightGBM, according to the results, offers the most significant classification accuracy ratings in both situations. Show more

Keywords: Electroencephalography (EEG), epileptic seizure detection, machine learning, LightGBM, and accuracy rate

DOI: 10.3233/JIFS-233430

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2463-2482, 2024

Authors: Subbiah, Priyanga | Nagappan, Krishnaraj

Article Type: Research Article

Abstract: Since it satisfies all prerequisites for the growth of humanity, agriculture is currently regarded as being the most significant sector for civilization. One of the main forms of human energy production is thought to be plants, which also provide nutrients, cures, etc. Any damage or disease brought on by exposure to pathogens, viruses, bacteria, etc., while cultivating plants results in a decline in productivity, making it crucial to prevent such diseases and take the required precautions to avoid them. Accurately identifying such fatal diseases is a crucial first step for both the businesses and farmers. Six different Convolutional Neural Networks …(CNNs) that accept plant leaf images as input, along with the Enhanced Symbiotic Organism Search (ESOS) optimization algorithm, have been implemented in our research. We intend to extensively contrast the various models based on accuracy, precision, recall, and F1-score. In the area of image recognition and classification, convolutional neural networks (CNNs), in particular, and deep learning, in general, are developing. The literature contains a variety of CNN designs. The dataset size, the number of classes, the model’s weights, hypermeters, and optimizers are a few examples of the variables that have an impact on a CNN model’s performance. Because of its benefits, transfer learning and fine-tuning a pre-trained model are now very popular. This study examines the impact of six popular CNN models: DenseNet, MobileNet, EfficientNet, VGG19, ResNet and Inception. As a result, DenseNet demonstrates an optimal accuracy rate of 98% when compared to other models. Show more

Keywords: Plant disease detection, tomato plant leaf disease detection, deep learning, CNN, DenseNet, MobileNet, EfficientNet, VGG19, ResNet and inception

DOI: 10.3233/JIFS-232067

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2483-2494, 2024

Authors: Jenifer, L. | Radhika, S.

Article Type: Research Article

Abstract: Cardiovascular disease is the leading cause of death and more than half million people were died around the world. However, cardiovascular health monitoring is crucial for effective heart disease diagnosis and management. In this paper, a novel deep learning-based YOLO-ECG model is proposed to ECG arrhythmia classification method for portable monitoring. Initially, the ECG signals are gathered using 12-lead electrodes in the real time and these signals are denoised using two-dimensional stationary wavelet transform (2D-SWT). In SWT, zeros are inserted between filter taps rather than decimal points to eliminate repetitions and increase robustness. The denoised ECG signals are fed into …the deep learning-based YOLO network with Gaussian error linear unit (GELU) activation function for detecting the ECG abnormalities of arrythmia. ECG waveforms are analyzed for the local fractal dimension at each sample point before heartbeat waveforms are extracted within a set length window. A squeeze and excitation attention (SEAN) module is introduced in the YOLO network for selecting size of 1D convolution kernel, and the dimension is preserved during local cross-channel interactions, decrease network complexity and enhance model efficiency. The classification findings demonstrate that the proposed YOLO-ECG model performs better by ECG recordings from the MIT-BIH arrhythmia dataset. From the experimental analysis, the proposed YOLO-ECG model yields the overall accuracy of 99.16% for efficient classification of arrythmia ECG signals. Show more

Keywords: Arrythmia classification, ECG signal, deep learning, 2D stationary wavelet transform, YOLO network

DOI: 10.3233/JIFS-235858

Citation: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 1, pp. 2495-2505, 2024