Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 290.00Impact Factor 2024: 1.1
The aim of the International Journal of Applied Electromagnetics and Mechanics is to contribute to intersciences coupling applied electromagnetics, mechanics and materials. The journal also intends to stimulate the further development of current technology in industry. The main subjects covered by the journal are:
- Physics and mechanics of electromagnetic materials and devices
- Computational electromagnetic in materials and devices
- Applications of electromagnetic fields and forces
The three interrelated key subjects - materials, electromagnetics and mechanics - include the following aspects: control, micromachines, intelligent structure, inverse problem, eddy current analysis, electromagnetic NDE, magnetic materials, magnetoelastic effects in materials, bioelectromagnetics, magnetosolid mechanics, magnetic levitations, applied physics of superconductors, superconducting magnet technology, superconducting propulsion system, nuclear fusion reactor components and wave propagation in electromagnetic fields.
Authors: Meng, Kai | Gu, Yong | Ma, Jianhui | Liu, Xidong | Geng, Xiangqian | Liu, Yuxi | Liu, Xuhe | Zhang, Haoming | Shao, Fengxiang
Article Type: Research Article
Abstract: In this study, a novel negative stiffness spring is developed. The developed spring possesses the characteristics of the controllable stiffness and can be employed in vibration isolation system with a low resonance frequency. The controllable electromagnetic negative stiffness spring (CENSS) is obtained by the coaxial permanent magnets (PMs) and the circular current-carrying coils. The stiffness control is accomplished by changing the current in the coils. Furthermore, the mathematical model of CENSS is established, based on the filament method. According to the model, the relationship between the exciting current and the axial stiffness is obtained. Moreover, the influence of the structural …parameters of CENSS on the magnetic force and the stiffness is analyzed. The results demonstrate that the thickness of PMs and the coils have the ability to adjust the range of the negative stiffness. Finally, performance experimental study of CENSS in the stiffness domain is carried out under different exciting currents and thicknesses. The experimental results have shown a good agreement with the model. It demonstrates that the performance of negative stiffness in CENSS can be controlled efficiently by the exciting current and optimized by the thickness. Show more
Keywords: Magnetic stiffness, electromagnetic springs, negative stiffness, vibration isolation
DOI: 10.3233/JAE-201561
Citation: International Journal of Applied Electromagnetics and Mechanics, vol. 65, no. 4, pp. 781-802, 2021
Authors: Liu, Chuan | Chen, Renwen | Zhang, Yuxiang | Wang, Liping | Qin, Jinchang
Article Type: Research Article
Abstract: Converting persistent and renewable wave energy into electricity has been studied in recent years. This research develops a novel fully floating three-body direct-drive wave energy converter (DD-WEC) prepared for the research of the multi-body DD-WEC. Its prototype consists of three floating bodies, but both three bodies act as buoys to extract the wave energy, not just a body. And the relative motion of the buoys induces the voltage in Halbach array permanent magnet linear generators coils. Its feasibility is investigated theoretically by analyzing the dynamics of motion of the floating buoys. As a result, parametric design of the WEC is …achieved. The load performance of the DD-WEC is investigated by using the Simulink, and it can be found that the relative displacements between buoys are different. Then, the electromagnetic power of the proposed WEC is much higher compared to a two-body DD-WEC by using numerical simulation Finally, the DD-WEC prototype is manufactured and tested in the wave tank. The results show that the WEC can produce the most electricity for the case with the wave period of 1.6 s, and the maximum voltage reaches 14.2 V, which is consistent with the simulation results. The results show that the proposed DD-WEC is well suited for wave energy conversion. Show more
Keywords: Three-body, direct-drive wave energy converter, Halbach permanent magnet linear generator, electromagnetic power
DOI: 10.3233/JAE-201566
Citation: International Journal of Applied Electromagnetics and Mechanics, vol. 65, no. 4, pp. 803-818, 2021
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]